Hot-rolled steel plates or steel sheets in various thickness and size. Thickness 1.2mm~75mm. Max width 8ft. Max length 12192mm. Standard size or customized size available for request. Specs: ASTM / JIS G3101 / JIS G 3131 / JIS G3132 / JIS G3113 / BSEN 10025 or equivalent / as per requested. Grade: A36, A516, A588, A283, SS400, SS490, S275, S355, SPHC, SAPH or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Silicone sealant, adhesive, MS Polymer Sealant.
Model: SN-501 100% RTV Neutral Silicone Sealant Description : SN-501 is a one-part high performance 100% RTV Neutral Silicone Sealant. It is suitable for a wide range of sealing and glazing applications where durability and reliability is required. It has superior resistant to UV-Radiation, vibration and weathering. etc.It adheres to a variety of non-porous substrates such as glass, ceramic, tiles, aluminum, fiberglass, no-oily wood, polycarbonate, etc.
Rubber parts, automotive + electronic parts, washer, o ring, diaphragm, gaskets, rubber stopper, across the board, silicone & natural rubber.
Copper scrap.
Engine Oil, Lubricants, Aerosols, Silicone Sealants, Acetic Sealants, Awning Sealants, Gasket Sealants, Acrylic Sealants, Fullly Synthetic Engine Oil, Semi Synthetic Engine Oil, Pao Engine Oil, Diesel Engine Oil, Marine Engine Oil, 2t Engine Oil, 4t Engine Oil, Greases.
Production : From leaf sheath to plate is a whole process and consists of a few steps. Below the different steps are expained from harvesting the material till the disposal of the final product. 1. Harvest Areca palms leaves with the sheaths attached to it fall naturally from the trees three four times a year. By simply picking them up from the ground they are harvested.The amount of sheaths that can be collected from one tree at a time is two - three pieces. The average Areca palm plantation has around 2000 trees. One Areca sheath weights between 200g and 300g and has dimensions of 0,30 m by 1m. 2. Drying After harvest the sheaths need to be dried properly as the sheaths are prone to mold and fungus due to humidity. Normally the sheaths are dried in the open sun. However the time to dry will be approximately 6 months. For speeding up this process a Solar/ LPG drying unit will be designed. The use of an alternative form of fuel, such as LGP, makes it possible to continue production during periods of little sunlight.The dryer unit uses heated air to dry the sheaths. Also an effective drying storage facility will be designed to limit the drying time. 3. Cleaning After the drying process the sheaths need to be cleaned thoroughly in water to remove dirt and dust. This is done manually with a brush. During cleaning the sheaths will absorb water, which will make the sheaths more flexible for pressing. 4. Pressing with heat The sheaths are laid in the machines, whereas it will be pressed into the shape of the dies. These dies will be customizable to make plates of various shapes and sizes. They are heated by an external energy source and will be pressed with a certain amount of pressure, this changes the structure of the sheath particles making them fixed in their shape during pressing. A moisture content above 5% needs to be maintained during pressing or else cracks will appear in the products. Depending of the size of a sheath, multiple products can be pressed. 5. Finishing/ post cure After pressing the plates contain too high moisture content, this means that the plates need to be used immediately or need to be dried. After drying the plates can be stored up to 11 to 12 months.
Pipes, beams, plates, high tensile plates, oil gas pipes, boiler plate, mesh brc, stainless steel shafts, carbon steel plate, special design iron & stainless teel grill pipes, engineering & construction pipes..
Steel products, steel sheets, steel coils, steel plates, wire meshes, steel pipes, hollow sections, steel tubes, scaffolding, concrete reinforcement fabric, expanded metal, fencing meshes, chequered plates.
Oil and Gas products, FDA approved nitrile gloves .
Model: Super Glue Description : Super Glue is a colorless, strong, easy to use instant adhesive that bonds well both porous and non porous materials. Use for bonding of glass, plastic, metal leather concrete, fabric, etc.
Model: MS-601 MS Polymer Adhesive / Sealant Description : MS-601 is based upon Hybrid Silyl Modified Polyether Technology. It is suitable in wide range of industrial applications and it has excellent primerless adhesion to various types of substrates of dissimilar porosity, and surface textures. It also can be over painted with most of the types of paints. It is a technology that combines the unique features of Silicone and Polyurethane Sealants. It is a moisture cure system adhesive sealant and “NON” bubbling when apply in high humidity or to moist substrates. It is not suitable for structural glazing.
Model: Awning & Roofing Caulk / MC-201 Metal Roofing Sealant Description : Awning & Roofing Caulk / MC-201 Metal Roofing Sealant is a one-part skinning oil-based sealant that offers excellent adhesion and outstanding durability. For general sealing in roofing, external walls, etc.
Description : PS-202 PVC Pipe Cement Heavy Duty is a premium grade, high viscosity and clear color adhesive for PVC articles bonding applications. It is an easy-to-apply, fast setting and extra strength formulation. Suitable for waterproof bonding and coupling of rigid PVC, uPVC, cPVC and ABS pipes and fittings, cable conduits, gutters, sewer, drain, waste and vent systems, turf, irrigation and pressure pipe applications. It is safe for drinking water pipes upon complete curing. Model: PS-202 PVC Pipe Cement Heavy Duty
Model: Tremco Spectrem 2 Description : Tremco Spectrem 2 is a medium-modulus, one-part, high-performance, neutral-cure silicone sealant, ideal for a variety of perimeter caulking and glazing applications. Tremco Spectrem 2 is suitable for both caulking and glazing applications, including cap beads, toe beads, heel beads and other typical air seals. It is particularly appropriate as a weather seal and tensile bead in two-sided structural glazing system and ideal for sealing joints within the curtain wall or window systems. Tremco Spectrem 2 may be used as a weather seal for materials such as aluminum, glass, steel, painted metal, plastic, stone, concrete and brick. Tremco Spectrem 2 exhibits primerless adhesion to many common building materials.
Description : Plus Series Silver+ RTV gasket maker is specially formulated one part silicone compound that cures to form a “formed-in-place rubber seal for mechanical assemblies. it offers excellent toughness, heat resistant and able to sustain thermal cycling without shrinking or cracking.
Description : 4 Minutes Steel Epoxy is a steel filled fast setting, non shrinking gray colour epoxy adhesive. It offers good gap-filling capabilities and slumping characteristics. It will chemically bond steel, brass, copper, bronze, iron, plastic, wood, concrete and ceramics. Withstands high temperatures and is pressure resistant. Use to repair: worn valve seats, cracked housings, coppers and cylinder heads, gas tank leaks, radiator leaks, torn keyways, stripped threads, worn pulleys, loose screws, etc.
Sunflower oil, soybean, palm oil, peanuts, coffee, cocoa beans, rice, sugar, copper scrap, used cooking oil, palm kernel, palm kernel shell, corn seed, barley, coconut oil.
Welded ERW Mild Steel MS Pipe / ERW Pipes / Circular Hollow Section in various thickness & size. Size range:'' ~ 10, Thickness 1.2~9.0mm. Length: 6M, 12M or as requested. Spec: BSEN10255 / BSEN10219 / ASTM A500 or equivalent / as per requested. Grade: S195T / L275 / S275J0H or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Steel mesh for concrete reinforcement manufactured from cold-worked reinforcement bar. Size range: A142, A193, A252, A318, A393, A565 (A6~A12) Width 2.2M x Length 6M or as per requested. Specs: MS145 / SS561 or equivalent. Grade: B500A or equivalent. Note: Price is indicative only, please contact with us for further discussion on the final quotation.