Rtv-2 room-temperatue sulfureted silicon rubber Silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts, lighting and candle crafts.
Silicon ingot Silicon ingot, cement, steam coal
Silicone sealant The shundes-280n is a low moudulus silicone sealant which offers outstanding performance accoss a wide variety of glazing and construction application.It has excellent adhesion to glass, brickwork, pleastic and so on. 280ml(25/card)
Silicone cable, silicone profile, silicone tube, wire harness, cable harness, cable group, silicone.
Silicone oil for sealant silicone 100cs 350cs 1000cs
SEP-9200 is a one component silane end-capped polyether sealant, containing no solvent, no isocyanate, no small organic silicon molecule nor polymer.It's environmental friendly, low VOC, without contaminating substrate. It is cured by absorbing the moisture in the air at room temperature.Usually not need a primer before apply. It could adapt to thermal expansion and contraction due to inherent elasticity,It performs good adhesive to variety of construction materials such as concrete, cement, stone, glass, etc., therefore it could be commonly used.It has following characteristics: Good operability: one component, easy to apply. Environmental friendly: no solvent, low VOC, without dirt substrate. Good adhesive for variety materials, such as concrete, cement, stone, glass,etc. Excellent weather resistance Paintable
SEP2910 is a one-component high-performance anti-mold sealant, solvent-free, no free isocyanate, no silicone small molecules and polymers, no pollution of the substrate, low VOC and environmental friendly. It is cured by reaction with moisture in the air, and can be cured at room temperature. No primer required. And it can be used as building decoration gap filing and sealing. It is long-lasting anti-mold. Good operability: one component, easy to apply. Environmental friendly: no solvent, low VOC, without pollution of substrate. ood adhesive for various materials, such as glass, metal, PVC,ABS,PC,PET,PBTetc. Excellent weather resistance Paintable
SEP-1900 is a one component sealant based on silane end-capped polyether, without solvent, free isocyanate, small organic silicon molecule and polymer.It is environmental friendly, low VOC, and would not dirt the substrate, which is curing by absorbing the moisture from air in the room temperature.It performs excellent bonding to variety of construction materials, such as concrete, cement, stone, glass, ABS, PC, etc., therefore it could be widely used in construction and infrastructure areas.It has following characteristics: ï??High transparency, would not turn yellow. ï??Good operability: one component, easy to apply. Environmental friendly: no solvent, low VOC, without dirt the substrate. Excellent adhesive: bond well to variety materials, such as concrete, cement, stone, glass, and other construction materials.
MS2000 is a one component silane end-capped polyether sealant, containing no solvent, no isocyanate, no small organic silicon molecule nor polymer. It's environmental friendly, low VOC, without contaminating substrate. It is cured by absorbing the moisture in the air at room temperature. Usually not need a primer before apply. It could adapt to thermal expansion and contraction duo to inherent elasticity, It performs good adhesive to variety of construction materials such as concrete, cement, stone, glass, etc., therefore it could be commonly used.
AS606 is one-component acrylic emulsion based sealant reinforced with silicone emulsion. It has superior adhesion and good elasticity. Sealing of low movement joints between various construction materials(wood, concrete, brick etc.) Sealing joints between windows, walls, doors etc. Filling cracks in walls and on ceilings.
100E Universal Silicone Sealant 100E is an one-component acetoxy cure silicone sealant for a range of general sealing and glazing applications. It provides a strong adhesion and suitable for use on common non-porous building materials. Stays permenantly elastic after curing. Remains flexible in low and high temperatures. Resistant to temperature exteremes. Resistance to aging, cracking and discoloring.
905N a neutral cure, premium performance silicone sealant designed for gap filling and sealing in a wide range of use in building and construction. It combines the advantages of outstanding adhesion to building materials and non-corrosive and odorless 100% solventless silicone. Excellent weatherproof and UV resistant. No Cracking or Shrinking,Water resistant. Very low odor and noncorrosive. Excellent flexibility and adhesion to numerous porous and non-porous. Substrates for large scale construction and glazing applications. Resistant to temperature extremes (-60 C to +180 C) Fast curing, low modulus, high elasticity. High viscosity non slump formula.
Akfix 647FC is a one-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to sheet iron, aluminum, stainless steel, lead, copper, ceramic, wood etc. Permanently flexible Non-sag consistency - Exceptionally thixotropic Non-sticky / does not pick up dirt No change in volume Easy to gun, can be easily smoothed Over-paintable
A) Type of Wafer >Wafer : 6"-12" >Dummy/Monitor/Prime/Spacer Test Wafer 6" - 12" >Thin Wafer Thicknesss : 150um - 850um >Aluminium Wafer : 6" to 12" >Test Wafer / Oxide Wafer : 6" - 12" >Special Wafer (Nitride, SiC, LT, LN, SOI....etc) B) Types of Wafer Services > Various level (Dummy, Monitor Prime, Test, Spacer, Reclaim) >Chemical/Electroless Plating Services on Ti, Cu, AI Pad. Shipping Boxes Range: >FOSB,FOUP >Cassette: 2-12inch >MW type >Entegris type >Pizza Box
General Purpose Acetic silicone sealant Product Features Acetic cureing , quickly curing, excellent adhesion Excellent resistance to low and high temperature change Good anti-aging propetry Main Appplication All kinds of glass engineering bonding and sealing. Used for bonding various glass cabinets Storage 12 months under dry codition ,blow 27 Package 260ml/300ml 24 pieces per carton
Silway 714 water repellent is a water-dilutable solution of potassium methyl siliconate designed to impart water repellency to a wide variety of surfaces. Supplied at a concentration of 42 percent in water. Silway 714 water repellent reacts with carbon dioxide in the air to form am insoluble water-resistant treatment within 24 hours. KEY FEATURES: * Reduce water absorption into the substrate, thus reducing spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate. * Colorless and non-yellowing protection preserves the natural appearance of the substrate. * Penetrating and breathable * Low VOC * Nonflammable
Acetic GP Silicone removable Sealant fact cure sealant adhesive for indoor Supply Ability: 1000000 Piece/Pieces per Month high quality windshield structural auto glass silicone sealant Packaging & Delivery Packaging Details For 260ml,24pcs/carton,carton size:295*195*24mm,2080ctns/20ft For 300ml,24pcs/carton,carton size:307*207*250mm,1850ctns/20ft For 590ml,20pcs/carton,carton size:360*250*200mm,1550ctns/20ft Port: Qingdao Port Lead Time : 5-15 days, depends on order details, payment time Colors: Clear, Black, White, Grey, Brown, Bronze , requested by customer 2019 New Arrival Free Samples Mirror Glass Window Car Windshield Rubber adhesive for corian Performance Standard Measured Value Testing Method Test at 50±5% RH and temperature 23±20C: Density (g/cm3) ±0.1 0.97 GB/T 13477 Tack-Free Time (min) 180 12 GB/T 13477 Tack-Free Time (min) 80 1000 GB/T 13477 Tensile Modulus (Mpa) /23 0.4 0.18 GB/T 13477 Slumpability (mm) vertical not change shape not change shape GB/T 13477 Slumpability (mm) horizontal 30 GB/T 13477 Curing Speed (mm/d) 23 As Cured -After 21 days at 50±5% RH and temperature 23±20C: Hardness (Shore A) 20~60 34 GB/T 531 Tensile Strength under Standard Conditions (Mpa) / 0.4 GB/T 13477 Elongation of Rupture (%) / 88 GB/T 13477 Movement Capability (%) 20 20 GB/T 13477 Storage 12 Months Characteristic 1.Single-component compound , de-oxime neutral curing, medium/highly modulus. 2.High tensile strength, good expanding performance, excellent bonding strength. 3.Excellent unprimed adhesion to most common building substrates. 4.After curing form a cold and heat resistance. Non-corrosive. Flexible sealant body. 5.Waterproof, age resistance, ultraviolet and ozone resistance. 6.Good capability with other follow series silicone sealing.With years of export experience along with excellent quality, Main Function 1.Structural glazing and sealing for glass curtain wall. Stone curtain wall (marble granite ) aluminum curtain wall and metal structure engineering. 2.Lighting ceiling sealing, the second sealing for insulation glass, stagger and opposite adhesion between glass and glass. 3.Semi-hidden framed and hidden frame engineering curtain wall sealing. 4.Other architectural and industrial sealing.
Acrylic sealants are based on acrylic polymers and are recognised by several other names including decorators caulk, painters caulk or decorators acrylic. They are traditionally used as an economical filler and sealant mainly internally however some can be used externally.
General Purpose Silicone Sealant is an anti-bacterial; single component Acetoxy range sealant, which is cured by atmospheric moisture to form a high strength waterproof seal. It is multi-purpose silicone sealant which is flexible and has a powerful anti-fungicide property to prevent mould/bacteria growth.
Weather Sealant is a high-performance, neutral cure weather resistance silicone sealant. It has non-corrosive property, 50% Joint movement capability and low Tensile strength. It provides strong bonds to a variety of construction materials. Low string upon gunning, ease of application and ready to use.
