Steel rebar, plates for ship buildings, cast iron, cast and rolled slabs, steel billets, hot rolled plates and coils sheets, general purpose hot rolled plate, cold rolled plate, galvanized cold rolled sheets and coils, seamless hot rolled pipes, straight seam welded pipes, metal scraps.
: Full fat enzyme active soy flour
: For food use: bread, breadimprover.
It improves the whitening effect, gives a longer shelf life and better emulsifying properties. Requires heating before
consumption
Ingredient statement Allergens* Full allergen
list
Organoleptic data
Appearance Colour Taste
: Soy flour.
: Soy.
: See attachment
: Powder
: Off white
: Typical
Chemical/Physical data
Particle size < 400 micron
Moisture
Ash : Min 99 % : Max. 11 % : 4,0 - 5,0 %
Nutritional data (average calculated values for this product, actual values may differ through to natural fluctuations)
Nutritional value per 100g product
Protein (N*6,25)
Fat
: 1704 KJ / 406 Kcal
: 37,8 g / 100 g
: 19,4 g / 100 g of which Saturated : 2,8 g / 100 g
Mono-unsaturated : 4,0 g / 100 g
Poly-unsaturated : 12,6 g / 100 g
Carbohydrates** Dietary fibres Sodium : 9,7 g / 100 g of which Sugars : 9,7 g / 100 g
: 20,6 g / 100 g
: 0,06 g / 100 g
Microbiological data (Under extreme harvest conditions it is possible that the maximums below are exceeded)
Total aerobic plate count Coliforms
E. Coli
Yeast & moulds
Salmonella
: < 1000000 cfu/g
: < 25000 cfu/g
: Absent in 1 g
: < 2000 cfu/g
: Absent in 25 g
GMO status : This product contains a maximum of 0,9% GM soybeans
The product, mentioned in this specification, is therefore according to EU regulations 1829/2003 and 1830/2003 free from
GMO-declaration. Our suppliers have procedures to ensure that cross contamination is prevented. This within
requirements of the mentioned EU regulations.
Country of origin : The Ukraine.
Storage conditions Shelf life
: Cool and dry in closed package
: 9 months after production date, when stored under the above mentioned guidelines.
Metal detection : 2,0 mm Ferrous 2,5 mm non-Ferrous 2,5 mm Stainless steel
Advised dosage rate : Depending on application.
Label : Printed on the package are the product name, weight, shelf life and batchnumber.
Package Max. 20 kg net. per paper bag
Custom Tariff Code : 12.08.1000
The E319 Cardboard & Plastic Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a steady stream of cardboard and plastic waste and packaging.
High compaction pressure
Electric: almost silent running 57 dB (A)
Electric: no hydraulic oil
Plug'n'Press: modern control system
Constant Pressure: Locks pressing plate in place
Safe and easy built-in bale ejection
Product Overview
The Electric E319 is a quiet-running electro-mechanical baler. Featuring a spindle-driven pressing plate, the E319 quietly compresses material with up to 15 tonnes of pressing force.Suitable for cardboard, plastic and other recyclable material, the E319 has a modern control system to start the machine and activate the pressing cycle. The pressing plate has a constant pressure feature, which locks the pressing plate in place to further compact material, without any additional electrical use. The E319 electric baler features a magnetic safety switch and inductive sensors, additionally, customized functions can easily be switched on/off. This unique construction allows for the smaller height, while still featuring a large feed opening and heavy bale weight.As it is powered by electricity, without using hydraulics, the E319 baler is suitable for locations that do not already have a source of compressed air. The lack of hydraulics mean that the E319 operates quietly, without interfering with the natural workflow, and can be located in hygiene sensitive areas. At just 1.85 metres high, the E319 electric baler has a low working height and can be installed in most locations with relative ease.
Minimize your waste of time, space and money Carries up to 150kg Eliminates all heavy lifting Stainless steel lifting plate Made of a powder-coated steel frame Multi-directional wheel base Easy transportation of compacted waste The Mil-tek Lift Trolley is the ideal assistant for a Mil-tek X-Press Compactor, eliminating any heavy lifting and making transportation of the finished waste bag both safe and easy. Instead of carrying bags to and from a skip/bin, compacted bags are simply wheeled out, winched up and pushed off. The lifting plate is manufactured from stainless steel, in order to avoid corrosion and minimize wear when used in hostile and onerous environments. The Lift Trolley is suitable for use with all XP model compactors and can also be used to transport small/medium sized bales of plastic and cardboard.
Specifications
Height (mm) : 1743
Width (mm) : 581
Depth (mm) : 778
Max. Lifting Height (mm) : 1400
Net. Weight (kg) : 50
Max. Lifting Weight (kg) : 150
Approved : CE
The E619 Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a large volume of waste cardboard and plastic packaging material.
High compaction pressure
Low: Total machine height just over 2m
Electric: quiet & free from hydraulics
Constant Pressure: Locks pressing plate in place
Easy-open: User-friendly door for simple loading
Product Overview
The Electric E619 is a high capacity electro-mechanical baler that is ideal for large volumes of waste cardboard and plastic packaging.It has a large door opening that facilitates large boxes or bags of plastic packaging, and the spindle-driven pressing plate compacts material with up to 25 tons of pressing force. Eight hooks are built into the walls of the chamber to hold compacted material in place.With a total height of just 2.07m, the E619 can be installed in most locations and, operating at approximately 65 decibels, operates relatively quietly without interrupting the working environment.The control system for the E619 electric baler is a simple and modern design. In addition, the normal pressing cycle, it can also be set to 'auto-start' or to 'constant pressure', which locks the pressing plate in place to further compact material, without additional electrical use.In accordance with EN16500 safety standards, the E619 features a magnetic safety switch, inductive sensors and additional safety elements to ensure user safety.
The New Mil-tek Xp100s Long Cylinder Waste Compactor is a Small, Stainless Steel Waste Press Ideal for Compact, Clean Locations Such as Kitchens. The Long Cylinder Increases the Level of Compaction Within a Small Footprint Area.
Long Cylinder
Fits 240 Litre Bins
Stainless Steel Frame
Small Footprint (52 Cm2)
Densely Compacted Waste
Reduced Energy Consumption
Suitable for Kitchens & Food Preparation Areas
Product Overview
The Mil-tek X-press 100 Long Cylinder Waste Compactor is a Small Size Waste Compactor Suitable for a Variety of Locations Including Kitchens, Small Cafes, Food Preparation Sites, Hospitals, Offices, and General Waste Areas.the Stainless Steel Waste Press is Small Enough to Be Installed Indoors and in Clean, Working Environments. It is Free From Oil or Other Contaminants. With a Footprint of Less Than 52cmâ², the Xp100s Waste Press Can Easily Be Added to Working Environments Such as Food Preparation Areas, Creating a Seamless Waste Disposal Process and Minimizing Any Time Wasted Transporting Waste.the Long Cylinder of the Xp100s Waste Press Compacts Waste More Densely With Each Cycle, Creating Densely Compacted Bags of Waste Up to 50 Kg in Weight. The Long Cylinder Also Uses Less Power With Each Stroke, and Can Run on as Little as 2 Bars of Pressure. Compacted Waste From an Xp100s Can Easily Be Transported Using a Mil-tek Lift Trolley. Using a Lift Trolley, Waste Bags Are Slid From the Wagon to the Lifting Plate, Winched Up and Pushed Into Waste Bins, Eliminating the Need for Heavily Lifting.
Machine Size
Height (Mm) : 1970
Width (Mm) : 670
Depth (Mm) :704
Weight : 120 Kg
Bag Height (Mm) : 600 Mm
Bag Diameter (Mm) : 450 Mm
Weight of Full Bag : <50 Kg
Material : General / Kitchen Waste
Degree of Compression : < 90%
Noise Level : < 70 Db(a)
Pressure : 1500 Kg at 5 Bar
Approvals : Ce, as/nz 4024.1
Set Price : 4680.00 Eur
In Set Included:
Xp100s Compactor
1 Box Bags 100l (100 Pcs./box)
1000 Pcs.wire Ties
Wire Tie Twister/strapper
Optional : Ompressor Mt1 B Hd :925.00 Eur
Extra Bags, 100l, 5 Boxes (500 Pcs. ) : 245.00 Eur
Product Description
Our focus is on wooden components, not bigger than 500x500x500 mm We have assembling service available - manual or automatic assembly of our components with Your components. Spare parts kits, other manual operations.
Price of product ( USD price or FOB price) :
Each customer and product has its own price.
Because each order is individual.
We provide all the highest quality and delivery of products.
Product origin :
Spare parts kits, other manual operations.
Key Specifications/Special Features :
Manufacturing of wooden components
Milling, turning, laser cutting, engraving, wood forming, plywood forming. Each customer and product has its own price.
Because each order is individual.
We provide all the highest quality and delivery of products.
Key Specifications / Special Features
Engineering network, drawing, design, production, delivery
Minimum Order Size and Packgaing details :
You can order one product or a full container. Package:
Wooden box.
Cardboard box
Special plastic packaging.
Vacuum packaging
Source: Artesian water well
Certificates: QS, HACCAP
Shelf Life: 24 month
Weight (kg): 1
Volume (L): 1
Place of Origin: Latvia, European Union
Brand Name: Kekavas
Model Number: Kekavas 1L
Packaging: PET Plastic Bottle
Kekavas (Can also be as PRIVATE LABLE)
Source: Artesian water well
Certificates: QS, HACCAP
Shelf Life: 24 month
Weight (kg): 1.5
Volume (L): 1.5
Place of Origin: Latvia, European Union
Brand Name: Della or Kekavas or Private Label
Model Number: Della Artesian 1.5L
Packaging: PET Plastic Bottle
We are producing any products and constructions from steel, like warehouses, markets, docks, showcases, shelves etc...
We are producing according to your needs and also installing them. If you are interested we have sample pictures from out jobs. Our company and products have all certificates and permits. Waiting for your soon reply.
