1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2ã?? Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
Advantages: 1.Excellent Chemical Resistance: The PFA pipette tips exhibit remarkable chemical stability, resisting corrosion from harsh chemicals like acids, bases, and organic solvents. This ensures consistent performance and accuracy in demanding laboratory environments. 2.Wide Temperature Range: These pipette tips can withstand a broad temperature range from -200�°C to 260�°C, making them suitable for both low- and high-temperature applications. 3.High Precision and Accuracy: The PFA pipette tips offer precise and accurate dispensing of liquids, ensuring consistent and reliable results in laboratory experiments. 4.Low Background Values: With low metal element content (such as lead and uranium) of less than 0.01ppb, these pipette tips are suitable for high-sensitivity analytical techniques like ICP-MS and trace analysis. 5.Customizable Options: The pipette tips are available in different sizes and can be customized to fit various pipette models, meeting the specific needs of different laboratories. Durable and Reusable: The excellent stability of PFA material allows these pipette tips to be used repeatedly over a long period, reducing the need for frequent replacements and saving costs. 6.Easy to Clean: The smooth surface and precise manufacturing of these pipette tips ensure easy cleaning and minimal residue, maintaining the accuracy and reliability of the tips. 7.Transparent and Easy to Observe: The transparent design allows users to easily observe the liquid level inside the pipette tip, making it convenient for accurate dispensing. In summary, the PFA pipette tips from Nanjing Binzhenghong Instrument Co., Ltd. are an excellent choice for laboratories requiring high chemical resistance, precision, and accuracy in liquid handling applications.
NJbinglab PFA (Perfluoroalkoxy) material filter cartridges offer several significant advantages due to their unique properties. Advantages of PFA Filter Cartridges: 1. Chemical Resistance: PFA is highly resistant to a wide range of chemicals, including strong acids, bases, and solvents. This makes PFA cartridges ideal for applications in aggressive environments. 2. High Purity: PFA has low extractables and leachables, which helps maintain the purity of the filtered media. This is crucial in industries where contamination can compromise product quality. 3. Thermal Stability: PFA can withstand high temperatures without degrading, making it suitable for applications that involve elevated temperatures. 4. Non-Stick Surface: The non-stick characteristics of PFA minimize fouling and clogging, leading to longer service life and reduced maintenance requirements. 5. Versatility: PFA filter cartridges can be designed for various filtration processes, including microfiltration and ultrafiltration, making them adaptable for different operational needs. Application Industries: 1. Pharmaceuticals: In the pharmaceutical industry, maintaining product purity is essential. PFA filter cartridges are used for filtering solvents, active pharmaceutical ingredients (APIs), and other critical fluids. 2. Semiconductor Manufacturing: The semiconductor industry requires high-purity water and chemicals. PFA cartridges are commonly employed to filter ultrapure water and process chemicals, ensuring the integrity of electronic components. 3. Food and Beverage: In food processing, PFA filters help ensure that products meet safety and quality standards by filtering out contaminants from liquids. 4. Chemical Processing: PFA cartridges are widely used in chemical manufacturing for filtration of aggressive chemicals and solvents, ensuring safe and efficient production processes. 5. Environmental Applications: These filters can also be utilized in water treatment and environmental monitoring, helping to remove pollutants and ensure compliance with regulatory standards. Overall, PFA filter cartridges are invaluable in sectors where chemical resistance, high purity, and thermal stability are paramount, contributing to improved processes and product quality.
NJbinglab PFA (Perfluoroalkoxy) multi-stage filtration columns offer several advantages and are widely used in various industries. Advantages: 1. Chemical Resistance: PFA is highly resistant to a broad range of corrosive chemicals, making these filtration columns ideal for harsh environments. 2. High Purity: The non-contaminating nature of PFA ensures that the filtrate remains free from impurities, which is crucial in applications requiring high purity levels. 3. Temperature Stability: PFA can withstand high temperatures, allowing it to be used in processes that involve elevated temperatures without degradation. 4. Durability: These columns have a long service life due to their robust construction, reducing the need for frequent replacements and maintenance. 5. Versatile Design: Multi-stage configurations allow for customizable filtration processes, enabling the separation of different particle sizes and types efficiently. Applications: 1. Pharmaceutical Industry: Used in the purification of active pharmaceutical ingredients (APIs) and in sterile filtration processes. 2. Semiconductor Manufacturing: Essential for the filtration of ultrapure water and chemicals, ensuring the integrity of sensitive electronic components. 3. Chemical Processing: Employed for the filtration of aggressive chemicals in various reactions and product formulations. 4. Food and Beverage Industry: Utilized in processes requiring high hygiene standards, such as the filtration of beverages and food products. 5. Environmental Applications: Used in the treatment of wastewater and in processes for recovering valuable materials from waste streams. Overall, PFA multi-stage filtration columns are vital in industries that prioritize purity and chemical resistance, contributing to improved product quality and process efficiency. web: https://www.njbinglab.com Phone/Whatsapp/ Wechat :+8615805176994 Mail: rossnjbzh@gmail.com / rossg@njbinglab.com
Product Features 1. PFA material (translucent) 2. High and low temperature resistance: -200 C to 260 C 3. Strong acid and alkali resistance, high temperature resistance, wear resistance, antistatic 4. No dissolution and precipitation, no contamination of samples 5. Also known as impact bottle, impact filter, purge bottle, buffer bottle, gas washing bottle product specification 90 degrees horizontal and vertical: 30ml/60ml (slender); 2 vertical PTFE threads: 60ml (slender)/60ml (big mouth)/90ml (big mouth)/120ml/150ml/180ml; 2 vertical ports PFA welding: 60ml (slender)/60ml (big mouth)/90ml (big mouth)/120ml/150ml/180ml; customizable.
Product Usage: Wash away the impurities in the gas, and absorb the impure gas through the selected suitable liquid medium, so as to wash away the impurities and achieve the purpose of purifying the gas. Applicable industries: Isotope industry, heavy metal industry, semiconductor, new energy, new material, chemical pharmaceutical, nonferrous metal, precious metal... other products: PFA beaker, PFA reagent bottle, PFA drop bottle, PFA graduated cylinder, PFA scrubber bottle, PFA drop bottle, PFA microcolumn... FEP experimental utensils, PTFE experimental utensils, digestion apparatus, acid removal apparatus, acid purification system...
A scoop made of PFA (Perfluoroalkoxy) material offers several advantages due to the unique properties of this fluoropolymer. Advantages 1. High Temperature Resistance - PFA can withstand a wide temperature range from -200 to 260 degrees Celsius, making the scoop stable and durable under extreme heat without deformation or degradation. 2. Chemical Resistance - PFA exhibits exceptional resistance to almost all chemicals, including strong acids, bases, and organic solvents, ideal for corrosive environments. 3. Non-Stick Surface - The ultra-smooth and low surface energy of PFA prevents adhesion of liquids or solids, making it easy to clean and suitable for contamination-sensitive processes. 4. Weather Resistance - PFA resists UV radiation, oxidation, and hydrolysis, ensuring long-lasting performance without aging or deterioration. 5. Non-Toxic and Biocompatible - As a food-grade material, PFA is safe for contact with food and pharmaceuticals, releasing no harmful substances. 6. Mechanical Strength and Flexibility - PFA retains good mechanical properties over a wide temperature range, ensuring durability and resistance to breakage.
Advantages: 1.Material Selection: The inner vessels are crafted using modified polytetrafluoroethylene (TFM) and PFA materials, ensuring superior chemical resistance and durability. This choice of materials guarantees a low background value and enhanced performance. 2.Purity and Cleanliness: The vessels are manufactured in a clean environment, without the addition of any recycled materials, ensuring a high level of purity. This results in more accurate and reliable experimental data. 3.Compatibility: These vessels are designed to be fully compatible with various manufacturers' microwave digestion instruments, including CEM models, ensuring seamless integration and operation. 4.Temperature Resistance: The TFM material used in the vessels exhibits excellent resistance to high and low temperatures, ranging from -200�°C to +260�°C, with a maximum tolerance of up to 300�°C. This allows for safe and efficient operation under extreme conditions. 5.Deformation and Permeability Resistance: The TFM material offers improved resistance to deformation and permeation under high temperatures and pressures. This ensures the integrity of the vessel and prevents sample leakage or contamination. 6.Recovery and Durability: The vessels exhibit excellent recovery properties after exposure to high temperatures and pressures, ensuring their long-term durability and reliability. 7.Cost-Effectiveness: While offering comparable or superior performance to original equipment manufacturer vessels, the NJbinglab vessels are priced at a fraction of the cost, significantly reducing expenses for research and scientific institutions. 8.Specialized Production Process: The company employs specialized production processes that ensure a high level of smoothness and cleanliness of the vessel walls. This further enhances the accuracy and reproducibility of experimental results. 9.Customization Options: The company offers customization options, allowing customers to request vessels tailored to their specific needs and requirements. This flexibility ensures that the vessels meet the precise specifications of each application.
Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination. 2. Features: 1. The appearance is translucent, making it easy to observe the reagents in the tank; 2. High and low temperature resistance: -200 to 260 degrees Celsius 3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents; 4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb; 6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.; 8. Stable chemical properties, good recoverability, and not easy to deform; 9. Teflon plastic, durable and not fragile.
The 1.5ml conical bottom centrifuge tube made from PTFE (Polytetrafluoroethylene) offers several distinct advantages and applications, particularly in laboratory settings. Advantages: 1. Chemical Resistance: PTFE is known for its exceptional resistance to a wide range of chemicals, including acids, bases, organic solvents, and oils. This makes PTFE centrifuge tubes ideal for use with aggressive or corrosive substances that would degrade other materials. 2. Temperature Resistance: PTFE can withstand both very high and very low temperatures, typically ranging from -200 to +260 degrees Celsius. This allows the tubes to be used in a variety of temperature-sensitive applications, such as in cryogenic conditions or high-temperature processes. 3. Non-stick Surface: PTFE has a non-reactive and non-stick surface, which makes it easy to handle samples, minimizes sample contamination, and simplifies cleaning, as substances rarely adhere to the surface of the tube. 4. Durability and Strength: PTFE is a strong, durable material that resists cracking and breaking under normal laboratory conditions, ensuring long-term use and reliability. 5. Transparency: While not as clear as plastic alternatives, PTFE still offers reasonable visibility, allowing researchers to view the sample inside the tube when necessary. Applications: 1. Biotechnology and Molecular Biology 2. Pharmaceutical Industry 3. Environmental Testing 4. Forensic Analysis 5. Chemical Research
Advantages of PTFE 5L Round-Bottom Flask: 1. Exceptional Chemical Resistance: PTFE (Polytetrafluoroethylene) is renowned for its outstanding chemical resistance. It can withstand a wide range of corrosive acids, bases, solvents, and other reactive chemicals without degradation. This makes the PTFE 5L round-bottom flask ideal for use in highly corrosive environments where glass or other materials might fail. 2. High Temperature Stability: PTFE can operate at temperatures ranging from -200 to 250 degrees Celsius, providing excellent thermal stability. This makes the flask suitable for high-temperature processes, including refluxing or heating of chemicals, without the risk of melting, warping, or chemical breakdown. 3. Non-Stick Surface: The non-stick properties of PTFE ensure that chemical residues or by-products do not adhere to the flask's surface, making it easier to clean and maintain. This feature is particularly beneficial in applications requiring minimal contamination or cross-contamination. 4. Durability and Longevity: PTFE is highly durable, resistant to physical wear, and can withstand harsh working conditions for extended periods. This ensures a longer lifespan for the flask, reducing the need for frequent replacements and providing cost savings over time. 5. Excellent Electrical Insulation: PTFE has strong insulating properties, making it ideal for use in electrochemical or electrical processes, where non-conductivity is important. 6. Lightweight and Safe: Compared to glass, PTFE is much lighter, reducing the risk of breakage and making it easier to handle. This also enhances laboratory safety, especially in environments where breakage of traditional glassware can be hazardous. --- Applications of PTFE 5L Round-Bottom Flask: 1. Chemical Synthesis and Reactions 2. Refluxing and Distillation 3. Electrochemical Experiments 4. Pharmaceutical and Biotech Laboratories 5. Solvent Extraction and Purification 6. High-Temperature Reactions --- In summary, the PTFE 5L Round-Bottom Flask is a versatile and durable piece of lab equipment that provides excellent resistance to chemicals, heat, and wear. Its broad range of applications makes it an indispensable tool in fields such as chemistry, pharmaceuticals, electrochemistry, and solvent extraction.
Advantages of PTFE electrolysis test tank: 1. Chemical Resistance: PTFE (Polytetrafluoroethylene) is known for its exceptional chemical resistance. It can withstand aggressive acids, alkalis, and organic solvents without degradation. This makes PTFE electrolysis test tank highly suitable for processes involving corrosive chemicals, where traditional materials might corrode or degrade. 2. High Temperature Stability: PTFE maintains its structural integrity and performance in a wide range of temperatures, typically between -200�°C and 260�°C. This high thermal stability makes PTFE electrolysis test tank ideal for processes that involve high temperatures. 3. Non-stick Surface: PTFE has a naturally low surface energy, meaning that it has excellent anti-stick properties. This is beneficial in electrolytic processes where the buildup of by-products or contaminants on the cell surface can affect efficiency. 4. Electrical Insulation: PTFE is a good electrical insulator, which makes it ideal for use in electrolysis test tank, where electrical isolation and safety are critical. 5. Durability and Longevity: PTFE is highly durable and resistant to wear, ensuring long-term reliability and performance in demanding electrolytic processes. 6. Low Surface Friction: The low friction coefficient of PTFE reduces wear and tear on the components in the electrolytic cell, leading to lower maintenance requirements and increased efficiency over time. Applications in Various Industries: 1. Electroplating and Metal Refining 2. Chemical and Pharmaceutical Manufacturing 3. Water Treatment 4. Battery Manufacturing 5. Electrosynthesis and Electrodialysis 6. Semiconductor Manufacturing 7. Hydrogen Production
Product features 1. The chemical stability of PFA material can significantly reduce cross-contamination, the friction coefficient is very low among plastics, and it also has good electrical properties, and its electrical insulation is not affected by temperature; 2. It has good chemical resistance and can tolerate almost all chemical solvents; 3. Can be used as a pipeline connection control for various chromatographs, chemical equipment, etc.; 4. High and low temperature resistance: the operating temperature is -200~+260â??, and it can maintain its mechanical strength within a large temperature difference: from low to high temperature, PFA can maintain its flexibility without losing toughness. The same as PTFE, this is all carbon High sustained service temperatures of fluoropolymers; 5. Compared with similar products of polytetrafluoroethylene, it is highly transparent and convenient for experiments; 6. Easy to clean: PFA itself is non-stick and has the ability to waterproof, oil and other substances. The surface is flat and smooth without any scratches. It is easy to clean during use. PFA series products PFA sample dissolving tank, PFA reagent bottle, PFA vial, PFA measuring cup, PFA beaker, PFA washing bottle, PFA digestion tube, etc.
1.Material: Ultra high purity PTFE 2.Corrosion resistant, extremely low background 3.Temp range:-200-250 Celsius degree Advantages Wide Temperature Range: Operates flawlessly from -200�°C to +250�°C. Exceptional Corrosion Resistance: Withstands strong acids, alkalis, aqua regia, and organic solvents without dissolution, adsorption, or precipitation. Low Metal Element Blank Value: Minimal risk of pollution. Superior Insulation: Unaffected by environmental factors and frequency, featuring low dielectric loss and high breakdown voltage. Resistant to Atmospheric Aging and Radiation. Low Permeability: Ensures efficient protection and cleaning. Self-Lubricating: Boasts the smallest coefficient of friction among plastics, reducing friction-related issues. Non-Adhesive Surface: Solid material with low surface energy, preventing sticking. Soft Mechanical Properties: Offers flexibility and versatility.
Product Name: PFA Round Bottom Flasks Specifications (ml): 500ml Material: PFA Using temperature: -200-260 Common applications of PFA flasks include: 1. Chemical laboratories: PFA flasks are widely used as reaction vessels in chemical laboratories. Due to their corrosion resistance and high temperature resistance, they are suitable for various acid and alkali solutions, organic solvents and high temperature reactions. 2. Biotechnology: PFA flasks are also used in the field of biotechnology. It can be used to prepare and store biological samples, such as cell culture, bioreactors, etc. 3. Pharmaceutical manufacturing: PFA flasks are widely used in chemical reactions, drug mixing, solvent storage and other links in the pharmaceutical manufacturing process. It can withstand high temperatures and various drug solutions without contaminating the drugs. 4. Semiconductor industry: In the semiconductor industry, PFA flasks can be used to handle high-purity chemicals, solvents and acid and alkali solutions. It has very good chemical stability and can ensure product quality and a dust-free environment. 5. Food processing: PFA flasks can also be used in the field of food processing, such as the storage, mixing and distribution of acid, alkali and salt solutions. It meets the chemical stability and hygiene requirements of food.
PFA (Perfluoroalkoxy) welded fittings offer a range of advantages and are used across various industries. Here's a detailed description in English: Advantages of PFA Welded fittings: 1. High Chemical Resistance: PFA is highly resistant to a broad range of corrosive chemicals, acids, bases, and solvents. This makes it ideal for industries where materials are exposed to aggressive chemicals or extreme environments. 2. High Thermal Stability: PFA can withstand high temperatures (up to around 260°C or 500°F) without degrading, making it suitable for high-temperature applications. 3. Non-Stick Surface: PFA has excellent non-stick properties, making it resistant to fouling and scaling. This reduces maintenance needs and ensures long-term performance. 4. Electrical Insulation: PFA is a good electrical insulator, which is beneficial in industries that require conductive and non-conductive environments to be separated. 5. Excellent Durability: PFA fittings offer excellent mechanical strength and long service life, even in challenging operating conditions. 6. Flexibility in Installation: PFA fittings can be welded, providing a secure, leak-proof connection that is ideal for systems requiring reliability and high integrity. Applications of PFA Welded fittings: 1. Chemical Processing: 2. Pharmaceuticals: 3. Food and Beverage Industry: 4. Semiconductor Manufacturing: 5. Oil & Gas: 6. Water Treatment: In summary, PFA welded fittings are essential in industries that require high chemical resistance, temperature stability, and purity. Their durability and reliability make them a preferred choice for critical applications in chemical processing, pharmaceuticals, food, and beverage industries.
Product Features: 1. Transparent, with raised scales, chemical resistance and heat stability, resistant to various acids, alkalis, HF and organic solvents; suitable for storing chemicals and samples; 2. Can be autoclaved at 121 (2 bar), in accordance with DIN EN 285. The flange design is convenient for clamping and moving, and has the function of dissipating heat and increasing mechanical strength; there is a mouth on the edge for easy pouring of liquid; it uses high-purity raw materials, is easy to clean, and can be used with our company's electric heating plate and digester 3. High thermal stability, good transparency, and smooth surface; 4. It is often used as a reaction container for preparing dissolved substances and smaller amounts of substances at room temperature or under heating; 5. Low precipitation: low metal ion dissolution and precipitation, it is a vessel for storing standard substances, corrosive and pure reagents; 6. High and low temperature resistance: operating temperature -200 +260 ; no record Memory effect; 7. Anti-pollution: low blank value of metal elements; 8. Suitable for trace, ultra-trace analysis, isotope analysis and other laboratories, it is a clean experimental analysis vessel; 9. It meets the requirements of laboratories or testing institutions, medical testing, trace testing, etc. for experimental equipment, and is suitable for trace analysis and containing high-purity organic solvents (for example: high-purity water, HF, acetone and other organic solvents, etc.); III. PFA series products: Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, microcolumns, crucibles, valves, joints, delivery pipes and other products.
Photomask cleaning cassettes made from PTFE (Polytetrafluoroethylene) offer several advantages, particularly in the semiconductor and microelectronics industries. Here are the key benefits and application environments: Advantages 1. Chemical Resistance: PTFE is highly resistant to a wide range of chemicals, including acids, bases, and solvents, protecting photomasks from corrosion during the cleaning process. 2. Low Friction Coefficient: The smooth surface of PTFE minimizes friction, reducing the risk of scratches and damage when loading and unloading photomasks. 3. High Temperature Stability: PTFE can withstand elevated temperatures without deformation or degradation, making it suitable for high-temperature cleaning processes. 4. Electrical Insulation: PTFE has excellent insulating properties, which help prevent static electricity from affecting photomasks, reducing the risk of electrostatic discharge damage during cleaning. 5. Easy to Clean: The non-stick surface of PTFE prevents dirt and contaminants from adhering, facilitating easier cleaning and maintenance. Application Environments 1. Semiconductor Manufacturing: Used for cleaning photomasks to ensure high precision and quality in photolithography processes. 2. Microelectronics: Essential for maintaining the cleanliness of photomasks in the production of microelectronic components. 3. Laboratories and R&D: Employed in research and development and small-scale production to clean and store high-value photomasks. 4. Optical Device Manufacturing: Utilized for cleaning and maintaining various optical components, ensuring their performance is not compromised by contamination. Overall, PTFE photomask cleaning cassettes are widely used in environments that require high cleanliness and precision.
1. Product Introduction: PFA sample vials are widely used in geological and mining experiments. They are a versatile experimental tool, also known as dissolution cups, digestion bottles, sample containers and beakers. These tanks are suitable for low-pressure and medium-pressure dissolution, as well as digestion of experimental samples. When used with ICP-MS/ICP-OES analyzers, these tanks can improve the accuracy of trace analysis. In addition, these tanks are designed with different bottom shapes according to experimental requirements, such as U bottom, flat bottom and V bottom. If you need to use a hot plate or a digestion instrument with holes for experiments, you can get better results with PFA dissolution tanks. 2. Description: Specifications (ml): 3/5/6/7/15/22/30/40/60 Material: PFA Temperature tolerance: -200-260â?? Applicable to sample pretreatment experiments for analysis of dozens of elements in geological and mineral samples such as: Mo, Ba, V, Si, Se, Li, Ga, Fe, Mg, Zn, Hg, K, etc. 3. Characteristics: 1. Translucent appearance, smooth inner wall, no water hanging, easy to clean; 2. Temperature resistance: operating temperature -200ï½?+260â?? (do not exceed 150 degrees under closed conditions); 3. Threaded mouth, excellent sealing, no air leakage; 4. Anti-pollution: low blank value of metal elements; 5. With low dissolution and precipitation characteristics, it is a vessel for storing standard substances and different reagents; 6. The cover and body can be digitally numbered to avoid confusion; 7. The V-shaped bottom design is convenient for the collection of small amounts of samples; the U-shaped bottom design is suitable for the detection of geophysical and geochemical exploration samples. 4. Typical users: Isotope, mining, metallurgy, nuclear industry and other industries 5. PFA series products: Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, microcolumns, crucibles, valves, joints, delivery pipes, etc.web:
Product Features 1. Customizable with drawings provided; 2. Can be used as a connection control for various apparatus, chromatographs, chemical equipment, etc.; 3. Pure white appearance, high temperature resistance: operating temperature -200 to 250 degrees Celsius. Advantages of PTFE valves: Require no lubrication and provide a tight seal with minimal torque. Because they require no lubrication, ball valves also can be used in corrosive media and without the potential for contamination. Provide fast, shock-free opening and closing and fully seal under a wide range of pressures and temperatures. Offer a long, maintenance-free service life. Lightweight, and simple to install and operate. Can be used in a wide range of industrial applications, such as semiconductor, new material, new energy, fluorine chemicals, etc.
