The AP1000F is a high-production wheel paver that excels on airports runways, interstates, highways, and other large jobsites. Its high travel speed, optional front wheel assist, and all-wheel drive features deliver superb mobility. Standard Paving Range - 3 - 6 m (9' 10" - 19' 6") Hopper Capacity - Standard Entry - 267ft�³ Maximum Paving Speed - With Vibratory Screed - 250ft/min Inside Turn Radius - 1.5ft Maximum Paving Speed - With Tamper Bar Screed - 82ft/min Maximum Travel Speed - 12mile/h Hopper Capacity - Low Entry Hopper - 286ft³ Maximum Throughput Capacity - 1766tonnes/hr Maximum Paving Width - SE60 V Screed - 25ft Maximum Paving Width - SE60 V XW, VT XW Screed - 25ft
Lacqua is a Swiss Brand with high quality water, sourced from Italy. The brand was created by Martup GmbH, a startup incubator, with the aim of providing pure mountain water to the world. Available in the following sizes and bottle types- 0.5L PET 0.66L PET 1.5L PET 0.5L GLASS 0.75L GLASS
Mining
Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes. Features :- ~ 112L x 91W x 20H (mm); ~ Shank 55mm; ~ Load capacity up to 25 tons; ~ Highest reflectivity lens area 168 square millimeters; ~ High durability; ~ High impact resistance; ~ Grove bottom for better grip and easy installation; Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.
Greetings! GETO always focusing on formwork and scaffolding system R&D and development, design, production, leasing, sale, renovation and technical services. Our scaffolding is known as GT-18 Integrated Attaching Lifting Scaffolding and it is suitable for high-rise and super-high-rise buildings with frame or shear wall structures. Through the application in different sites, it has been proved that its performance is excellent, safe, reliable, stable operation, economic and practical, which brings great convenience to the construction and production for most users. Components: Lifting System, frame system, thunder protection system,anti fall and anti-tilt system and control system Lifting System: Consists of slideway, lifting hanging bracket, lower hanger frame, electric chain hoist, and over hanger frame. Frame System: Main component of attaching lifting scaffolding, and also the safe operation platform for constructors. The frame structure is mainly composed of Walkway plate, poling, Protective net, truss, turning plate etc. Thunder Protection System: The system consists of air termination, grounding grid and grounding wire Anti-falling, Anti-tilting System: The anti-falling and anti-tilting system is a supporting structure that is directly attached to the building structure and connected to the vertical main frame to withstand and transmit loads. With support, anti -fall, anti - capsize function. Control System: To form the control system, some essential components are computer,mobile phone, tablet PC, remote controller, sensor main control box, sub-control box, cable line and loading sensor.
Greetings! GETO offers comprehensive formwork solutions for different situations, for example, basement floors, podium floors, typical floors, etc. With well-constructed panels and reasonably-arranged reinforcement systems, our products can control the deviation of flatness and perpendicularity to achieve the plastering-free concreting finish. GETO aluminium formwork can 100% turn your design into reality and achieve no-plastering concreting to lower your cost on building surface decoration. GETO also has developed four types of aluminium formwork systems, which are Flat-Tie System, Tie-Rod System, Timber & Aluminium Formwork System, and Aluminum Formwork with Precast Concrete System. Application: Concrete casting / Building house Reusable times: More than 300 times Model Number:Aluminium alloy 6061-T6 After sale service: Online technical support, on-site installation, on-site training and inspection, free spare parts, return and replacement Place of Origin:China Characteristics: Large load capacity, light weight, high efficiency, low cost and long working life
New-Unused (Old Stock) Commodity: Genset Model: C18 Caterpillar Serial Number: (GPN00113) Power : 514Hp AT 1500RPM Available: 2 Unit only Location: Malaysia
Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Step drill attachment can be interchanged without tools. U.S.A. Key Specs Item# 3316250 Brand Darex Manufacturer's Warranty 12 months parts / 12 months labor Ship Weight 8.6 lbs Accessory Type Step drill attachment More Information Please Visit our website OFFICIAL STORE ECMETOOLS for catalog, transaction, full Description, Term and Conditions, best product, or special price.
Hitachi ZX135US-6 Excavator. Year of Manufacture: 2018. Specification: 14,700kg, Hydraulic Quick Coupler, Auxiliary Line, Boom & Dipper Check Valves, A/C, Good Undercarriage of Approximately 70% good. EPA & CE Machine. Working Hours: 7,150. Price: $39,500 USD ex works, Machine Location: Kuala Lumpur, Malaysia. Origin: The Netherlands, European Union. HS Code: 8429 5210 Minimum Order: 1 Unit Available Shipping Terms: We are happy to provide transportation & Shipping Prices should you require this. Payment Terms: 100% TT Before Shipping.
Our company provides all kinds of new and old PDC bit, roller bit, drill pipe, drilling jack, elevator tong and other drilling tools
