A Valve Pre-Amplifier to meet the highest standards. Inside, the 4x12AX7 and 3x12AU7 valves provide the perfect pre-amplification for weak signals. The circuitry with its negative feedback design is the optimum of linearity and sound. Gold-plated high-grade Neutrik XLR input and output connectors take the relevant cables, giving the best possible quality, and they guarantee a clean sound.
Frequency response: 20 Hz 50 kHz +/- 0.5 dB, Output voltage: 2V
Total harmonic distortion: < 0.1 % (1 kHz, 1 Watt)
Input sensitivity: 240mV, Signal-Noise ratio: > 90 dB
Input impedance: 47 kOhm, Inputs (golden): 4 x RCA, 2 x XLR NEUTRIK
Outputs (golden): 2 x RCA, 1 x RCA Rec Out, 1 x XLR NEUTRIK
Power Control Switched output voltage: 2 x Trigger 12 V (Output)
Mains supply: 230 V/50 Hz, Weight: 10 kg
Dimensions (WxHxD): 430 x 135 x 370 mm, Colour: black/silver
Tubes: 4 x 12AX7, 3 x 12AU7, double transformer
A valve Pre-Amplifier to meet the highest standards. Inside, the 4x12AX7 and 3x12AU7 valves provide the perfect pre-amplification for weak signals. The circuitry with its negative feedback design is the optimum of linearity and sound. Gold-plated high-grade Neutrik XLR input and output connectors take the relevant cables, giving the best possible quality, and they guarantee a clean sound.
Model :AV-3516(with 12V Input)
Output Power (RMS):20Wx2(4ohms)
Frequency Response:20Hz-20KHz¡À3dB
Sensitivity:250mv
S/N Ration:¡Ý85dB
Distortion:¡Ü0.5%
Dimension:120x210x300mm
NW:4kg.
Package with carton.
20378 Audio Amplifier Mixer Suppliers
Short on time? Let Audio Amplifier Mixer sellers contact you.
Model :AV-3518(headers,With 12V Input)
Output Power (RMS):250x2(4ohms)
Frequency Response:20Hz-20KHz¡À3dB
Sensitivity:250mv
S/N Ration:¡Ý85dB
Distortion:¡Ü0.5%
Dimension:120x210x300mm
NW:4kg.
Model :KA-768(USB&SD Input)
Output Power (RMS):80Wx2(4ohms)
Frequency Response:20Hz-20KHz¡À3dB
Sensitivity:250mv
S/N Ration:85dB
Distortion:¡Ü0.5%
Dimension:150x430x325mm
NW:8.5kg.
Model :tubro-609
Output power (rms):90wx2(4ohms)
Frequency response:20hz-20khz¡à3db
Sensitivity:250mv
S/n ration:85db
Distortion:¡ü0.5%
Dimension:150x430x325mm
Nw:8kg .
Model :TUBRO-709
Output Power (RMS):90Wx2(4ohms)
Frequency Response:20Hz-20KHz¡À3dB
Sensitivity:250mv
S/N Ration:85dB
Distortion:¡Ü0.5%
Dimension:150x430x325mm
NW:8kg.
Mic power amplifier :
3 mic inputs, 2 aux inputs, 1 aux output; fice led displays
70v, 100v and 4-16 ohm balanced outputs
Automatic insertion of source and mute
Separate volume control, hight/low sound adjustment
Alarm and protection in case of short circuit
Only the equipment as a pa system
PAC60Cip is the portable six phase real time simulation amplifier.This current amplifier is similar to PAC60Ci but it has lower output power and less weight.
PA30Bip is real time simulation amplifier with three-phase current and four-phase voltage.
PA30Bip-H is digital power amplifier with three-phase current and four-phase voltage. It is similar with PA30Bip but it has higher voltage output and power output.
PAV250Bip is the portable six-phase real time simulation amplifier. This voltage amplifier is similar to PAV250Bi but it has small size and less weight.
PAV120Bip is the portable six-phase real time simulation amplifier. This voltage amplifier is similar to PAV120Bi but it has small size and less weight.
Pav series four-quadrant simulation power amplifier based on linear power amplifier technology and integrated advanced technical performance and rich functions.
It is vastly used by the institutes in the area of power, new energy, aerospace, rail transport, mining, petrochemical etc.
It is also the ideal r&d device of wind power, pv, electric car, large power charging device, aerospace power system, marine power system, distribute energy, micro grid etc.
It can directly connect to the popular simulation platform.
PAC2000 amplifier is high quality linear power amplifier specially designed for power system simulation.It realized the high accuracy of the high power and high current successfully.It meets all kinds of capacitive load and inductive load.
Features
1 Channels current outputs. The output current of each channel can reach 200A RMS. The maximum output power can reach 2400VA.
PAC60Ci is the six-phase real time simulation amplifier. This current amplifier is possessed of high accuracy and fast liner response.
PA60Bi is real time simulation amplifier with three-phase current and four-phase voltage.This digital power amplifier is similar with PA30Bi but it has higher current output and power output.
PA30Bi is real time simulation amplifier with three-phase current and four-phase voltage.This digital power amplifier is similar with PA30Bi but it has higher voltage output and power output.
PA30Bi-H is digital power amplifier with three-phase current and four-phase voltage. It is similar with PA30Bi but it has higher voltage output and power output.
PAC60Ti is the six-phase real time simulation amplifier with high accuracy and fast liner response. This current amplifier can generate high power. For static status, the maximum output power can reach 600VA; for transient status, the maximum output power can be 800VA.
PAV250Bi is six-phase real time simulation amplifier. Each phase of this voltage amplifier can output 250V RMS.
PAV120Bi is a six-phase real time simulation amplifier.Each phase of this voltage amplifier can output 120V RMS.
Best application assistant for real-time digital simulation system
With around 13 various power amplifier models and countless customized solution models, ponovos power amplifier could be able to suit for different real-time simulation sysmtem application requirements.
