Glsun SFP28-25G-BX10D DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength TX1330nm/RX1270nm Max Cable Distance 10Km Connector Simplex LC Transmitter Type DFB BiDi Extinction Ratio 3.5dB Media SMF Power Consumption
GLsun SFP28-25G-LR single-mode transceiver is SFP28 transceiver module duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20 pins connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It has built-in clock data recovery (CDR). This module is designed for single-mode fiber and operates at a nominal wavelength of 1310nm. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength 1310nm Max Cable Distance 10km on 9/125um SMF Connector Duplex LC Transmitter Type DFB 1310nm Extinction Ratio 3.5dB Media SMF Power Consumption
GLsun SFP28-25G-SR 850 nm VCSEL 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over multi-mode fiber for link length of 100m. These transceiver designs are optimized for high performance and cost-effective to supply customers with the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength 850nm Max Cable Distance 70m on OM3 or 100m on OM4 Connector Duplex LC Transmitter Type 850nm VCSEL Extinction Ratio 2dB Media MMF Power Consumption
GLSUN's QSFP-40G-ER4-T02 is a Optical Transceiver designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. Compatible Cisco Form Factor QSFP+ Max Data Rate 44.6Gbps Wavelength 1310nm Max Cable Distance 40km Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 5.5dB Media SMF Power Consumption
GLsun 40Gb/s QSFP+ PSM 10km Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel. and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 10km using single-mode fiber. These modules are designed to operate over single-mode fiber systems using 1310 nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP+ PSM LR4 is one kind of parallel transceiver that provides increased port density and total system cost savings. Compatible Cisco Form Factor QSFP+ Max Data Rate 11.2Gbps Wavelength 1310nm Max Cable Distance 10km at Single Mode Fiber Connector Single MPO Transmitter Type DFB Laser Array Extinction Ratio 3.5dB Media SMF Power Consumption
Cisco QSFP-40G-LR4 Optical Transceiver are designed for use in 40 Gigabit Ethernet links over single mode fiber. They are compliant with the QSFP+ MSA, and IEEE 802.3ba 40GBASE- LR4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. Compatible Cisco Form Factor QSFP+ Max Data Rate 11.3Gbps data rate per wavelength Wavelength 1310nm Max Cable Distance 10km link length Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 3.5dB Media SMF Power Consumption
GLsun QSFP-40G-SR4 Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for 40-gigabit ethernet applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. One version is each lane can operate at 10.5 Gbps up to 100m using OM3 or 300m using OM4 multimode fiber, another version is each lane can operate at 10.5Gbps up to 300m using OM3 or 400m using OM4 multimode fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service. Compatible Cisco Form Factor QSFP+ Max Data Rate 10.5Gbps Wavelength 850nm Max Cable Distance 150m on OM4 MMF Connector MTP/MPO Transmitter Type VCSEL 850nm Extinction Ratio 4dB Media MMF Power Consumption < 1.5W Power Supply Voltage 3.3V Operating Case Temperature 0C to +70C (Commercial)
QSFP28-100G-CWDM4-T02 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four CWDM with 1271, 1291, 1311, and 1331 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.
GLsun QSFP28-100G-LR4 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four electric-absorption modulated lasers (DMLs) with 1296, 1300, 1305, and 1309 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface. Compatible Cisco Form Factor QSFP28 Max Data Rate 28Gbps data rate per wavelength Wavelength 1310nm Max Cable Distance 10km link length Connector Duplex LC Transmitter Type LAN WDM DML Extinction Ratio 4dB Media SMF Power Consumption
GLsun QSFP-100G-SR4 Optical Transceiver is an integrated transceiver module containing a micro-optic component and semiconductor material, and can implement optical-electrical conversion and electrical-optical conversion. The module is designed as a four-channel, pluggable, parallel, QSFP28 transceiver for 100Gbps fiber-communication. Each channel can operate at 25Gbps up to 70m on OM3 fiber. And the operating wavelength is 850nm. The optical interface uses an 12 fiber MTP(MPO) connector, and the electrical interface uses a 38 contact edge type connector. This product is compliant to 100GBASE-SR4 of IEEE802.3bm standard and SFF-8436 specification, and provides reliable long life, high performance, and consistent service.
Application Applicable for the FTTH project and provide mechanical protection for a fiber management system that includes the functions of splicing, patching, and passive component integration. â? Rated to IP55, suitable for indoor or outdoor application. Features Easy to install and connect. Available for standard SC, or LC-Duplex adapters. Available for 1x4 or 1x8 PLC splitter. The fiber bend radius in the box is more than 30mm. Open ports for easy cable installation. Perfect fiber management - Clear fiber function division and fiberting. Reliable cables fixed device (including outputs). Available for both Wall-mount and Pole-mount.
ZTE ZXDU68 S601 communication power supply system
ZTE Network Power ZXCTN6110
Eltek Network Power Control Module Smartpack S PANEL
BDPR4850 BDPR4850DR03 48V 50A 2900W
VPE4820/1080-1
Vapel Huawei PSU4850A is a digital rectifier that converts the 85VAC ~300VAC input to 53.5 VDC output that possesses the characters of high efficiency
Dpc Power Source Dumc-48/60 48v 60a Embedded Communication Power Supply
Huawei PSU4850A power supply control
HUAWEI Communication power supply ETP48120-B5A2.
