Pressure:High Material:steel Use:Medical Gas Product name:O2 gas cylinder Color:As the picture/Customized Standard:ISO9809-3 Outside diametor:219MM Water capacity:40L Height(without valve):1315mm Weight(without valve/cap):48Kg Service pressure:15mpa Design wall thickness:5.7mm
Technology brief There has been a growing demand for small and medium-sized oxygen equipment with rapid development of the national economy in recent years. Beijing Peking University Pioneer Technology Co., Ltd. (hereinafter referred to as PKU PIONEER), seizing this market opportunity with its advanced technology and engineering experience of more than 100 sets of oxygen equipment, has produced the customized the new skid-mounted PSA oxygen equipment through its continuous development and innovation. The PSA-O2 generator meets a wide range of requirements for users in need of small and medium-sized oxygen equipment. It has remarkable advantages on its stability, simplicity, efficiency and energy saving. Production Capacity 50Nm3/h-450Nm3/h, equivalent to liquid oxygen of about 1.7 TPD-15.4 TPD. Typical Applications The PSA-O2 generator is widely used in water treatment, flue gas ozone denitrification, kiln combustion, pulp bleaching, aquaculture, medical and other fields. Technical Advantages 1. Advanced single-vessel process Compared with the traditional double-vessel process, the world-leading single-vessel process requires less equipment but brings more stable performance with easier operation and maintenance. 2. High efficiency lithium-based molecular sieve The third generation of high-efficiency lithium-based oxygen generation molecular sieve (PU-8) has a lithium ion exchange rate of over 99%, bringing plenty of advantages such as high strength, high nitrogen and oxygen selectivity, large bulk density, uniform particles, long service life, etc. In combination with the proprietary automatic filling technology, the stability of the molecular sieve bed is effectively guaranteed. 3. Special valves for oxygen generation Special valves for oxygen generation are more suitable for VPSA oxygen process, offering good sealing, fast switching speed, stable performance and other characteristics, along with outstanding low failure rate and easy maintenance. 4. Modular integrated design Compared with the conventional double-vessel process, the equipment is more compact and the plot area can be reduced by more than 20%. 5. Low operation cost The power consumption of oxygen is as low as 0.29-0.32kWh/Nm3, the annual maintenance cost is 30% lower than that of a common PSA oxygen generator. The annual comprehensive operation cost is also reduced by more than 50%, compared with the cost of common PSA oxygen generator or purchasing liquid oxygen.
Technology Brief Based on the principle of VPSA technology, the VPSA-O2 units adopt the special adsorbent (model: PU-8) to enrich the oxygen in the air and supply it to the user. Production Capacity 1000Nm3/h~40000 Nm3/h, Converted to liquid oxygen: 34 TPD~1360 TPD Typical Applications > Steel: Blast furnace oxygen-rich coal injection, electric furnace steelmaking > Non-ferrous metallurgy: combustion-supporting for non-ferrous metals metallurgy including copper, lead, nickel, zinc, tin and gold. > Chemical: gasification furnace oxygen-rich gas making, carbon black production, sulphur trioxide production etc. > Kiln energy-saving: combustion supporting for glass kilns, cement kilns and oxygen-rich combustion supporting for waste incinerators > Papermaking: pulp bleaching process > Sewage treatment: OEAA technology, oxygen source for ozonizer Technical Advantages 1. Experienced engineering PKU PIONEER has built the most VPSA-O2 plants in China, including the world's largest VPSA-O2 plant. 2. Excellent energy consumption Energy consumption of PKU PIONEER's VPSA-O2 plant is 0.29-0.32kWh/m3 O2, which is among the lowest, around the world. 3. Internationally-leading process design PKU PIONEER has built up the first set of radial bed in China. Independently-developed five-bed, air intake and other original process designs have proved obvious advantages. 4. The independently-developed lithium-based adsorbent PKU PIONEER's independently-developed and produced lithium-based VPSA-O2 adsorbent PU-8 is featured by high selectivity and high working capacity of nitrogen, which is among the best around the world. 5. Mature and reliable system running The long-term engineering practice has proved that PKU PIONEER's VPSA-O2 plants are stable and the supplementary devices are mature and reliable, thus ensuring the continuous production for users.
Product: PSA oxygen generator with cylinder filling system Equipment: Air compressor / Air refrigeration unit / Air purification system / Fractionating column / Filling system Advantages: Cost-effective, Easy to install and maintain, Automatic and unattended operation, Produces oxygen from only raw material - ambient air
Weight : 29.5kg External dimension : 390mmX350mmX720mm Power : 750VA Average sound pressure level: 60dB Oxygen pressure : 30-60KPa Oxygen flow : 10L/min Oxygen concentration : 90%(V/V) -Select CECA top molecular sieve to stabilize oxygen production. -With ultra-long cumulative timing function, the total working time can be seen at a glance. With timing shutdown function, saving time and worry. - The compressor has a thermal protection switch to ensure the safety of the whole machine.
Oxygenator
MODEL NO. PEB-9012SB FLOW RATE : 12 LPM POWER : AC220V 50/60 Hz SIZE : 294 x 630 x 638 WEIGHT : 50 KG
MODEL NO. PEB-9012SB FLOW RATE : 12 LPM POWER : AC220V 50/60 Hz SIZE : 294 x 630 x 638 WEIGHT : 50 KG
Included: 1. Air oxygen blender 2. Humidifier with disposable chamber 3. Support arm 4. Adult disposable breathing circuit with a heated wire 5. Nasal cannula 6. Trolley 7. Medical air compressor 8. Tool kits Package: 1 unit/ 2 cartons 1st cartonï¼? 90.0 x 43.5 x 30.0cm / 0.1175CBM G.W.: 19.6kg 2nd carton 70.0 x 70.0 x 56.0cm / 0.2744CBM G.W.: 55.0kg
medical oxygen Oxygen connector 1.5M/1.8M/2M/5METC
Power Source AC 220V, 50-60Hz (Optional: AC 110V, 50-60Hz) Heated Plate 150W Thermal Cut Off 95±6oC Display Three digit, 0.56 inch, 7 segment Led Temperature Monitoring 0-75oC Max-temperature of Heated Plate 85oC Heated Wire AC 22V 60W, 50-60Hz Power Rate 220W Alarm Yes Temperature Control Setting Invasive Mode:Chamber outlet: 35.5-37oC, Airway: 35-40oC Non-invasive Mode:Chamber outlet: 31oC, Airway: 28-34oC Range 10-70oC, Accuracy: ±2oC (In 25-45oC temperature range)
OX-5A Delivery Rate (LPM) : 0.5~5 Maximum Fow (LPM) : 5 Output Pressure (KPa) : 58 ± 6 (8.5 ±0.5psi) Purity (%) : 93 �±3(0.5-5.0 L) Power Consumption ( W ) : 300 ( Aver.) Weight (Kg) : 14.6 Noise Level dB(A) : front 1 M < 42 Dimensions (mm) : 368 (L) x 342 (W) x 572 (H) OCI ( Optional ) Warranty : 3 Years
Warranty:- 1 year warranty capacity:- 5LPM
1 year warranty
Sodium percarbonate,
Manufacturer of Oxygen Absorber
Source manufacturer of medical oxygen generator. Our products have excellent quality and competitive prices. Products have CE, FDA, SGS certification reports and so on. US$200.00/set---US$1500.00/set Household oxygen concentrator, 5L=$150.00/set, 10L=$160.00/set, Medical oxygen concentrator, 5L=$590.00/set, 10L=$760.00/set, Minimum order quantity>=500 sets, Please contact me for product details, the price discount will make you satisfied. Whatsapp: +86 13086670011
Oxygen generator uses molecular sieve pressure swing adsorption principle, takes air as raw material, and absorbs nitrogen and other gas components to improve oxygen concentration to produce oxygen-enriched air. Oxygen concentration ranges from 90% to 96% (VA/), which can provide oxygen for therapy or relieve discomfort caused by hypoxia. When the equipment works, compressed air is injected into a closed adsorption tower filled with molecular sieve, which causes the pressure in the adsorption tower to rise. With the increase of environmental pressure, the molecular sieve absorbs a large amount of nitrogen in the compressed air, while oxygen in the compressed air still exists in the form of gas and is collected through a certain pipeline. This process is often referred to as the "adsorption" process. When the nitrogen adsorbed by the molecular sieve in the container reaches the critical state of adsorption saturation, the adsorption tower is blown to reduce pressure. With the decrease of environmental pressure, the ability of molecular sieve to adsorb nitrogen decreases, and nitrogen is released back to the gas phase from the molecular sieve and discharged as waste gas. This process is often called "desorption". In order to ensure the continuous and stable output of oxygen, the oxygen generator usually adopts two (or more) molecular sieve adsorption towers, which are controlled by rotating separation valves, so that one adsorption tower is in the adsorption process while the other adsorption tower is in the desorption process, and the two work alternately to complete the continuous oxygen production process.
Oxygenators Two models 110V,22V Options for moderate disease
Oxygen Cylinder
