Titanium Dioxide rutile sand min 94-96 percent
Titanium Dioxide (TiO2) available, 98.5% and 99% or more TiO2 content. Used as food grade, high-grade chemical fiber and high-grade paper. Molecular weight: 79.9 Property: Specific gravity 3.9, stable chemical property. Product Appearance: White Powder. TiO2 content equal or more than 99% (this grade Product Reference Standards: European Pharmacopoeia EPâ??97 and American Pharmacopoeia USP). This product can be used for opaque capsules, film coating of tablets, frost, medicinal packaging materials etc. Western ink can also be used in cosmetic additives, food white additives, electronic industry, and ceramic industry. TiO2 content equal or more than 98.5%. Suitable for high-grade interior wall latex paint, ink, paper, rubber and for coatings, plastics, master-batch industry.
Core steel plate Specification for core steel plate 1.0Scope 1.1 this specification covers the grain oriented electrical steels are iron-silicon alloys that provide Low core loss and high permeability needed for more efficient and economical electrical Transformers. Cold rolled grain oriented (crgo) grades of electrical steel are typically used For transformer cores and large generators. 2.0Application 2.1 the cgro is used regularly for cores in transformers. 3.0Standard 3.1 this specification is prepared by taking guidance from bs 601:1973 4.0Material 4.1 cold rolled grain oriented (crgo) grade m5, moh, zdkh as per bs 601:1973 and Equivalent to jis c 2553 5.0Properties 5.1 specifications and typical electrical and magnetic properties (see appendix 1) 6.0Dimension and tolerance 6.1 dimension : as per the purchase order with the tolerance as given table below Tolerance on width Nominal width (mm) OverUp to and includingTolerance (mm) 0150+ 0 0.3 150500+ 0 0.5 001000+ 0 1.5 Tolerance on length Nominal width (mm) OverUp to and includingTolerance (mm) 02000- 0 + 1.5 2000>2000- 0 + 2.0 Tolerance on length The tolerance on the mean thickness, measured by contact micrometer, for any coil shall be + 0.03 mm from the nominal thickness. Tolerance on edge burr The tolerance on edge burr not to exceed 0.05mm. Tolerance on edge camber Edge camber is the lateral departure of the edge of the strip from a straight line forming a chord, refer figure a: Tolerance on edge camber of strip in coil shall not exceed 2 m in 2000 mm and shall be measured against a straight edge using a 2000 mm length cut from a coil. 7.0References (1) bs 601: 1973, steel sheet and strip magnetic circuits of electrical apparatus. As provided above
Sugar, chicken paws and copper cathode plate, en 590 diesel.Export and manufaturer.
Grade: 301, 304, 304l, 316l, 410, 420j2, 430 etc. Thickness: 0.020 mm up Width: 5.00 mm up Temper: soft, 1/2h, 3/4h, fh, eh, seh, high yield etc. Surface finish: 2b, ba etc. Seaworthy export packing.
Hot-rolled steel plates or steel sheets in various thickness and size. Thickness 1.2mm~75mm. Max width 8ft. Max length 12192mm. Standard size or customized size available for request. Specs: ASTM / JIS G3101 / JIS G 3131 / JIS G3132 / JIS G3113 / BSEN 10025 or equivalent / as per requested. Grade: A36, A516, A588, A283, SS400, SS490, S275, S355, SPHC, SAPH or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
ETP (Electrolytic Tinplate) Origin: Europe (Belgium) Loading From: Port of Antwerp Quantity: 2000+ MT Selection: Allowed For, Malaysia, Vietnam, Taiwan, Sri Lanka, Bangladesh, India and any Asian Country If you are interested on kindly contact us,
Minimum Quantity 1000,000 Barrels per month Maximum Quantity 5,000,000 Barrels per month.
Diesel EN 590
Purity of Copper : CU Purity 99.99% min Production Method : Copper Pyro Metallurgy Dimension : 914mm x 914mm x 12 mm Weight Of Each Sheet : 125 kg ( +, - 1% ) Weight Of Each Pallet : 2 MT ( +,- 1% ) Weight Of Each 20 Ft. Ctr : 20 MT appox
Polarization: 99.80% degrees min Ash by electrical conduct: 0.04% max (on dry weight basis) Ash content: 0.04% max Moisture: 0.04% max ICUMSA 45 RBU: Max (Brazil S.G.S scale) Solubility: 100% dry and free flowing Color: Sparkling white ICUMSA Maximum 45 attenuation index units (ICUMSA method #: 4-1978) Radiation: Within CS-137 of 50 BQ per Kg Granulation: Fine crystal Crop: Latest Magnetic particles: Mg/Kg 4 max SO2 mg/kg 20 max Sulfur Dioxide: 20 Mg/Kg min Sediments: None Smell: Typical and specific for sugar Reducing sugar: 0.05% Max by weight HPN Staph Aureus not detected in 1 gram Maximum AS: 1 P.P.M. Maximum PB: 1 P.P.M. Maximum CU: 3 P.P.M. Substance: Solid Crystal Tolerance: 5% (+/-) CHICKEN PAWS SPECIFICATIONS Quality: Grade A Frozen Chicken Paws Process: BQF Cut at the Level of the joints Meaty and Coating of Normal Fat Average Weight Per Piece: 35 â?? 45 grams Average Length Per Piece: 09 â?? 12 cm Processing: 100% Fresh and Frozen White Skin Shelf Life: 24 months Frozen Requirements: Blast Frozen at -40�°C Stocked and Stored: -18�°C During Transportation: -18 �°C Ice Content: Less Than 0.3% Outer Yellow Skin Off Well Dressed and Cleaned No Black Pads or Ammonia Burns No Bad Smells, No Excessive Blood or Blood Stains No Excess Water No-Broken Bones Fresh and Hard Nail * No Bruises No Feathers * No Hairs Moisture Contents Less Than 2% Production Age: Not More Than 60 days from the shipping date Chemical Burns Presence: No Chemical Burns Black Spot: Less than 1% Broken Bone: Less Than 1% Antibiotics: Presence Not Allowed Pathogenetic Organisms (Including Salmonella): Not Allowed Foreign Substances: Not Allowed * Remanants of Feathers: Not Allowed Frozen Requirement Drainage: 1�°C - 5�°C For 8 hours Moisture Content Less Than 1% Blasted at: -40�°C SIF code: 1, 103, 87, 121, 1001
Iron, copper, titanium.Business consultant
Tin plate.
Copper Cathode sheets, Titanium Dioxide Specialty kaolins.
Sheet pile.
Wafer, dummy/monitor/prime/spacer test wafer, thin wafer, aluminum wafer, test wafer / oxide wafer, special wafer .Trade, shipping
Kitchen sink, chafing dish.
Marine, steel plate, generators, oil & gas.
Titanium dioxide, thermal coal, steam coal, sludge palm oil, wood pellets, nitrile and latex glove household gloves, silica dioxide.
HR plates, coil, cutting plates, half cut plates, circle plates, e.g. plates, hot roll coil.
