Model:S273 Name:GSM 3G M2M RTU (8DI+6AI+4DO+1TH+1USB+1RS232/485+64Registers) The GSM 3G M2M RTU is a multi I/O port remote terminal unit, through the RS232/485 port can connect intelligent meters or PLC. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications. Mainly Features: 1. ARM® Cortex™-M4 32 Bit RISC Core, 168 MHz inside, RTOS system; 2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery; 3. 4G SD card for save historical data, USB port for configuration and upgrade firmware; 4. 6 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA; 5. 4 Relay outputs, 5A/30VDC,5A/250VAC; 6. 8 digital inputs, dry contact or level input. One of the input can be used as counter; 7. 1 temperature probe input, 1 humidity transducer input; 8. I/O ports with opto-isolated, RS232/485 with 15KV ESD protection; 9. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network; 10. RS232/RS485 can performs Modbus RTU Master, Modbus RTU Slave, supports 01,02,03,04,05 code, up to 64 registers, the register arise alarm also can send SMS to alert; 11. RS232/485 can be used as data transparent transmission for different intelligent meters or PLC; 12. Automatically resend the data while communication failure, GPRS failure will alert by SMS text; 13. Supports remotely restart the RTU, and configure it by SMS commands remotely; 14. Supports over voltage protection and phase-reversal protection; 15. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message. 16. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.
Features Support USB3.0 Support 20MHz/40MHz/80MHz frequency 5G compatible with IEEE 802.11ac and IEEE 802.11a standard 2.4G compatible with IEEE 802.11n, IEEE 802.11g, IEEE 802.11g standard Detect the network and change transmit speed automatically Support WPA/WPA2/WPA-WPA2/802.1x and 64/128 bit WEP encryption Support WPS 2.0 Internal Omni-directional Antenna Support 2.4G and 5G dual band Support Wi-Fi Direct Support Multiple BSSID Support QoS-WMM, WMM-PS Support WPS: PIN, PBC Support Infrastructure mode, Ad-Hoc mode and Soft AP three modes Support Cisco CCX Low consumption management Supported OS: Window XP/Vista/Win7/Win8/Win8.1/Mac OS 10.10/Linux v3.0.0.1
Features Support USB3.0 Support 20MHz/40MHz/80MHz frequency 5G compatible with IEEE 802.11ac and IEEE 802.11a standard 2.4G compatible with IEEE 802.11n, IEEE 802.11g, IEEE 802.11g standard Detect the network and change transmit speed automatically Support WPA/WPA2/WPA-WPA2/802.1x and 64/128 bit WEP encryption Support WPS 2.0 Internal Omni-directional Antenna Support 2.4G and 5G dual band Support Wi-Fi Direct Support Multiple BSSID Support QoS-WMM, WMM-PS Support WPS: PIN, PBC Support Infrastructure mode, Ad-Hoc mode and Soft AP three modes Support Cisco CCX Low consumption management Supported OS: Window XP/Vista/Win7/Win8/Win8.1/Mac OS 10.10/Linux v3.0.0.1
T-Bridge stands for "Telephone Line Communication", Which enables high speed data transmission through telephone cables. Besides Telephone cables, any types of copper cables such as coaxial cables, speaker cables, and UTP cables can be applied. T-bridge can save network construction cost dramatically as it can utilize existing copper cables already wired.
Network equipment
Jaton Technology Limited is a professional engaged in mobile broadband communications equipment research and manufacturing of high-tech companies.Currently such terminal products as TD-LTE data module, FDD data module,WiMAX data module,indoor CPE, outdoor CPE , LTE base station and MIFI have already come into market.We are now providing not only general but also customized products and solutions for our customers. 1kg/pcs
JN6610 LTE Indoor CPE(Band31) Support VOIP function to meet the needs of overseas operators Support TR-069 and OMA-DM network management protocols Support VPN protocols including PPTP, L2tp and Ipsec Can be adapted to LTE modules in different frequency bands support standard mini-PCIe modules from partners Support internal or external antenna Simple, elegant and suitable for multiple locations Support PoE power supply to ODU, ODU+IDU total solution has the cost advantage 1kg/pcs
JN6100 is a powerful indoor CPE, with built-in Mini-PCIe interface inside. Support LTE modules both TDD and FDD, or multi-mode wireless access with various of modules. Support VOIP function to meet the needs of overseas operators Support TR-069 and OMA-DM network management protocols Support VPN protocols including PPTP, L2tp and Ipsec Can be adapted to LTE modules in different frequency bands support standard mini-PCIe modules from partners Support internal or external antenna Simple, elegant and suitable for multiple locations Support PoE power supply to ODU, ODU+IDU total solution has the cost advantage 1kg/pcs
JW0100 Product Feature Single-chip solution with low cost advantage Total industrial level devices Support TR-069 and OMA-DM network management protocols Support VPN protocols including PPTP, L2tp and Ipsec Can be adapted to LTE modules in different frequency bands; support Wimax/LTE dual-mode; support standard mini-PCIe modules from partners Built-in high gain dual-polarized directional antenna with the gain up to 10dBi or more, Support long-distance transmission between the base station POE power supply and easy to install Adapt to harsh outdoor environments, extreme high and low temperature, high UV radiation, Lifetime is more than 10 years IP65 class protection 1KG/PCS
EMS solution monitors the status of server by using TCP/IP, SNMP, and ICMP protocols and by installing three applications (EMS agent, EMS server, and EMS monitoring) as well as sends an alarm by means of mail, SMS, and monitoring message according to user definitions in order to respond to server errors in a prompt manner. The solution aims at integrated management of various call center systems and network devices. These results re-gather their feedback on the target value is more accurate and valid gapeurosseo is utilized.
Module: Mobileeco ME-C21G (MDM9215/WTR1605L/PM8018) External Access: LTE/DC-HSPA+/HSUPA/HSDPA/WCDMA Air standard: LTE Release9, WCDMA Rel'99+/HSDPA Rel 5 Max output power: LTE: 23dBm 2.7dB RF technology: zero intermediate frequency Power: 5VDC +/- 10% Bettery: Li-ion 3.7V 2800mAh
Chipset: Qualcomm MDM9615 Max output power: LTE: 24dBm 3.84dB, CDMA: > +23dBm 3G/4G Standard: FDD LTE Release9, WCDMA Rel'99+ Band: B12 700MHz, GSM 850/1900 Power: AC Adapter 5.0VDC Max Current Consumption: Under 700mA@LTE 22dBm cat4 10MHz BW
Module: Mobileeco ME-C21G (MDM9215/WTR1605L/PM8018) External Access: LTE/DC-HSPA+/HSUPA/HSDPA/WCDMA Air standard: LTE Release9, WCDMA Rel'99+/HSDPA Rel 5 Max output power: LTE: 23dBm 2.7dB RF technology: zero intermediate frequency Power: 5VDC +/- 10% Bettery: Li-ion 3.7V 2800mAh
Chipset: Qualcomm MDM9615 Max output power: WCDMA: 24dBm 3.84dB CDMA: > +23dBm 3G/4G Standard: FDD LTE Release9, WCDMA Rel'99+ Band: B12 700MHz, GSM 850/1900 Power: AC Adapter 5.0VDC Max Current Consumption: Under 700mA@LTE 22dBm cat4 10MHz BW
Mtoken k5-b, also called mtoken bluetooth, is a smart card based wireless device which is independent from pc connections. K5-b is designed especially for wireless terminal such as mobile¡¢pc¡¢embedded platform to ensure secure network authentication and communication encryption. It supports both usb and wireless communication type. Meanwhile, mtoken k5-b fits cross platform standard interfaces of international standard, so it can support windows, linux, android, ios and mobile terminal pki application such as email encryption¡¢digital signature¡¢security certificate¡¢vpn¡¢ssl .Etc. As k5-b supports bluetooth interface, so it needs no wires and supports short distance wireless communication. Compared with the traditional usb device, k5-b supports usb and bluetooth communication, suitable for pc application and mobile wireless application, platform unlimited .Etc. If you are searching for this kind product, please take k5-b as the needed solution, it may match your requirement. 56mm*17mm*8mm
Smart x1 is a high-performance smart-card based software protection dongle with on-board 3des algorithm. This high-strength device is easy to integrate and help developers make comprehensive protection strategy. It has built-in 20kb data storage area, which is composed of mass storage area and 64 controllable data page area. Additionally, each page contains five useful properties: enable read only, access code, 3des key and max access number. 55mm*16.6mm*7mm
Mtoken k3 is an auto-run device, with its competitive high performance in key pair generation, encryption/decryption, signature/verification. It is used as a high security level usb key carrier of digital certificates and private key. With built-in 32bit smart card chip, it provides identity authentication and data encryption service with the realized functions, such as e-mail encryption, digital signature, identity authentication, secure key management and transmission dispatcher .Etc. Meanwhile, k3 adopts asymmetric key technology which is widely used in pki system and can satisfy the high-end requirements in digital certificate and electronic seal. Mtoken k3 is the best choice in internet information security. Additionally, we make a test between longmai¡¯s pki products: k3, is the highest performing pki product of longmai. K3 can generate exchange keypair in 1684ms while signature in 1819ms, encrypt 2k data with rsa in 1.75k/s while decrypt in 3.09k/s. About the detail information, please refer to document and contact us. 56mm*17mm*8mm
Standard: ieee802.11n current draft, eee 802.11g, eee 802.11b, eee 802.3, eee 802.3u, eee 802.3x Protocol: csma, ca, csma, cd, tcp, ip, cmp, nat, pppoe, dhcp , pptp, udp, nat, dns, ddns, vpn Portlan: 4*10, 100basetx (auto mdi, mdix) Port wan: 1*100base optical (single fiber sc connector) Cable: multi-mode fiber: 50, 125, 62.5, 125um(the max distance up to 2km or 5km) Single-mode fiber: 8, 125, 8.7, 125, 9, 125, 10, 125um(the max distance up to 20-120km) Wireless parameter rf frequency : 2.4~2.4835ghz Data rate : 11n: 300, 270, 243, 216, 162, 108, 81, 54, 27mbps 135, 121.5, 108, 81, 54, 40.5, 27, 13.5mbps 130, 117, 104, 78, 52, 39, 26, 13mbps Channels : 1-11 (north america);1-13 (general europe);1-14 (japan) Wlan modulation scheme : bpsk, qpsk, cck and ofdm (bpsk, qpsk, 16-qam, 64-qam) Antenna type : 1*2.4ghz dipole antenna; ¡ê¡§1tx*1rx¡ê© Wireless operation mode : standard access point; wireless wan mode (client mode wireless), wds ¡ê¬wps Wireless security : wep 64, 128bit;mac based association; ssid broadcast disable;wi-fi protection access (tbd), wpa, wpa2 Led: 1*power, 1*cpu status, 1*wireless, 1*wan¡ê¡§optical¡ê©, 4*lan
Product overview Ts2824fl ethernet switch which has the fun -ction of lcd and poe . It contains 26 rj45 ports and 1~24 support poe functions , the poe ports can automatically detect and supply power to ieee802.3af/at compliant powered devices (pd). The electrical power and data transmission on the same cable can expand your network to the places where no power lines or outlets, where you can install devices such as aps, ip cameras, or ip phones etc. The lcd not only can display the poe work status, accurate judgment port of load, can also help customer and engineer timely discover and solve the network failure, improve work efficiency and quality. Features Interface information 24 10/100mbps rj45 ports 2 10/100/1000mbps rj45/sfp combo ports 24 ports poe Poe(power over ethernet¡ê© Complies with ieee802.3af/at power over ethernet Supports poe power up to 32w for each poe port Auto detect power device Remote power and data feeding up to 100m Switch Flow control for full duplex operation and back pressure for half duplex operation 4k mac address, automatic address learning and address aging Support lcd display Built-in power supply can be chosen by the customer Poe features The ts2824fl can provide up to 32 watts of power to attached devices, such as voip phones, wireless access points; surveillance cameras etc, all over existing cat. 5cables. The switch eliminates the need for individual power sources for devices in the network, saving on costs for power cables and avoiding power outlet availability issues. Lcd features Ts2824fl is with the function of the lcd display and poe ethernet switch. The lcd can display the working condition of poe port not only, still can accurately show the state of each port, such as: output power, overload, short circuit, light load, low voltage, over voltage, high temperature, and so on...
This series ftth terminal box are used in the end termination Of residential buildings and villas , to fix and splice with pigtails; Can be installed on the wall; may adapt variety of optical Connection styles; optical fiber can be managed effectively Specification: Adtftb104c Dimension(mm) w*d*h 210*140*40 Cable diameter(mm)7~10 Cable ports 1 Max capacity of splice 4(single fiber)
