Medical gas terminal outlet Medikar q-click terminal units newly designed arised from the difficulties of repairing and replacing medical gas terminal units in working hospital areas, especially in intensive care units, sbcu, operation theatres, and emergency departments where highly crowded and continuous patient and staff movement exist. It is very difficult to shut off gas flow and perform maintenance on the usual terminal units. Medikar q-click terminal units allow the maintenance, repair and replacement of the terminal units so easy that it takes only a few seconds. Also medikar q-click terminal units allow changing 2nd fix and convert the unit from bs standard to din standard or to en standard and vice versa. Medikar q-click terminal units consist of three main parts : a) base block (1st fix), b) cartridge and c) main body (2nd fix). A) Base block (1st fix) : made of forged brass and has a maintenance valve inside. It is tested under 10 bar pressure and contains gas specific pins and patented q-click mechanism. Inlet can be supplied by either brazed copper tube or brazed nist connector depending on the installation place. B) Cartridge : made of machined brass ; contains check valve which is the same for all gas types but differs according to the standard applied. C) Main body (2nd fix) : this is the part which makes our difference from other gas outlets. It consists of a locking mechanism, an indexing part for gas and standard differentiation and identification plate.
Oxygen concentrator Flow: 5l/min Purity: above 90% Pressure:0.03-0.07mpa Sound level: less than 50db Power consumption: 450w with 220/50 or 110/60-50 or 220/60 Weight: 29kg. Dimension:47x48x52cm Each unit packed in a carton with standard accessaries
An oxygen mask with a reservoir bag and tube is a medical device used to deliver oxygen to patients who require supplemental oxygen therapy. Oxygen Mask: The mask is placed over the patient's nose and mouth to deliver oxygen directly to their airways. It's usually made of soft, clear plastic and is adjustable to ensure a secure and comfortable fit. Reservoir Bag: The reservoir bag is attached to the oxygen mask and serves as a temporary storage space for oxygen. It allows the patient to breathe in a higher concentration of oxygen during each breath, especially during inhalation. Tube: The tube connects the oxygen source, such as an oxygen tank or concentrator, to the oxygen mask.
Product Price: Rs 53,000 / Unit Product Details: Capacity(Litre per minute) 5 LPM Brand Philips Oxygen Concentration 93 +/- 3 % Sound Level 45 (typical) dB Weight (in kg) 14 kgs Dimension 58.4 cm H x 38.1 cm W x 24.1 cm D (23" H x 15" W x 9.5" D) Alarm Low Oxygen (82%) and Very Low Oxygen (70%) I Deal In New Only Input Voltage 120 +/- 10% VAC Input Frequency 60 Hz Until now, oxygen concentrators have been very similar - heavy, bulky, noisy, or requiring frequent maintenance. EverFlo from Respironics is a unique stationary concentrator that delivers what homecare providers want and patients deserve. Features: Lightweight for easy transport The EverFlo Oxygen concentrator weighs in at only 31 pounds, reducing shipping and storage costs and risk of injury. Compact design looks less like a medical machine EverFlo's ergonomic design takes up less space and doesn't draw as much attention. The Right Fit series focuses on patients' needs EverFlo is part of the Right Fit, a complete portfolio of oxygen products and programs inspired by patients and built for business. Low maintenance for reduced service costs No homecare provider filter change for two years. Patients do not ever have to change filters. Lower power consumption makes EverFlo patient-friendly The system uses less electricity and produces less heat. Humidifier Bottle Platform for extra flexibility The platform is designed to be compatible with all bottle styles and features an easy-to-use velcro closure. Recessed flow meter reduces accidental breakage Recessed flow meter reduces accidental breakage Oxygen purity indicator option for increased security EverFlo is available with or without oxygen purity indicator. This OPI (Oxygen Percentage Indicator) ultrasonically measures oxygen output as a purity indication.
Product Details: Model Name/Number 1025DS Capacity(Litre per minute) 10 LPM Brand DeVilbiss Oxygen Concentration 96% Warranty 3 years Sound Level 40 Weight (in kg) 19 kg Flow Single Flow Product Type Stationary Outlet Pressure 20.0 +/- 1.0 psi Power Consumption 639 Watts Dimensions 62.2 x 34.2 x 30.4 cm Alarm Audible and visual high pressure, low/high flow, low oxygen, high gas temperature, power failure, Ox Clear design for easy use Lightweight and compact Digital hour meter easy to read the top of the device Convenient top and side hamdles for easy transport Front label with clear visible LED's and easy to read High performance Capable of delivering yp to 96% purity from 2 lpm to 10 lpm OSD sensor for continously monitoring oxygen levels Can easily incorporate a comaptible transfill system, via the auxillary oxygen port and comaptible transfill caddy. Reliable Safety features Oxygen outlet incorporating a fire protection adpater Tested in high temperature and high humidity for extended peroids of time Alrams do not require a battery and indicate power failure, high gas temperature, high pressure, low and high flow, low oxygen and service required
We have ready stocks of Voltmi Oxygen Concentrators in India and Hong Kong. The concentrators are 10 Liters version, France imported CECA molecular sieve, High oxygen purity 93% �± 3%, a Long lifespan of more than 18000 hours, 3 years warranty Large LED display and with Voice function. We have also supplied our goods to some very big government organizations in Hong Kong & India.
Input pressure 15Mpa Output pressure 0.2-0.3 Mpa Flow range:1-10L/min It has different styles
Size:5L/10L Voltage:110v /220v
Size:10Nm/H, 20 Nm/H,30Nm/H,50Nm/H,60Nm/H High quality easy to installation with
Source - CHENG Category - 12/31 Unit - PCS Certs - FDA CE
It is suitable for oxygen transmission performance testing of films, sheets, paper, packaging, and related materials in the fields of food, medicine, medical equipment, daily chemicals, photovoltaic electronics, etc., and provides a wide range and high-efficiency oxygen transmission rate detection for high, medium and low oxygen barrier materials.
W11 Home health oxygen generator 7L adjustable large flow Up to 93% oxygen concentration Low noise and mute design,quiet and comfortable . Whether it s a quiet afternoon or a sleepy night ,It all works silently and gives you a comfortable experience. High-performance compressors provide surging power ,One-button start , fast oxygen production without waiting . Intelligent voice broadcastin Intelligent and humanized voice broadcasting ,Broadcast every operation in real time . Remote control
Features: Adjustable oxy-gen conce-ntration: supply continous flow 1-7L/min adjustable, 30%-90%. Portable and lightweight, Could work plug-in home power supply(AC 110V ) for continuous working 24 hours a day if you do not set timer. Intelligent Control: IMD beautiful large color panel, easy to operate, large color LED screen, Flow regulation, voice broadcast function,timer operation function and with infrared remote control, it is easier and more convenient. Anion function: This machine is equipped with ion function, and a "negative" button; the negative ion system can work alone , you can also work simultaneously with theoxygen system. Multi-layer filter, self-easy to replace: The oxygen system of this product has coarse dust filter, fine dust filter andthree bacterial filtration treatment for the input air respectively, finally, theoxygen is fresh and clean after filtering , and the two front layers filter canbe replaced without disassembing, the user operate it comfortably.
Portable Oxygen Concentrator Machine Generator Oxygen 1-7L/Min 48hours Making Machine Without Battery Air Purifier AC Concentra Features: Adjustable oxy-gen conce-ntration: supply continous flow 1-7L/min adjustable, 30%-90%. Portable and lightweight, Could work plug-in home power supply(AC 110V ) for continuous working 24 hours a day if you do not set timer. Intelligent Control: IMD beautiful large color panel, easy to operate, large color LED screen, Flow regulation, voice broadcast function,timer operation function and with infrared remote control, it is easier and more convenient. Anion function: This machine is equipped with ion function, and a "negative" button; the negative ion system can work alone , you can also work simultaneously with theoxygen system. Multi-layer filter, self-easy to replace: The oxygen system of this product has coarse dust filter, fine dust filter andthree bacterial filtration treatment for the input air respectively, finally, theoxygen is fresh and clean after filtering , and the two front layers filter canbe replaced without disassembing, the user operate it comfortably. Specifications: Flow range: 1-7L 93% ± 3% concentration at 1L oxygen flow Noise of the whole machine: < 60dB (a) Power supply: AC110V60Hz Input power: 120W Net weight: About 6kg Boundary dimension: 284X187X302 (mm) Minimum working time: no less than 30 minutes; Electrical classification: equipment of "type" Working system: continuous operation; Oxygen outlet temperature 46 C; Suggestion: the length of oxygen absorption pipe shall not exceed 15.2m, and shall not be folded; Waterproof grade: IPX0
Sterile Twin Bore Nasal Oxygen Set
Place of Origin : China Brand Name : OEM Model Number : JAY-10 Power Source : Electric Warranty : 1 Year, 1 Year After-sale Service : Online technical support Material : metal, Plastic, Steel Shelf Life : 1 years Quality Certification : CE Instrument classification : Class II Safety standard : GB2626-2006 Type : oxygen concentrator Power : AC220V + 10%, 50/60 + 1Hz; AC110V + 10%, 50/60 + 1Hz Power Consumption : 550W Flow rate : 0-10L/min Purity : 93 + 3% Sound Level : 50db Outlet Pressure (Mpa) : 0.04-0.07 Net Weight : 28 Kgs Size (mm) : 365*375*600mm
Pressure:High Material:steel Use:Medical Gas Product name:O2 gas cylinder Color:As the picture/Customized Standard:ISO9809-3 Outside diametor:219MM Water capacity:40L Height(without valve):1315mm Weight(without valve/cap):48Kg Service pressure:15mpa Design wall thickness:5.7mm
Technology brief There has been a growing demand for small and medium-sized oxygen equipment with rapid development of the national economy in recent years. Beijing Peking University Pioneer Technology Co., Ltd. (hereinafter referred to as PKU PIONEER), seizing this market opportunity with its advanced technology and engineering experience of more than 100 sets of oxygen equipment, has produced the customized the new skid-mounted PSA oxygen equipment through its continuous development and innovation. The PSA-O2 generator meets a wide range of requirements for users in need of small and medium-sized oxygen equipment. It has remarkable advantages on its stability, simplicity, efficiency and energy saving. Production Capacity 50Nm3/h-450Nm3/h, equivalent to liquid oxygen of about 1.7 TPD-15.4 TPD. Typical Applications The PSA-O2 generator is widely used in water treatment, flue gas ozone denitrification, kiln combustion, pulp bleaching, aquaculture, medical and other fields. Technical Advantages 1. Advanced single-vessel process Compared with the traditional double-vessel process, the world-leading single-vessel process requires less equipment but brings more stable performance with easier operation and maintenance. 2. High efficiency lithium-based molecular sieve The third generation of high-efficiency lithium-based oxygen generation molecular sieve (PU-8) has a lithium ion exchange rate of over 99%, bringing plenty of advantages such as high strength, high nitrogen and oxygen selectivity, large bulk density, uniform particles, long service life, etc. In combination with the proprietary automatic filling technology, the stability of the molecular sieve bed is effectively guaranteed. 3. Special valves for oxygen generation Special valves for oxygen generation are more suitable for VPSA oxygen process, offering good sealing, fast switching speed, stable performance and other characteristics, along with outstanding low failure rate and easy maintenance. 4. Modular integrated design Compared with the conventional double-vessel process, the equipment is more compact and the plot area can be reduced by more than 20%. 5. Low operation cost The power consumption of oxygen is as low as 0.29-0.32kWh/Nm3, the annual maintenance cost is 30% lower than that of a common PSA oxygen generator. The annual comprehensive operation cost is also reduced by more than 50%, compared with the cost of common PSA oxygen generator or purchasing liquid oxygen.
Technology Brief Based on the principle of VPSA technology, the VPSA-O2 units adopt the special adsorbent (model: PU-8) to enrich the oxygen in the air and supply it to the user. Production Capacity 1000Nm3/h~40000 Nm3/h, Converted to liquid oxygen: 34 TPD~1360 TPD Typical Applications > Steel: Blast furnace oxygen-rich coal injection, electric furnace steelmaking > Non-ferrous metallurgy: combustion-supporting for non-ferrous metals metallurgy including copper, lead, nickel, zinc, tin and gold. > Chemical: gasification furnace oxygen-rich gas making, carbon black production, sulphur trioxide production etc. > Kiln energy-saving: combustion supporting for glass kilns, cement kilns and oxygen-rich combustion supporting for waste incinerators > Papermaking: pulp bleaching process > Sewage treatment: OEAA technology, oxygen source for ozonizer Technical Advantages 1. Experienced engineering PKU PIONEER has built the most VPSA-O2 plants in China, including the world's largest VPSA-O2 plant. 2. Excellent energy consumption Energy consumption of PKU PIONEER's VPSA-O2 plant is 0.29-0.32kWh/m3 O2, which is among the lowest, around the world. 3. Internationally-leading process design PKU PIONEER has built up the first set of radial bed in China. Independently-developed five-bed, air intake and other original process designs have proved obvious advantages. 4. The independently-developed lithium-based adsorbent PKU PIONEER's independently-developed and produced lithium-based VPSA-O2 adsorbent PU-8 is featured by high selectivity and high working capacity of nitrogen, which is among the best around the world. 5. Mature and reliable system running The long-term engineering practice has proved that PKU PIONEER's VPSA-O2 plants are stable and the supplementary devices are mature and reliable, thus ensuring the continuous production for users.
Product: PSA oxygen generator with cylinder filling system Equipment: Air compressor / Air refrigeration unit / Air purification system / Fractionating column / Filling system Advantages: Cost-effective, Easy to install and maintain, Automatic and unattended operation, Produces oxygen from only raw material - ambient air
