We offer different design linen cushion covers. Our high-quality cushion covers come in many colors (apricot, silver green, champagne, cappuchino, olive, etc.). We also fulfil customised orders. Please contact us for more details.
Haribo Pommes Sauer 100g - 10,67/box x24 Haribo Goldbren 100g - 13,06/box x30 Haribo Milchbren 175g - 17,65/box x24 Haribo Vulcano 175g - 21,77/box x30 Haribo Fruitmania Berry 175g - 21,77/box x30 Haribo Roulette 7x 175g - 23,14/box x32 Haribo Happy cola 200g - 21,77/box x30 Haribo Freche Fchse 200g - 21,77/box x30 Haribo Goldbren 200g - 21,77/box x30 Haribo Goldbren Sauer 200g - 21,77/box x30 Indicated prices refer to EXW Lithuania, transport excluded. 5 pallets are available on floor for the delivery.
larch decking, terrace boards of various measurements and profiles. Standard is 28 x 120/145 x 3000/4000/6000 mm can be with flat surface of non slip. Quality acc to GOST 8486-86
Solid european oak flooring, oak parquet and engineered flooring.
Parquet.
Hardwood floor, solid oak floor, engineered oak floor, multi-layer oak flooring, wood floor panels, wood steps..
Wooden lumbers, element furniture and floor.
Wooden flooring.
Rubber sheets, rubber tiles, rubber flooring..
Floor and terrace coverings : larch terrace boards, floorboards, outdoor and indoor paneling, construction structural wood, construction structural, calibrated and graduated timber, sawn timber.
Product Description Liquid hand sanitizer Price of product ( USD price or FOB price) : Liquid hand sanitizer Product origin : Lithuania Key Specifications/Special Features : "GCG STERIHAND, when used precisely in accordance with the instructions for use, is effective against the group of enveloped (lipophilic) viruses including the SARS-CoV-2 (2019-nCoV) virus. Active ingredients: 100g of this product contains: Ethanol 72g; Alkyl (C12-18) dimethylbenzylammonium chloride 0,1g; Alkyl (C12-C14) ethylbenzylammonium chloride 0,1g. Hygienic hand disinfection: Apply 3 ml of GCG STERIHAND onto cleaned and dried hands and rub the disinfectant until the hands are dry. Contact time: 30 seconds. The skin should be wet during the exposition. Surgical hand disinfection: Apply at least 3 ml of GCG STERIHAND onto cleaned and dried hands and forearms twice (important: the entire area to be disinfected should be covered with the solution). Contact time: 1.5 minutes. Both hands and forearms should be disinfected." Minimum Order Size and Packaging details : Packaging 100 ml, 250 ml, 1L, 5L; Minimum Order Quantity 1 Euro pallet
Logs: Soruce, Pine Timber: Soruce, Pine, Maple, Beech, Alder
We offer different design linen duvet covers. Our high-quality duvet covers come in many colors (indigo, mustard, green, baby blue, light grey, ivory, etc.). We also fulfil customised orders. Please contact us for more details.
Linen bedding, linen bedding sets, bed sets, pillow cases, duvet covers, sheets, table linen, tablecloths, napkins, runners, placements, cushion covers, throws, linen bed and table linen, european bed and table linen.
Bog oak wood, engineered flooring.
Firewood in wooden crates, firewood in net bags, pellets, briquettes, kindlings wood. firewood in big bags, variuos pallets, beams with otches, with groove, pallets collars, decks, wooden boxes, airplane pallets, cardboard pallets.Production and printing
Medical 3ply mask, 50pcs per bag 0.02/pc eur. and covid 19 tests, respirators ffp1, ffp2, ffp3, ce, iso, en. clogs, medical shoes, food industry shoes. we sale 50% laryngeal pvc masks and tracheostomy tubes with cuff..
.Insulation, plate works, marine and industrial ventilation, air conditioning, system installation, wall and ceiling system installation, flooring, installation of furniture, sanitary equipment installation, furniture for ships and offices
Advantages of panel – frame houses: Our houses are ecologic and warm, assembled fast (within couple weeks). Mounting and assembling could be done in any season; there are minimal so called wet production processes. Fast mounting does not require temporary premises or big storage rooms on a site. There is a possibility to disassemble, which is important for temporary premises. The homes could be finished by the homeowners themselves. Elements (walls, floors and roof) of wooden panel house are prefabricated and preassembled from structural panels in our specialized workshops. It allows us to achieve high quality of work, because when the works are carried out inside of premises, elements of the house are affected by unfavourable weather, it is easier to control working conditions and there are more possibilities to use special equipment. Mounting: The houses are usually mounted straight from the trucks or containers by means of a crane, which is as a rule needed for the first 2-3 days or could be even a week, if the house is bigger. Average size building fits into two – three trucks. For the assembly of a house, modern sealing materials, galvanized fasteners and anchors (for anchoring to the foundation) are used. Our houses can be mounted and assembled by other subcontractors - construction companies or even homeowners themselves. Composition of external wall panels: As a standard, gypsum plasterboard, which has a fire factor of 1 hour, or wooden cladding planks and non-flammable PE vapour barrier film are installed from the inside of wall panel. Oriented strand board (OSB) or wooden cladding planks along with the wind protection film are installed from outside of wall panels. Mineral wool insulation is preinstalled between the vertical studs inside of panels. Other compositions of walls are also possible based upon requirements set by the country code and individual. Composition of internal wall panels – partitioning and load-bearing walls:; Timber frame is made from 95÷125 mm and 145÷195 mm thickness planed off studs respectively, mineral wool insulation is preinstalled for sound isolation. Panels are covered by plasterboards or other above mentioned materials. Floor – ceiling platform: Floor is produced from panels, which are made from 60x220 or 80x220 mm cross-section beams (depending upon planned static loads). On the upper side of the panel 22mm OSB is attached to improve the stiffness. In order to achieve minimal sound isolation cavities of the platform are filled by 100 mm insulation of mineral wool and full thickness is filled near external walls. Roof construction: Roof is produced out of joists and rafters, cross-sectional dimensions of which are usually 50÷60 x 200÷220 mm. Roof beams - joists are made from glued laminated/ glulam wooden beams based on static calculations. As per customer request, where possible, we try to preassemble roof panels including attic finishing materials and roof assembly including covering materials. Structural elements of the roof can be supplied loose or preassembled as roof panels. Thermal resistance of timber frame panel houses: Depending on the chosen materials, the resistance of walls is not less than 5.00m2 K/W and the resistance of roof is not less than 6.00 m2 K/W. Usually, additional finishing of outer walls is recommended for panel houses, therefore further thermal insulation is also possible. Special installations: Heating pipes, communication lines (low current - alarm systems, internet and television) and water supply and waste water systems are usually laid inside the flooring on the basis of chosen technical system. Panelled walls are designed and construed having in mind abovementioned systems and connections. These jobs are usually done by the local skilled and authorized personnel. Facade of the house: An individual outlook for the exterior of the house could be obtained by chosen materials. External decoration of panel walls is carried out using various materials: cladding, cement, stone plates, boards, brick finishing or plastering.Upon request of a customer house set could be delivered with preinstalled windows and entrance doors, garage doors, roofing cover, external staircase, perform their installation. Price: It depends upon area of external, internal walls, floor, construction of roof, balconies, thicknesses of elements and their finishing, number of elements, scope of a project. The price for a mirror or typical project is reduced. First, we estimate the price of basic structures of the house and at the moment varies from 260 EUR to 600 EUR per one square meter of living area. In order to have the price for the complete house, you have to know what kind of: floor cover; plumbing system; type of heating system; windows material, U-value, locks, colour, opening directions, etc.; type of wood for the external (outdoor use) staircase; roofing cover and rain drainage system; external and internal decoration / finishing materials such as plasterboards or wooden cladding, etc. Final price of individual project could be estimated knowing all the details and materials, in the best case when detailed working drawing are issued and based on the latest changes an updated specification – list of materials is issued.