Sheet tile machine and produce
Forming machine Dadada
Model: gb4035 Cutting capacity: round material 350mm, square material 320x400mm Blade speed: 27, 40, 50, 71m/min Blade size : 1.1x34x4115mm Motor main output: 3kw Hydraulic power:0.37kw Coolant pump: 0.08kw Machine size: 2000x700x1200mm Client's special requirements are welcome
Model: g5330x45/150 Cutting capacity: max.Process daimeter: 300x450x1500mm Blade speed: 27, 40, 50, 71m/min Blade size : 1.1x34x3990mm Motor main output: 3kw Machine size: 2200x1200x2000mm Client's special requirements are welcome
Model: gz4230 Cutting capacity: round material 300mm, square material 300 Blade speed: 25, 50, 70m/min Blade size : 1.1x34x3730mm Motor main output: 3kw Hydraulic power:1.1kw Coolant pump: 0.08kw Machine size: 1800x1500x1350mm Client's special requirements are welcome
Model: gb42120 Cutting capacity: round material 1200mm, square material 1200x1300mm Blade speed: 12-61 m/min Blade size : 16x67x11460mm Motor main output: 15kw Hydraulic power: 2.2kw Coolant pump: 0.25kw Machine size: 5100x1950x3400mm Client's special requirements are welcome
Model: gx4030 Cutting capacity: 90 degrees 200x300mm, 45 degrees 1200x1300mm Blade speed: 18, 35, 51, 71 m/min Blade size : 1.6x54x6110mm Motor main output: 3kw Hydraulic power: 0.37kw Coolant pump: 0.085kw Machine size: 1500x1200x1100mm Client's special requirements are welcome
New & old rag tearing machines
3 knife trimmer Trimmer has been specially designed for the trimming of both hard and soft cover books. Trimmer is available in auto fed versions. In trimming station, the product registered from the spine are precisely positioned and are pressed prior to being trimmed. Special features easy access into the machine from all sides. Heavy and compact construction for high-quality trimming. Optimized cutting force and pressing capacity. Size change without exchange of parts. Safe and simple knife exchange. The trimming process The cutting knives fall at a 20 degree angle for precise and clean cuts that leaves no rough edges. Pressure from a range of 150 kg to 2000 kg applied for perfect clamping. Paper trimming are blown away by compressed air. The conveyor system The delivery belt deliver the finished booklets to the conveyor belt, keeping them in neat, aligned piles. Book-block feeder one or more book-block of up to 8 cm. In total height can be fed into the machine at one time by auto feeder. The delivery belt lifts up to carry away the finished job to the delivery belt.
High efficiency gathering solution Available in 2 different sizes, the glory gathers signatures from 35 gsm onwards. Machine can run up to 6, 000 bound books per hour with a facility of online wire stitching and rejection of bad copies. Configuration from 6 to 30 stations are possible with customisation for particular applications. Double head wire stitcher Finished book zig-zag delivery Formats Model t 310 mm x 280 mm., Model f 406 mm x 280 mm. Speed 6000 c.P.H. Paper type 35 gsm to 100 gsm 8 pages to 32 pages signatures. Block thickness Pressed - 55 mm Unpressed - 70 mm Power required 440 volts, 3 phase, 50 hz Wire stitching device (optional) Twin head for lateral wire stitching Maximum thickness for stitch 25 mm. Distance between staple Max. 370 / min.100 mm Staple crown Size - 12 mm Stitching wire size 21 to 26 no. Wire Minimum format for wire stitching 180 mm x 130 mm
Double head stitcher: The gathering and wire-stitching machine serves for the economical production of saddle-stitched brochures like magazines, TV guides, timetables catalogues, lists and similar printed matter. FUNCTIONAL GROUPS: The gathering and wire-stitching machine comprises the following functional groups: Stitching machine with two stitching heads or handling two staple sizes Counter for continuous counting of the stitched brochures Belt delivery for delivering the finished brochures in imbricated form Sheet-gathering chain with 2-6 feeding stations (optional) Drive for the connection with automatic feeders (special attachment-optional) Operation of the gathering and Wire-stitching machine, Model PEW DH2 Signatures and cover sheets are dropped on a circulating gathering chain and conveyed to the stitching station through the spine from the outside to the inside with the wire staples. The two stitching heads for stitching with two staples are arranged under a hinged guard. These can be easily set to the thickness of the material to be stitched and to changes of the distance between the staples. Two exchangeable stapling devices are supplied, one of them for thin and the other one for thicker wire-gauge. After the stitching operation, which can be performed with staggered or unstaggered position of the staples, the brochures are delivered in imbricated form on a belt delivery. Higher efficiency Auto-feeders Full utilization of the capacity of the gathering and wire-stitching machine DH2 can be achieved by connecting it with feeders operating according to the ôroll-offö principle. The gathering and wire-stitching Model DH2 can be provided upto 4 Auto-feeders. If the machine is to be used for hand feeding, the feeders have simply to be swivelled back. These feeders are also suitable for polygraph flow lines and can be attached without any modification. Technical Data Sizes (untrimmed) maximum with non-staggered stitching 350x280 mm maximum with staggered stitching 330x280 mm Minimum 150x100 mm Stapling devices A stitching thickness 0-4 mm, back length 16 mm, leg length 7 mm, for wire nos. 21-24 B stitching thickness 0-2 mm, back length 12 mm, leg length 5 mm for wire nos. 23-26 Distance between staple centres: maximum 220 mmminimum 55 mm Drive 1 kW 3-phase squirrel cage motor 400/440V, 50Hz, 1500 rpm
Flowline Stitcher The saddle stitcher SS6 Stitch Star, designed to meet the needs of modern bindery which performs with an automatic stitching line with 10 feeders and online three knife trimmer. Simple maintenance and quick make-ready of stitching heads, assured reliable and efficient production. Simple timing of gathering chain to the stitcher. Bearing supporting the gripper bar provides precise book transfer and extends gripper bar life. Maintenance-free steel capped gathering chain and chain rails Signature Feeders The feeders are designed on the basis of signature æPeel offÆ system. Alloy rollers persistently peel each signature from the pile. Each of the three rotating vacuum shafts separates the signature without friction from the pile and lays on the onveyor chain. Signatures with and without overfold can be handled. No platform required for the loading of pile. Stitching Thickness: With basic equipment max. 5 mm Trimming Thickness max. 12 mm Staple Centre Spacings With 6 stitching heads min. 65 mm...max. 450mm Stitching heads max. 6 Handles Wire Grades No. 21-28
Silca
Here, we highly recommend the most popular tissue machine, CH228 6T Facial Tissue Machine, which is the best sale among 40~50 tissue companies in the whole world. We also sell this model to several well-known tissue companies so far, like Kimberly Clerk in Brazil, Malaysia, and Argentina are our customers. Moreover, CH228 6T Facial Tissue Machine awards CE certification that demonstrates your machinists can work in security condition. You could completely believed our product reputation when you purchase and trust our product quality when you operate. At this stage, you do not need to worry about the producing produce schedule delay. The product capacity of CH228 6T Facial Tissue Machine could reach up to 3 tones weight within 8 hours, the maximum speed can be up to 120mm/ min in one working day. We have evaluated that one CH228 6T tissue machine could produce 48 artons per/min. One day product capacity is around 23,040 cartons, 691,200 tissue cartons in one month (it counts by working 8 hours/ per day). It could help you to create a great volume tissue production in a short time.
1.Cooling capacity is from 1.5kw to 2500kw; 2.Copeland, daikin, sanyo compressors; 3.Schneider electronic parts, italian water pump and steel water-tank-type evaporator; 4.Precisely control water temperature with variation of +/-1c and the temperature ranges from 5c to 50c. 5.Custom units are our specialty.
Dary.-500kl.To 100000kl. Tank. Pharma.-oll tiyp riyacatrs mob.Van.Farmantrs ani type As.Per ricwermant.
Automatic making paper box machine Feeding(paper entry)+pre-folding+bottom folding, gluing+folding+pressing Dimension:5750*1200*1200 3300*ß960*1080 Gross weight:2300kg 900kg
Technical data Thickness frames Min. Max. Mm 6-80 Width frames Min. Max. Mm 6-70 Storage capacity N. 230 V-nails size Mm 7-10-15 V-nails size on request Mm 3-4-5-12 Pneumatic feed Psl 40-80 Air consumption 3, 5 ni / 5 bar Weight Abt. Kg. 28 Height of working bench Mm130 Overall dimensions Mm 400x400x450 Desktop clips nailing
Technical data Thickness frames Min. Max. Mm 6-80 Width frames Min. Max. Mm 6-80 Storage capacity N. 220 V-nails size Mm 7-10-15 V-nails size on request Mm 3-4-5-12 Weight Abt. Kg. 50 Height of working bench Mm1000 Overall dimensions Mm 400x450x1250
Technical data Maximum cut Blade ° 350-width 80mm-height 80mm Max. Production/hour 500 / 600 cuttings Motors No. 2, 2 hp. 2800 rpm Hole suction + 80 mm Electric power supply 380 / 220 v Power absorbtion 3 kw Pneumatic feed 80 psi Air consumption 8 ni / 5 bar Weight 380 kg Dimensions 1200x1300x1750