Oxygen Mask Pediatric It is made of medical grade PVC. nonsterile. Ergonomic mask compatible with facial contours. Channeled 200 cm connection hose resistant to breakage and bending. Connector conforming to standards. It is disposable.
Product: PSA oxygen generator with cylinder filling system Equipment: Air compressor / Air refrigeration unit / Air purification system / Fractionating column / Filling system Advantages: Cost-effective, Easy to install and maintain, Automatic and unattended operation, Produces oxygen from only raw material - ambient air
In electric arc furnace steelmaking, oxygen or other gases are delivered to melt and refine steel in the electric arc furnace. (2) Inject other powder additives to adjust steel grades or make special steel. (3) Remove the slag in the oxygen converter. (4) Other uses, such as strong heat resistance, oxidation resistance, sulfidation resistance and corrosion resistance. steelmaking oxygen lance oxygen lance electric furnace steelmaking 1. Low consumption. The high temperature resistant coating forms strong heat resistance and oxidation resistance together, which can achieve the minimum consumption of oxygen blower and reduce the cost. 2. High quality: all production links from the selection of raw materials to the production of finished products are under strict quality control management. 3. Low price: The production line formed by the more advanced production equipment realizes the high quality and low price of the products. Specification Editing Broadcast Specifications and models of oxygen blowing pipes are: 5*1, 5*1.5, 6*1, 6*1.2, 6*1.5, 8*1, 8*1.2, 8*1.5, 9.52*1.24, 10*1, 10*1.2 , 10*1.5, 10*1.8, 10*2, 10.5*2.5, 12*1, 12*1.2, 12*1.5, 12*1.8, 12*2, 13*1, 13*1.2, 13*1.5, 13 *2, 14*1, 14*1.2, 14*1.5, 14*2, 16*1, 16*1.2, 16*1.3, 16*1.4, 16*1.5, 16*2, 17*2, 18*2 , 19*2, 20*2, 21*2, 22*2, 27*2, to 38*11, etc. Oxygen blowing pipes are widely used in construction and industry. The cleaning and preheating of oxygen blowing pipes are as follows: Before spraying (throwing) treatment, use cleaning method to remove grease and fouling on the surface of the oxygen blowing pipe, and use a heating furnace to preheat the pipe body to 40-60 �°C to keep the surface of the oxygen blowing pipe dry. In the spraying (throwing) treatment, since the surface of the oxygen blowing pipe does not contain grease and other dirt, the effect of rust removal can be enhanced. The surface of the oxygen blowing pipe after rust removal is cleaner.
Weight : 29.5kg External dimension : 390mmX350mmX720mm Power : 750VA Average sound pressure level: 60dB Oxygen pressure : 30-60KPa Oxygen flow : 10L/min Oxygen concentration : 90%(V/V) -Select CECA top molecular sieve to stabilize oxygen production. -With ultra-long cumulative timing function, the total working time can be seen at a glance. With timing shutdown function, saving time and worry. - The compressor has a thermal protection switch to ensure the safety of the whole machine.
FLOW RATE 10 LPM OXYGEN CONCENTRATION 93% EASY TO USE MADE IN JAPAN 2 YEARS SERVICE WARRANTY
Included: 1. Air oxygen blender 2. Humidifier with disposable chamber 3. Support arm 4. Adult disposable breathing circuit with a heated wire 5. Nasal cannula 6. Trolley 7. Medical air compressor 8. Tool kits Package: 1 unit/ 2 cartons 1st cartonï¼? 90.0 x 43.5 x 30.0cm / 0.1175CBM G.W.: 19.6kg 2nd carton 70.0 x 70.0 x 56.0cm / 0.2744CBM G.W.: 55.0kg
medical oxygen Oxygen connector 1.5M/1.8M/2M/5METC
Power Source AC 220V, 50-60Hz (Optional: AC 110V, 50-60Hz) Heated Plate 150W Thermal Cut Off 95±6oC Display Three digit, 0.56 inch, 7 segment Led Temperature Monitoring 0-75oC Max-temperature of Heated Plate 85oC Heated Wire AC 22V 60W, 50-60Hz Power Rate 220W Alarm Yes Temperature Control Setting Invasive Mode:Chamber outlet: 35.5-37oC, Airway: 35-40oC Non-invasive Mode:Chamber outlet: 31oC, Airway: 28-34oC Range 10-70oC, Accuracy: ±2oC (In 25-45oC temperature range)
OX-5A Delivery Rate (LPM) : 0.5~5 Maximum Fow (LPM) : 5 Output Pressure (KPa) : 58 ± 6 (8.5 ±0.5psi) Purity (%) : 93 �±3(0.5-5.0 L) Power Consumption ( W ) : 300 ( Aver.) Weight (Kg) : 14.6 Noise Level dB(A) : front 1 M < 42 Dimensions (mm) : 368 (L) x 342 (W) x 572 (H) OCI ( Optional ) Warranty : 3 Years
Oxygen generator uses molecular sieve pressure swing adsorption principle, takes air as raw material, and absorbs nitrogen and other gas components to improve oxygen concentration to produce oxygen-enriched air. Oxygen concentration ranges from 90% to 96% (VA/), which can provide oxygen for therapy or relieve discomfort caused by hypoxia. When the equipment works, compressed air is injected into a closed adsorption tower filled with molecular sieve, which causes the pressure in the adsorption tower to rise. With the increase of environmental pressure, the molecular sieve absorbs a large amount of nitrogen in the compressed air, while oxygen in the compressed air still exists in the form of gas and is collected through a certain pipeline. This process is often referred to as the "adsorption" process. When the nitrogen adsorbed by the molecular sieve in the container reaches the critical state of adsorption saturation, the adsorption tower is blown to reduce pressure. With the decrease of environmental pressure, the ability of molecular sieve to adsorb nitrogen decreases, and nitrogen is released back to the gas phase from the molecular sieve and discharged as waste gas. This process is often called "desorption". In order to ensure the continuous and stable output of oxygen, the oxygen generator usually adopts two (or more) molecular sieve adsorption towers, which are controlled by rotating separation valves, so that one adsorption tower is in the adsorption process while the other adsorption tower is in the desorption process, and the two work alternately to complete the continuous oxygen production process.
Oxygenators Two models 110V,22V Options for moderate disease
10L oxygen concentrator Model: QJ-ZY10La CE certificate & China government medical approval 10L, dual outlet , Purity: 90%~93%, medical grade. With humidification bottle High quality molecular sieve, oil-free compressor with long lifespan Timing as per user setting, automatically shut off 220V@50/60Hz, 700W
Home care oxygen concentrator: Model: QJ-ZY02A Fashion design 2L model (90~93%), up to 6L Easy operation Oil-free compressor with low running noise CECA Molecular sieve Humidifying Cup 220V@50Hz/60Hz SOS help emergency call
The Zxdh series hydrogen generator produced by Zhongxinda has a capacity from 2 ~ 250m3 / h, which is controlled by a new type of programmable logic controller (PLC), providing users with an efficient, reliable and safe hydrogen production system. The company's hydrogen generator is also equipped with a variety of control methods and auxiliary equipment for users to configure according to the best working conditions. The hydrogen production capacity of a single electrolyzer of the water electrolysis hydrogen production equipment produced by Zhongxinda ranges from 2m3 / h to 1000m3 / h. Designed for easy installation and safe, reliable, unattended operation, it provides on-site on-demand industrial gas generators to provide ultra pure H2 and O2.
MICiTECH 5L Oxygen Concentrator Model CP501 With PSA technology to make oxygen, 0.5L-5L/Min oxygen concentrator. Our oxygen concentrator is energy-saving and safe to use. Specification Model No.: CP501 Pressure: 40kpa-60kpa Flow: 0.5L-5L/min Purity: 93%�±3% Weight: 14.5kg Noise: ï¼?45dB(A) Power consumption: 360VA Dimension: 400mm*300mm*540mm Voltage/Frequency: 220V/50Hz�±1Hz or 115V/60Hz
Products Specification Model No.: CP101 Pressure: 60kpa-80kpa Flow: 1L-10L/min Purity: 93%�±3% Weight: 20.5kg Noise: ï¼?55dB(A) Power consumption: 550VA Dimension: 400mm*300mm*540mm Voltage/Frequency: 220V/50Hz ±1Hz or 115V/60Hz Cerficate: CE/ISO9001/ISO13485
#Owgel 10L Concentrator Product Description ð??? Technology German process air compressor, French molecular sieve, Dual filter system, Frosted plastic shell, Silent pulley, LCD, High quality motor, Anti aging test ð???Quality High quality, Pass SGS Certification ð??? Feature 1.German technology 2.Own patent 3.French molecular sieve 4.Oxygen concentration 93%�±3% 5.The two functions of oxygen generation and atomization. Oxygen concentration can be used For 2 people at the same time 6.Application range: 0-5000 m altitude 7.5L and 10L can be switched freely ð??? Specification Model : OZ-501GW0 Dimensionï¼?MMï¼?: 390*250*720 mm Weight : 29.5KG Function : Oxygen generation, nebulization, timer Flow Specifications : 0-5000m altitude 7.5L and 10L can be switched freely Oxygen Concentration : â?¥93士3 Oxygen Output Pressure : 30-60Kpa Electrical Requirements : Customized 110-220V Noise Level :
Olive Oxygen Concentrator Model No. OLV-10S Voltage AC220V ± 22V, 50Hz ± 1Hz/110v ± 15V,60Hz ± 1Hz Outlet Pressure 20Kpa-60Kpa Flow Rate 0-10L/min Oxygen Purity 93% ±3% Sound Level Less than 50db Input Power 600VA Net Weight 28Kgs Dimension(MM) 350�?250�?670mm Working System Continuous flow Atomization Quantity 0.15ml/min(Only modes with atomization function) Warranty Two Years Standard Accessories 2*Nasal Cannula 1*Humidifier Bottle 1*Extra Hepa Filter 1*Extra First Filter 1*User Manual 1*Warranty Card Features Accompany You With Health
Cryogenic Liquid Oxygen Cylinder Storage Tanks -
Liquid Frozen Pure Argon Gas,Liquid Argon -
