Insulation joints (or isolation couplings or isolation joints) provide electrical isolation and cathodic protection in pipelines, tanks and pump stations where oil, gas and water are the carrier fluids. Insulation fittings are available in sizes ranging from 2 to 48 and pressures ranging from ANSI 150 to ANSI 900.
Three features ensure electrical isolation.
1. insulating gaskets prevent metal-to-metal contact at the joints
2. Internal cavities are filled with a special dielectric compound
3. Inner and outer surfaces are coated with two (2) coats of non-conductive epoxy paint, or according to customer specifications.
The welded end hubs of our insulated joints are supplied according to the customer's pipe specifications. Optional extra-long stubs (supplied by the customer) can be included in the completed joint.
Features of insulating joints:
1. Non-conductive material: The primary feature of an insulating joint is that it is made of a non-conductive material, which prevents the transfer of electrical current.
2. Easy to install: Insulating joints are typically easy to install, as they do not require any special tools or equipment.
3. Wide temperature range: Many insulating joints are designed to withstand a wide range of temperatures, making them suitable for use in a variety of applications.
4. Chemical resistance: Some insulating joints are made of materials that are resistant to chemical corrosion, which makes them suitable for use in chemical processing plants or other environments where chemicals are present.
The primary advantage of an insulating joint is that it provides electrical isolation between two sections of pipe, which can help to prevent electrical accidents and protect personnel.
Insulating joints are commonly used in a variety of applications, including:
1. Chemical processing plants: In chemical processing plants, insulating joints are used to prevent the transfer of electrical current between pipes, which can help to prevent explosions or other accidents.
2. Oil and gas pipelines: Insulating joints are used in oil and gas pipelines to prevent the transfer of electrical current between pipes, which can help to prevent fires or other accidents.
3. Power plants: Insulating joints are used in power plants to prevent the transfer of electrical current between pipes, which can help to prevent electrical accidents and protect personnel.
4. Water treatment plants: Insulating joints are used in water treatment plants to prevent the transfer of electrical current between pipes, which can help to prevent electrical accidents and protect personnel.
DESCRIPTION :
It is galvanized steel barbed wire with two strands of wire used for fencing.
APPLICATION :
Used in fencing
Type A: The wire has four points and is formed by twisting two points wire, each two turns, tightly around both line wires.
Specification :
IS:278
SIZE RANGE :
All Sizes
Material :
The galvanized barbed wire is manufactured from galvanized mild steel wire conforming to IS: 280
Galvanizing :
The barbed wire is galvanized and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanized coating on the round wire.
Packing:
The coils are normally supplied in the bare condition.
DESCRIPTION :
It is galvanised steel barbed wire with two strands of wire used for fencing.
APPLICATION :
Used in fencing
Type A : The wire have four points and formed by twesting two points wire, each two turns, tightly around both line wires.
Specification :
IS:278
SIZE RANGE :
All Sizes
Material :
The galvanised barbed wire is manufactured from galvaised mild steel wire confirming to IS : 280
Galvanizing :
The barbed wire is galvanised and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanised coating on round wire.
Packing:
The coils are normally supplied in bare condition.
117335 Metal Products Suppliers
Short on time? Let Metal Products sellers contact you.
DESCRIPTION :
These wires are supplied in coils with Phosphated coating to facilitate cold heading operation.
APPLICATION :
Used in manufacturing Balls, Rollers, Taper rollers, Cylindrical rollers and needles etc. made out from EN31 / SAE 52100.
SPECIFICATIONS :
Grade EN31 / SAE 52100 (Carbon 0.98 â?? 1.10 % and Chromium 1.30 â?? 1.60%). Microstructure: Uniformly distributed fine carbide globules in ferrite matrix i.e. Spherodized annealed.
All properties like Hardness, Tensile strength, Size tolerance, coil weight etc. are maintained as per customerâ??s specification.
PACKING :
The finished drawn wires are dipped in rust preventive oil, securely bound at four places and wrapped with Polethene & Hessian/ HDPE.
We specialize in supplying Bearing wires to customerâ??s actual needs.
Specification :
IS:EN 31/SAE 52100
SIZE RANGE :
Min. 1.60 MM,
Max. 9.50 MM
Wood Type: Mango & Iron
Size (Inch): 8 x 8 x 7
MOQ Piece: 250
FOB Price (USD): 8.4
Place Of Origin: India
Quality Certification: 100% Handmade superior quality with high standards of control.
Many different types specifications, Metal Dressuar, Seating in Several Colors with Tempered Glass, lac coated.
Request catalog and price list for more details
Many different types specifications, Metal Dressuars, Seatings in Several Colors with Tempered Glass, lac coated.
Request catalog and price list for more details
Many different types specifications, Metal Nesting Table Galaxy design, coffee table with Tempered Glass, lac coated.
Request catalog and price list for more details
We offer OEM sheet metal fabrication,electrical enclosure and CNC machines with high precision and quality
We constantly  pursue high quality metal product producing, and devote ourselves to provide fundamental components to worldwide clients and be part of a functional and specialist factory to the world.  If  any defective goods arrives you due to our responsibility, money will be refund or new parts will be offered in free.
Y81 series hydraulic scrap metal baler is used in steel foundry, recycling companies, ferrous & non-ferrous smelting industries.
It can press metal scrap into required shapes (cuboid, cylinder, octagon etc.) to reduce the storage space, transportation cost and moreover with the higher density, it will help the scrap melting in furnace to reduce the furnace consumption.
2. Features
a) Various models with different press force (60 to 2000 tons) to fullfil specific demands; custom design for your specific request.
b) Easy installation, all Y81 series need is a flat ground.
c) It can be electrical or diesel; it can be manual lever operation or full automatic operation, moreover it can be remote control.
d) Hardox wear plates give it a longer life to deal with different kinds of scrap.
