Necessary cover pad
SC9191 white PTFE/red Silicone septa, 9mm blue short screw-thread polypropylene cap, 6mm centre hole
SC9291 red PTFE/white Silicone septa, 9mm blue short screw-thread polypropylene cap, 6mm centre hole
SC9391 red PTFE/white Silicone/red PTFE septa, 9mm blue short screw-thread polypropylene cap, 6mm centre hole
SC91191 pre-slit white PTFE/red Silicone septa, 9mm blue short screw-thread polypropylene cap, 6mm centre hole
SC92291 pre-slit red PTFE/white Silicone septa, 9mm blue short screw-thread polypropylene cap, 6mm centre hole
SC94491 pre-slit blue PTFE/white Silicone septa, 9mm blue short screw-thread polypropylene cap, 6mm centre hole
The best services:
To supply continuously high quality products
To offer optimal economy
To grant consequent deadlines
To develop innovative and market-orientated
To support promptly and efficiently our customers in all respects they may require
Strenghts for platinum cure molding rubber silicone rtv
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.
Why platinum cure molding rubber silicone rtv
Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance.
It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It is available for making moulds that are poured, brushed or sprayed
Features of platinum cure molding rubber silicone rtv
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistance
8. Food grade, non-toxic
Datasheet of platinum cure molding rubber silicone rtv
Black color pcb electronic potting silicone hy-215
Technical parameters for pcb electronic potting silicone
Properties indexPart aPart b
Before curingAppearenceBlack fluidColorless / yellowish fluid
Viscosisty (cps)2500±500-
Features when operationMixing ratio ( by weight)10:1
Operating time (25c /min)20~30
Curing time ( hr, basically cured)3
Curing time ( hr, perfectly cured)24
Hardness(shore a)15+/-3
After curingThermal conductivity[w( m·k)]=0.4
Dielectric strength( kv/mm)=25
Dielectric permittivity(1.2mhz)3.0~3.3
Volume resistivity(o·cm)=1.0×1016
Fire resistance94-v1
(pls note all data of pcb electronic potting silicone rubber with black color above is in 25c with 55% humidity conditions. We don't guarantee a same date if testing under different conditions, or when data was regenerated).
Warm tips for for pcb electronic potting silicone
1. Sealing pakage for storage. The mixture should be used up at once to avoid wasting.
2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.
3. When it gets stratified after a period of storage, please mix hy-210# evenly before using,
it does not affect the performance.
Shelf life and transportation
1. Twelve(12) months when stored at 25c in original unopened packages.
2. This is a non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
1. Application of liquid silicon rubber for toe spreaders:
The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole.Q
This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care.
2. Aadvantages of liquid silicon rubber for toe spreaders:
1. High transparency.
2. High fluidity, high curing rate.
3. Pressure release.
4. Shock absorption.
5. Multiple density
3. Datasheet of liquid silicon rubber for toe spreaders:
4. Package and storage of liquid silicon for Toe Spreaders:
1). 20kg or 200kg /drum.
2). It is a kind of non-dangerous goods, and it should be stored at a cool and dry place, please keep it from sun and rain.
Place of Origin: Guangdong China
Brand Name: Hong Ye silicone rubber
Minimum Order Quantity: 200 Kilogram
Delivery Time: within 3 days after payment confirmed in our bank.
Supply Ability: 8 Tons per Day
Payment Terms: L/C, T/T, Western Union
Price Terms: FOB, EXW, CIF, CNF
Packaging Detail: 1kg/Jar,5kgs/Jar,20kg/drum,25kgs/drum,200kgs/drum
Further information for silicon Toe Spreaders, please feel free to contact Miss COCO:
Website: http://www.szrl.net
Tel: +86 -0755-89948294
FAX: +86-0755-89948030
We supply personalised printed swim caps for clubs and events of all sizes all over the world at affordable prices.
We can print any design on the side of quality swim caps. We have a range of different types of swim hats suitable for printing, including silicone caps. Simply supply the artwork and we get them printed for you.
4864 Non Metallic Elements Suppliers
Short on time? Let Non Metallic Elements sellers contact you.
Custome fda silicone cover silicone bottle sleeve wrap hold for thermos flask glass bottle kitchen utensil
Silicone bottle sleeve with sling, stopper, seal, cover
Material :100% food grade silicone
Color : any color is available (as customer request)
Design : customer design, oem welcome
Logo : customized (silkscreen logo, embossed or debossed logo)
.
Moq1000 pcs
Trial order : acceptable, can made free sample mould
Samples :available for evaluation before place order
Certification:sgs, rohs, fda,
Payment: t/t, paypal, western union
Place of origin: xiamen, fujian, china (mainland)
Function1) 100% food grade silicone material, no abnormal odour or staining.
2) nonstick, durable, temperature resist (-40°c to 260°c), safe for dishware, microware, oven, freezer, easy to clean and remove.
3) eco-friendly, flexible, lightweight and portable, easy to store and transport.
4) any colors, sizes, hardness & styles with silkscreen logo, embossed or debossed logo are available.
5). Customers' designs/samples are welcomed.
6). Reasonable direct factory price, high quality & fast delivery.
Features
Superior clarity.
Easy to use – one part, no mixing required. Can be dispensed with an ordinary caulking gun.
Cures to a strong, flexible seal capable of withstanding movement in and around the joint.
Acetic cure; fast cure.
Can be applied in any season.
Excellent resistance to weathering, uv light, vibration, moisture, ozone, temperature extremes, airborne pollutants, cleaning detergents and many solvents.
Non-slumping; can be used in vertical and overhead joints.
Choice of colors: clear, white, gray, etc
General purpose, acetic cure silicone sealant with long term durability
Products information
Silicone oil ln-201
Description
Other name:polydimethylsiloxane fluid
Mf:(ch3)3sio[(ch3)2sio]n-si(ch3)3
Cas no:63148-62-9
Ln-201 is a series of products with viscosity of 100~300, 000cst.Under strict production process, the quality of the ln-201 is able to reach the stand of food, cosmetics and pharmaceutical usage.
It is tested which established that silicone oil is essentially non-toxic and non-irritating. Not harmful to textiles, garments and human body.
Application
1.Used in skin care, bath gel, shampoo and other cosmetics.
2.Used in additives and agent in rubber, sealant, plastic, latex, etc.
3.Used as deforming agent, lubricant, release agent in pharmaceutical, food, chemical, paint and other industries.
4.Used as mold release agent
5.Used as softener, lubricants for sewing line, and other textile.
Storage:
Keep away from fire and direct sunlight, it has 12 months shelf life in closed containers, products beyond the shelf life can be usable.
Feature
?neutral, one-component, room temperature curing silicone sealants used in construction, non-corrosive to most building materials
Outstanding uv and weathering resistance
Good working time
Suitable for most of construction materials
Main purpose:
1 all kinds of doors and windows, glazing seal;
2 kinds of building materials, aluminum, steel, stone, tile and other adhesive seal;
3 indoor decorative glass adhesive seal.
Construction summary:
1 you must use a solvent such as toluene or acetone, the interface must be clean and keep clean;
2 in the need to protect the site affix tape, but do not touch the tape will be the construction of the
Surface;
3 before sealant cured, timely trimming, in order to achieve a beautiful look.
Application restrictions:
1 can not be used as a structural adhesive.
2 long-buried interfaces and long-term immersion occasions unfit for use.
3 greasy materials unfit for use.
4 after the sealant has not cured prior to construction, not completely closed isolated from the air.
Hello,
We are direct exporter and seller of silicone rubber scraps , coming from mobile keypads, silicone sealant waste, silicone rubber scraps coming from insulators, silicone rubber scraps from pipe grade etc.
Mould Release Agent (SS EM -) is Silicone fluid emulsions which are inert, heat stable, non-toxic products, covers many industrial applications where lubrication, gloss, antistatic, protective and Release properties are advantageous.
Antifoam – Defoamer (SS AF -) is Antifoam Emulsion designed to provide optimum antifoam performance for general purpose and special pH conditions, combined with good dilution stability and good foam knock down performance.
Methyl Hydrogen Emulsion (SS ER -) is reactive methyl hydrogen emulsion especially designed for treating variety of substrates & fibers where water repellent or hydrophobic properties required.
Textile Softners ( SS SOF -) Amino Silicone Fluids Emulsions specially designed to provide excellent elastic properties, bounce, excellent softness, silky finish to variety of fabrics with durability and unique handle.
Shine – Polish Agent ( SS SP -) is specially designed Shine and Polish emulsions formulations which provides high Gloss and good adhesion to variety of surfaces .The active agent contained supports an easy polishing of the conditioner formulations and improves the brightness.
Poly Urethane release Agent (SS-PU) Release Agent has been specially formulated as a semi permanent release agent in a wide range of applications, including:• Polyurethane Release: particularly polyester type, polyurethane shoe sole, Microcellular automotive parts and furniture (integral skin), Automotive parts: bumpers, crash pads, dashboards.
Liquid Silicone Rubber (LSR) is silicone rubber made from a liquid compound. This liquid compound mainly consists of silicone polymer and fumed silica, which are well known for being non-toxic and temperature resistant.
The molding process can be injection, pouring, brushing, dip-coating, etc.
Main applications include:
Baby products: Baby nipple, especially for those requiring high biting force; breast pump, etc.
Medical products: Laryngeal mask, catheter and negative pressure drainage ball.
Kitchen products: bake ware, silicone scoop, etc.
Industry product:: Key button, sealing rings and small parts.
Electric product: cable joint, insulator, etc.
Silicone over-molding product: Plastic stick with silicone rubber, with or without primer.
Calcium silicon alloy is the compound alloy.It is an ideal compound deoxidizer and desulfurizer which can be widely used in the production os steelssuch as high-quality steel,low-carbon steel,stainless steel and special alloys such as nickle base alloy,titanium base alloy.CaSi alloy can also be applied as the heat-raiser for converter steelmaking,the inoculant for for cast iron production and addictive for nodular cast iron production.
1. Product granules: 0-3mm 90%, 10-80mm 90%, 0-220 mesh or customized
2. Packaging: 1MT big bag
3. Samples: can be sent for free
4. MOQ: 5MT
5. Application: steel making, iron casting
6. Advantages:
Low impurities with high performance
Stable reaction and easy operation
Customized specifications are accepted
7. Factory history:
More than 13-year experience
Welcome to visit our factory
8.Certifications: ISO 9001:2008, SGS, CIQ & COA
ARG 100 is a hydrolytically stable Silicone polyether surfactant, which can be used in wide range of applications in Paints, Agriculture, PU Foams, Textile, Petroleum Refineries, Detergents, Automotive and Household cleaning products, due to its excellent surface property (surface tension below 22 dynes/cm).
SS ARG 166 is used as emulsifier in Textiles and other applications.
SS ARG 110 is a Super Wetting and Spreading Agent, which have a low molecular weight nonionic silicone surfactant, developed to improve the wetting, spreading and penetration of agricultural chemicals. It may be used as a formulation ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals
SS ARG 210 All purpose cost effective Spray Adjuvant , which on mixing with insecticides, fungicides, herbicides and other agriculture chemicals increases their penetration, spread and efficiency.
Potassium methyl siliconate (Aquarest WR 100) is an aqueous solution of Potassium methyl Siliconate, Water dilutable. It provides water repellent properties by reaction with atmospheric carbon dioxide.
Silane Siloxane Base coat (Aquarest WR 1000) It is suitable for coating painted surfaces too, as this does not impart any color change to the substrate. Forms an excellent weather coat for all types of cement and stone surfaces.
Reactive Silicone based (Aquarest 1200) is a solvent soluble fast curing reactive silicone, used for imparting a colorless water repellent surface finish for variety of industries.
Reactive Silicone emulsion (Aquarest 1300) is reactive Fluid emulsion water soluble especially designed for treating substrates to impart and improve water repellent properties.
Silane based water soluble (Aquarest WR 1100) is a solvent less, water- soluble, Silane Siloxane Emulsion. Dilute solutions of SS WR 1100 serve as general-purpose water repellents for impregnating and priming mineral surfaces.
Rust remover and Protective lubricant (SS WRC) is a speciality silicone lubricant for rust loosener and remover, water repellent for metal and also used for protection from corrosion.
SS AF is General purpose Antifoam – Defoamer Emulsion to provide effective antifoaming and defoaming solutions in aqueous systems for variety of industrial applications.
SS AF 5730 & 5520 is an excellent Antifoam Emulsion specially designed to control form in high temperature (over boil) and broad pH range ( 4-10) in aqueous systems.
SS AF 700 Powdered Antifoam been developed to control the foam generated during process or using Powder Insecticides, Pesticides, Detergents and Fertilizers.
A long chain silicone gum with controlled vinyl level is combined with fumed, precipitated silica as reinforcing filler along with various other materials and additives to create special properties.
Once you cure the compounds at high temperature (100~200 ºC) after mixing with catalysts it becomes HTV silicone rubber.
The molding process can be compression, extrusion, etc.
Main applications:
Baby products: Baby nipple, baby bib, etc.
Medical products: catheter and negative pressure drainage ball.
Kitchen products: bake ware, silicone scoop, etc.
Industry product:: Key button, sealing rings and small parts.
Electric product: cable accessories, insulator, etc.
Sports product: swim cap, goggle, etc.
SS ARG 110 is use as an Adjuvant refers to the use of this product as an additive to a pesticide for the purpose of enhancing the pesticide’s effectiveness for wetting more of the leaf surface (delivering the pesticide to a greater surface area for increased leaf penetration) and thereby providing rain fastness. i.e., herbicides are not washed off by rainfall because they have penetrated into the plant surface.
Enhances the performance of agricultural chemicals, especially water-soluble broadleaf herbicides, insecticides, fungicides and plant growth regulators
1. 1:1 addition type, good adhesive strength and self-healing
2. High elongation, excellent flexibility for mechanical stress relieving
3. Low oil penetration after cured, good anti-poisoning property
4. Good dielectric in high temperature for high voltage protection
5. Excellent aging resistance and weatherability
6. Excellent waterproof, corrosion prevention, moisture proof and chemical media resistance
Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector.
PROPERTY STANDARD/UNITS VALUE of SI2709
---- ---- PART A PART B
Material ---- Polysiloxane Hydrogen polysiloxane
Color Visual inspection Colorless Liquid Colorless Liquid
Viscosity 7;C, cps 800~1000 800~1000
Density 7;C, g/cm3 0.99 0.99
Mixture/mass ratio ---- A:B=100:100
Viscosity of mixture 7;C, cps 800~1000
Operation time 7;C, min 60
Cure condition RTV or HEAT 7;C /6 hour;67;C /30min
Cured appearance ---- Colorless transparent gel
Needle penetration 1/mm 75
Dielectric strength KV/mm 25
Volume resistance DC500V, ohm-cm 1.0¨¢1015
Loss factor 1 MHz88;0.001
Dielectric constant 1 MHz 2.8
Application temperature7;C -60~260
1.Solvent free two component material
2.Transparent both before and after cured
3.Platinum catalyzed curing system
4.No by-products after curing
5.Low viscosity before cured, easy to application
6.Excellent flexibility, free from stress
7.Extremely low oil exudation, good anti-poisoning
8.By adjusting the mix rate of part A and part B, can adjust the gel adhesion
9.It can stick repeatable
10.It can use with polyethylene release liner
11.Pass test of physiological compatibility, poison cell, skin stimulus etc.
PROPERTY STANDARD/UNITS VALUE of SI2721
---- ---- PART A PART B
Material ---- Polysiloxane Hydrogen polysiloxane
Color Visual inspection Transparent Liquid Transparent Liquid
Viscosity 7;C, cps 61;¨¤150161;¨¤150
Density 7;C, g/cm3 0.99 0.99
Mixture/mass ratio ---- A:B=100: (80~120)
Viscosity of mixture 7;C, cps 800¨¤150
Operation time 7;C, min ¡ê¾60
Cure condition RTV or HEAT 7;C /6 hour; 67;C /5min
Cured appearance ---- Transparent gel
Application temperature §C -60~200
Part Aa20 KG/Bucket, Part Ba20 KG/ Bucket; Part Aa200 KG/Drum, Part Ba20 KG/ Drum.
Part A is also available in 200 kg metal drums accompanied by the corresponding 200 kg of Part B.
4864 Non Metallic Elements Suppliers
Short on time? Let Non Metallic Elements sellers contact you.
