DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel
paint. It is easy to apply and forms a smooth, tough paint
film which has excellent gloss, fungus resistance and
durability.
USAGE For decoration and protection. Suitable for all types of
interior and exterior metal and wood surfaces
BENEFITS High gloss and excellent gloss retention
Excellent gloss fastness
Excellent durability
Washable
PACK SIZE 1 litre, 5 litres
COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart
PERFORMANCE GUIDE
CHEMICAL RESISTANCE
Resistant to mild chemical fumes. Special paint systems
required if surface is subject to constant chemical attack
HEAT RESISTANCE
Generally resistant to heat up to 0c. Discolouration will
occur after a prolong time if surface is constantly heated
WATER RESISTANCE
Resistant to normal atmospheric humidity present. Will
withstand repeated washing. Not suitable for surface
immerse in water
THEORETICAL COVERAGE
16-18 meter2 /liter. Note: Surface coverage will alter depending on condition
of surface to be paint
PRE-APPLICATION
SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the
surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion
PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust.
RECOMMENDED PAINT SYSTEM
Types of Surface
Undercoat (1 coat) Finish (2 coats)
Wood REDWOOD white undercoat
Metal SEQUOIA
PROTECTIVE COATING OR NASA oxide
SEQUOIA 3000
GLOSS PAINT
PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint.
DRYTIME Touch dry : 2 hours
Hard dry/Recoat : 8 hours
CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal.
PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment.
Blinder : Organic Alkyd
Solvent : White spirit
Composition
Active ingredients: hydrocarbon polymer, alkyd solution and siloxane in petroleum solvent.
Appearance
Free flowing slightly milky liquid.
Packing
Available in plastic pail of 18 litres, 7 litres.
Storage
Store at normal room temperature away from sources of ignition.
Ensure containers lid are covered lightly after use.
limitations
Rainshield is designed for static weather resistance and may lessen efficiency is subjected to physical abrasion.
Warranty
5 years subject to terms and condition.
SGM uses high - performance and environmentally-friendly technology. Its water-based coating packages itself into individual capsules, allowing each to contain its own unique formula and colour. THis creates a one time multi- color spray system that is not only durable, but also effective in mirroring the authentic granite texture.
Advantages:
1. One time , multicolour spray system
2. Colours and paterns can be customized
3. Resistant to stains, fungus, algaue, acid and alkali
4. Washable and easy to maintain
5. High adhesion and anti peeling/ flaking
6. Water - based and eco-friendly
7. Excellent durability against weather conditions.
Solvent based non-toxic liquid coating for the protection of emulsion paint against damage from rain and moisture by creating a hydrophobic protective shield over the substrate paint.
