MANGANESE ORE SELL FROM PERU CAJAMARCA 43% REJECTION 40% FOB SALAVERRY PORT PERU BULK
Ferro Manganese 1. Introduction : 1) Ferro Manganese is an alloy of Iron and manganese, with manganese between 65.0%~90.0%, as deoxidizer and alloying element additive. 2) Divided into furnace ferromanganese and blast furnace ferromanganese. 3) Main categories: high carbon ferromanganese (carbon 7%), medium carbon ferromanganese (carbon 1.0~1.5%), low carbon ferromanganese (0.5% carbon), metal manganese, Spiegel, Silicon-manganese alloy. 4) International general standard for carbon ferromanganese containing mananese with 75 ~ 80%. To adapt to the conditions of low grade raw ore, China provides manganese lower grades (furnace ferromanganese manganese containing more than 65%, blast furnace ferromanganese manganese containing more than 50%). 5) With the particle size of 10-100mm or natural block delivery, special requirements available. 2. SPECIFICATIONS: Type Brand Chemical Compositions (%) Mn C Si P S 1 2 1 2 ¡¨¹ Low-carbon ferromanganese FeMn88C0.2 85.0-92.0 0.2 1.0 2.0 0.10 0.30 0.02 FeMn84C0.4 80.0-87.0 0.4 1.0 2.0 0.15 0.30 0.02 FeMn84C0.7 80.0-87.0 0.7 1.0 2.0 0.20 0.30 0.02 Medium-carbon ferromanganese FeMn82C1.0 78.0-85.0 1.0 1.5 2.5 0.20 0.35 0.03 FeMn82C1.5 78.0-85.0 1.5 1.5 2.5 0.20 0.35 0.03 FeMn78C2.0 75.0-82.0 2.0 1.5 2.5 0.20 0.40 0.03 High-carbon ferromanganese FeMn78C8.0 70.0-82.0 8.0 1.5 2.5 0.20 0.33 0.03 FeMn74C7.5 70.0-77.0 7.5 2.0 3.0 0.25 0.38 0.03 FeMn68C7.0 65.0-72.0 7.0 2.5 4.5 0.25 0.40 0.03 APPLICATION : 1) Mainly used as alloy additives and deoxidizer in steelmaking. 2) Used as alloy agent ,widely applied to be widely applied to alloy steel, such as structural steel, tool steel, stainless and heat-resistant steel and abrasion-resistant steel. 3) It also has the performance that it can desulfurize and decrease the harmfulness of sulfur. So when we make steel and cast iron, we always need certain account of manganese. 1000kg/Bag
32% manganese 50000 mt per month Fot mine posmansburg Loose lumpies
We can offer you Ferro-Silico-Manganese high Carbon as follows: Commodity : Ferro-Silico-Manganese Origin : Indian Min. order : 1.000 mt. Packing : Big Bag and container Payment : L/C, Indian port Specification : Mn : 60% MIN Si : 13-17% C : 2-2.5% P : 0.3% MAX S : 0.05% Price : USD 1.020/mt., FOB Mundra port India Specification : Mn : 70-80% C : 6-8% P : 0.4% Max S : 0.05% Max Si : 1.5% Max Price : USD 1.055/mt., FOB Mundra port India Best regards, B. Adily
SILICO MANGANESE
Low Carbon Ferro manganese constitutes approximately 80% of manganese and 1% of carbon with lower contents of sulphur, phosphorous and silicon. Low carbon Ferro Manganese is mostly used in the welding industry. It is an essential ingredient for making high-strength low-alloy steel and stainless steel. Form- Solid, Carbon- 0.50%, Phosphorus- 0.20%, Silicon- 0.6%, Sulphur-0.05%,
type of package :in big-bag chemical composition Mn65%-70% Si 15%-17% C 1.6% P 0.035% S 0.02% Fraction 10-80 This product is in Georgia ,the place of boot is Port of poti ,we can sell every month 1000MT I
40%min and up
Manganese
Nitrided Manganese metal flakes Spec.: Mn 87%min N 7%min C 0.1% Si 0.5%max Size: 0-2mm,90%min Nitrided Ferro Manganese Spec.: Mn 65-70% N 6-7% C 0.1%max Si 1.0%max Size: Lump 10-80mm,90%min Nitrided Ferro Manganese Spec.: Mn 70-75% N 6-8% C 0.1%max Si 1.0%max Size: Lump 10-50mm,90%min Packing: in 1 mt big bag, then into 20FT container
Manganese : FOB Karachi port : $205/MT
Manganese sand filter materials Manganese sand filter material appearance rough brown or light gray, suborbicular, ingredient is manganese dioxide, content is between 35% and 45%. Use it to deal with groundwater, simple technology, convenient operation, cover an area of an area small, low engineering cost, long-term stability, the service period in 5 years, easy management, do not add any chemicals to remove the harmful material such as fe, mn, arsenic water, the purpose of the water quality fully meet the national drinking water standard, groundwater is a very good filter material processing. Manganese sand filter materials are using high quality domestic manganese sand, grain density, mechanical strength, strong chemical activity, not easily broken, insoluble in water, natural manganese ores. After the water washing grinding in removing impurity, crushing, drying, magnetic separation, screening, dust removal process into sand, etc. Then processed manganese sand according to certain gradation blending. It has the ideal water treatment filter, grading scale, making it in unit volume, specific surface area of the largest, the most powerful section carrying capacity, the catalytic oxidation of the largest and the smallest backwash turnover. Manganese sand filter materials used in the iron and manganese removal of domestic and drinking water filter device, the filtering effect is very good. Manganese sand filter material is mainly used to reduce the total iron, ferromanganese and manganese content in the water, according to china's domestic and drinking water hygiene standard gauge its iron long drink water containing high iron manganese content will seriously affect health.
MANGANESE ORE FROM BRAZIL 40% + Manganese Ore low in Iron (Fe), 40% or more in Manganese (Mn) concentration For specific contents of Fe, P, S, SiO2, Al2O3, please send your specifications TOTAL CAPACITY: 100,000 MT/MONTH AVAILABLE CAPACITY: 50,000MT/MONTH MOQ: 1,000/MONTH OBS.: Product is in nature and can be modified in the oven according to buyers request PACKING: As buyer request ORDER DELIVERY: Upon Request PAYMENT TERMS: SBLC from World Top 50 Banks LC TERM: At sight upon delivery of BL CERTIFICATION OF QUANTITY AND QUALITY PROVIDED BEFORE SHIPMENT VISITS AVAILABLE AT THE QUARRY IN BRAZIL Please, for more information, contact us at: sales@gotrade.asia
Manganese
High Carbon Silico Manganese - Standard Grades Mn : 60% Min. / 65% Min. / 70% Min. Si : 15% Min. / 16% Min. / 17% Min. C : 2 % Max. P : 0.30 % Max. S : 0.03 % Max. Size: 10 - 60 mm
High Carbon Ferro Manganese - Standard Grades Mn : 70% Min. / 76% Min Si : 1.5% Max. C : 6-8% P : 0.30% Max. / 0.35% Max. S : 0.03% Max. Size : 10 - 80/100 mm
MANGANESE ORE FINES SPECIFICATIONS Mn% 18-20 20-22 22-24 Fe% 32-34 30-32 26-28 Al2o3% 10-12 8-10 9-10 Sio2% 11-12 10-12 11-12 P% 0.05-0.07 0.05-0.07 0.05-0.07 S% 0.008 0.008 0.008 LOI% 8 -11 6 - 8 6 - 8 Size - 10 mm 10 mm 10 mm
Manganese ore 44% and above.
Mn 37 % SiO2 15-20 % H2O 11 % Al2O3 2.15 % P 0.2 % CaO 4-5 Fe 1.3-1.4 S 0.2-0.25 Size 20-0 mm
The main characteristics is a superior wear resistance: Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plates) up to an in-service hardness of at least 600BHN. Typical Applications: · Quarries and Constructions: Earth moving crusher jaw, grizzly, screen, stone chutes, chain guide and shredder plates, shovel buckets. · Mines: Bucket blade of loader, chain conveyor parts, sprocket wheel, various armouring elements. · Iron Industry, Foundry: Guiding and shifting plates, scraps container, liner of shot blasting unit, pedestal liner, flanged bolster cup, wear liner. · Concrete and Brickworks: Core and dividing wall of parpen mould, grinding mill scraper, mixer paddle. · Scraps â?? Recoveries: Wheel disk, striker and hammer mill. · Automotive Industries: Shot blasting equipment. It is also used for its low coefficient of friction in metal-to-metal applications, its non-magnetic properties in electrical transformer assemblies and for industrial lifting magnets. A high manganese, fully austenitic, quench annealed, non magnetic, work-hardening steel with an exceptionally high level of wear resistance when subjected to work-hardening by shock or high impact pressure in service. The main characteristics is a superior wear resistance: Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plate) up to an in-service hardness of at least 600BHN. This work-hardening capability renews itself through out in-service life.The underlayers not work-hardened maintain an excellent resistance to shock and a very high ductility.
