Find Verified Networking Internet Peripherals Suppliers, Manufacturers and Wholesalers

Sanitary Product - WC
water closet

wide range of products

Cat 6 Ethernet Adapter
This durable Cat 6 Crossover adapter converts any straight through Cat 6 Ethernet cable to an Ethernet crossover cable.Built with all four pairs crossed, the adapter provides full Gigabit throughput performance.

Contact us for more details

Guaranteed Fast shipping

100% Guaranteed After-Sales support

100% Guaranteed Genuine/Authentic Product

100% Guaranteed Factory warranty (International)

100% Safe express Door-to-Door Delivery

Factory Sealed Original Product Packaging

The 100G QSFP28 SR4 optical transceiver integrates the transmit and receive path onto one module. It converts parallel electrical input signals into parallel optical signals, by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The transmitter module accepts electrical input signals compatible with Common Mode Logic (CML) levels. All input data signals are differential and internally terminated. The receiver module converts parallel optical input signals via a photo detector array into parallel electrical output signals. The reCML) levels. All data signals are differential and support a data rates up to 27.9525Gb/s per channel.ceiver module outputs electrical signals are also voltage compatible with Common Mode LogicOn
This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.



Features:
MTP/MP0 optical connector
Single +3.3V power supply
Hot-pluggable QSFP28 MSA form factor
Up to 100m OM4 MMF Distance
4x28G Electrical Serial Interface (CEI-28G-VSR)
AC coupling of CML signals
Low power dissipation(Max:3.5W)
Built in digital diagnostic function
Operating case temperature range:0 to 70
Compliant with 100GBASE-SR4
I2C Communication Interface

Applications:
100GBASE-SR4
Infiniband QDR/DDR/SDR
100G Datacom connections

Standards:
Compliant with IEEE 802.3ba
Compliant with QSFP28 MSA hardware specifications
Compliant with RoHS

Motor series: low inertia, low power. Rated output power: 0.1kw. Rated speed: 3000r / min. with brake or not: attached.
Shaft end: keyway (slotted position).
Protection level: IP55, excluding the shaft threading part and the basic knowledge of connector hg-kr73j. Features: low inertia, suitable for high frequency operation.
Application examples: inserter, assembly machinery. Motor series: flat type, medium and small power. Rated output power: 0.75KW.
Rated speed: 2000r / minhg-kr73j with brake or not: No. Shaft end: Standard (straight shaft). Protection level: IP65 (IP67).
Features: the flat design makes it more suitable for installation in a narrow space. Application example: basic knowledge of robot and food manufacturing machinery hg-kr73j. High resolution encoder 131072p / rev (17 bits).
High resolution encoder is included to ensure excellent performance and stability at low noise.
All motors are the same size as the previous products and the wiring is compatible. Type: ha-fh series. Rated output: 0.2KW. Rated speed: 3000r / min. Electromagnetic braking: Yes.
The loss control technology of AC co serving motor itself has become increasingly perfect and popular.
From the perspective of real-time operating system, it is only a functional module that needs real-time response processing. The multi-function and intelligent requirements of the dry controller, a large number of signal processing, and the establishment and operation of various mathematical models to meet the needs of control,
Network communication and other functional modules will operate correctly and reliably under the unified scheduling and management of the real-time operating system. Therefore, the next generation of servo drive controller will be the basic knowledge of hg-kr73j. Rated output: 2.0kw
Rated speed: 3000r / min. electromagnetic braking: attached. Power supply: 200V.
Suitable for high frequency operation of medium capacity and low inertia products.
To improve the environmental resistance, hg-kr, hg-mr, hg-rr and hg-ur series products adopt ip65100 sites, and there are 100 different drive controls. In order to meet diversified and detailed on-site needs as much as possible,
In the configuration of mr-j4 product line, it provides rich servo amplifier and servo motor products. It can meet the different needs of different customers. Type: hc-pq. Output power: 0.2KW.

Driver: mr-h ACN series ssc-net compatible AC same service rated output: 0.2KW
The same server controller can easily convert the operation module and Fieldbus module through the automation interface
At the same time, different fieldbus modules are used to realize different control modes (RS232, RS485, optical fiber, INTERBUS and PROFIBUS), while the control mode of general frequency converter is compared with single-mr-pwcns5.
The servo controller is directly connected to the resolver or encoder to form a closed-loop mr-pwcns5 for speed and displacement control, while the general frequency converter can only form an open-loop control system mr-pwcns5
The control indexes of servo controller (such as steady-state accuracy and dynamic performance) are better than general frequency converter. Optical fiber length: 0.5m. Sscneti application cable (standard optical fiber used in the control cabinet).
Connector for cn1a and cn1b, Shenji general AC servo amplifier melcervo-j3 series mr-pwcns5, rated output: 5.0kw.
Interface type: sscnet optical fiber communication type. Power specification: three-phase AC400V.
By using sscnet III high-speed serial communication with the fastest communication cycle of 0.44ms between the motion controller and the servo amplifier, a fully synchronous control system can be constructed.
Just insert the special optical fiber into the connector to form the sscnet network, which greatly reduces the wiring work and the possibility of miswiring.
Due to the use of optical fiber communication, the anti noise ability is greatly improved, and the original mr-pwcns5 can realize long-distance wiring up to 800m (the maximum 50m x16 axis between stations)
Provide servo amplifier mr-j3-b-rj006 meeting the full closed-loop control function. It is suitable for the optimization and adjustment of the same clothes of dry machinery
More advanced optimization adjustment function and control function to maximize the mechanical performance. Electric general AC servo amplifier melcervo - J3 series.
Rated output: 7.0kw original mr-pwcns5 interface type: sscnet optical fiber communication type. Special specification: full closed loop control type. Power specification: three phase ac200v. High precision and high response positioning control.
The full closed-loop control with high response can be realized through double feedback control,
The dual feedback control can be performed when switching between the servo motor encoder and the load side encoder. Mr-j3-b-rj006 can be used with linear encoders from many manufacturers.
Users can build the original mr-pwcns5 system according to their own accuracy requirements. The ABS linear encoder with serial interface can easily build an absolute position detection system without installing a battery on the servo amplifier.

Compatible with RJ45 plugs according to ANSI / TIA-1096-A and IEC 60603.

Number of Ports: 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x8, 1x9, 2x1, 2x2, 2x3, 2x4, 2x5, 2x6, 2x8.

Industrial-grade: All products are of industrial standard. The extended temperature range is 40 85 for maximum performance.

Gold-plated: All the terminals of our products are gold-plated and can be customized in

Transmission Rate: 10 Base-T, 100 Base-T, 1000 Base-T / 2.5G, 5G, 10G / PoE, PoE+, PoE

Material: All products are in line with RoHS, REACH and other EU standards.

Structure: Vertical, Horizontal, Through Hole, SMT, Low Profile.

Combination of connectors: RJ45+USB, RJ45+HDMI.