The E319 Cardboard & Plastic Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a steady stream of cardboard and plastic waste and packaging. High compaction pressure Electric: almost silent running 57 dB (A) Electric: no hydraulic oil Plug'n'Press: modern control system Constant Pressure: Locks pressing plate in place Safe and easy built-in bale ejection Product Overview The Electric E319 is a quiet-running electro-mechanical baler. Featuring a spindle-driven pressing plate, the E319 quietly compresses material with up to 15 tonnes of pressing force.Suitable for cardboard, plastic and other recyclable material, the E319 has a modern control system to start the machine and activate the pressing cycle. The pressing plate has a constant pressure feature, which locks the pressing plate in place to further compact material, without any additional electrical use. The E319 electric baler features a magnetic safety switch and inductive sensors, additionally, customized functions can easily be switched on/off. This unique construction allows for the smaller height, while still featuring a large feed opening and heavy bale weight.As it is powered by electricity, without using hydraulics, the E319 baler is suitable for locations that do not already have a source of compressed air. The lack of hydraulics mean that the E319 operates quietly, without interfering with the natural workflow, and can be located in hygiene sensitive areas. At just 1.85 metres high, the E319 electric baler has a low working height and can be installed in most locations with relative ease. Machine size Height (mm) : 1855 Width (mm) : 1165 Depth (mm) : 770 Weight ; 500 kg Bale size : Height (mm) : 800 Width (mm) : 500 Depth (mm) : 900 Bale weight : Plastic:
The E619 Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a large volume of waste cardboard and plastic packaging material. High compaction pressure Low: Total machine height just over 2m Electric: quiet & free from hydraulics Constant Pressure: Locks pressing plate in place Easy-open: User-friendly door for simple loading Product Overview The Electric E619 is a high capacity electro-mechanical baler that is ideal for large volumes of waste cardboard and plastic packaging.It has a large door opening that facilitates large boxes or bags of plastic packaging, and the spindle-driven pressing plate compacts material with up to 25 tons of pressing force. Eight hooks are built into the walls of the chamber to hold compacted material in place.With a total height of just 2.07m, the E619 can be installed in most locations and, operating at approximately 65 decibels, operates relatively quietly without interrupting the working environment.The control system for the E619 electric baler is a simple and modern design. In addition, the normal pressing cycle, it can also be set to 'auto-start' or to 'constant pressure', which locks the pressing plate in place to further compact material, without additional electrical use.In accordance with EN16500 safety standards, the E619 features a magnetic safety switch, inductive sensors and additional safety elements to ensure user safety. Machine size Height (mm) : 2070 Width (mm) : 1915 Depth (mm) : 960 Weight : 1212 kg Bale size Height (mm) : 800 Width (mm) : 1500 Depth (mm) : 800 Bale weight : Plastic:
Original smart phones.
Fishing nets.
Steel component, milling, turning, drilling, stamping, bending, deep drawing, welding, laser cutting, laser engraving, forming, casting operations, stainless steel, non ferrous steels (aluminium, messing, copper) and specific parameters, like hardox, inconel materials,plastic component,rubber component,spring, manufacturing of steel components. milling, turning, drilling, stamping, bending, deep drawing, welding, laser cutting, laser engraving, forming, casting operations. our focus is on stainless steel, non ferrous steels (aluminium, messing, copper) and specific parameters, like hardox, inconel materials manufacturing of plastic components. plastic molding operations, 3d printing technology, also milling and turning operations. our focus is on plastic details, not bigger than 500x500x500 mm manufacturing of wooden components, milling, turning, laser cutting, engraving, wood forming, plywood forming. our focus is on wooden components, not bigger than 500x500x500 mm.
Ideal for small, indoor environments, Mil-tek X-Press compactors are tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1. 10:1 compaction Improves security and safety Low on noise, low on energy Air-powered, clean and hygienic Fixed frame unit & sliding wagon Suitable for kitchens & offshore environments Compact general, kitchen and hazardous waste Product Overview The Mil-tek X-Press 300 waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 300 waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. The fixed frame unit and sliding wagon allows the X-Press 300 to be securely bolted in place making it ideal for shipping, offshore environments or uneven surfaces.The Mil-tek X-Press 300 compactor is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 300 is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination. Machine size Height (mm) : 1850 Width (mm) : 670 Depth (mm) : 1155 Weight : 107 kg Bag height (mm) : 600 Bag diameter (mm) : 450 Weight of full bag :
Ideal for small spaces and indoor environments, the X-Press 200S compactor is tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1. Stainless steel 10:1 compaction Improves security and safety Low on noise, low on energy Air-powered, clean and hygienic Suitable for kitchens & offshore environments Product Overview The Mil-tek X-Press 200S stainless steel waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 200S waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. You also reduce the number of bins and collections by 80%, reducing the cost and improving the internal logistics and productivity of your organisation.A compaction ratio of up to 10:1 has a significant impact on waste costs by reducing number of waste containers and frequency of hauls.The Mil-tek X-Press 200S is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 200S is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination. Machine size Height (mm) : 2025 Width (mm) : 810 Depth (mm) : 779 Weight : 150 kg Bag height (mm) : 600 Bag diameter (mm) : 570 Weight of full bag :
Ideal for small, indoor environments, Mil-tek X-Press compactors are tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1. 10:1 compaction Improves security and safety Low on noise, low on energy Air-powered, clean and hygienic Compact general and hazardous waste Suitable for kitchens & offshore environments Product Overview The Mil-tek X-Press 200 waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 200 waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. You also reduce the number of bins and collections by 80%, reducing the cost and improving the internal logistics and productivity of your organisation.A compaction ratio of up to 10:1 has a significant impact on waste costs by reducing number of waste containers and frequency of hauls.The Mil-tek X-Press 200 compactor is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 200 is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination. Machine size Height (mm) : 1825 Width (mm) : 830 Depth (mm) : 800 Weight : 135 kg Bag height (mm) : 600 Bag diameter (mm) : 570 Weight of full bag :
Delivery time The machine will be delivered within 25 working days. Price : 517 000.00 EUR Basic Parameters Model S4020 Working area (mm) 4000mm*2000mm Laser power (kW) 20 Laser source MAX Format support Beckhoff CNC code file/ G code Positioning accuracy (mm) 0.05 Re-positioning accuracy (mm) 0.03 Z axis travel (mm) 135 Max. Acceleration (G) 4.0 Max. Linkage speed (m/min) 200 Max. Workpiece weight (kg) 4,835 Machine size (mm) 15500*4200*2400mm Machine weight (kg) 18,500 Total power capacity/current 68VA/103A 2 FUNCTION Intelligent function Time savings One-click processing Bodor Lightning perforation technology High Speed Cutting Expert Database Automatic Edge-finding Automatic nozzle changer Automatic nozzle cleaning Intelligent remainder sheets cut-apart Touchscreen Display Automatic adjustment of cutting gas pressure Auto-focus of laser head 3 Laser cutting technology expert database Ergonomic Remote Control (Bodor Mango) Quality cutting Active anti-collision function intellgent over-heat adaptation start-up melted slag clean High quality Cutting Expert Database Real-time monitoring of laser head temperature Nozzle cooling Cost savings Constant Cutting Gas Pressure Gas-saving steady flow nozzle Intelligent maintenance reminder Service WIFI internet connection Bodor cloud sevice Configurations 1. 20 KW MAX laser source 2. Germany Precitec laser cutting head 3. Germany Beckhoff control system 4. Lantek Nesting software 5. Cast iron machine bed 6. Triangular type ultrahigh pressure honeycomb aluminum gantry 7. Automatic nozzle changer 8. MANGO handle 9. 21.5-inch touch screen 10. Germany Beckhoff servo motor and driver 11. Germany Rexroth slideway and gear 12. Germany STOBER reducer 13. Schneider electric relay and breaker from France 14. Switzerland ABB Frequency converter 15. Switzerland CARLO GAVAZZI Switching power/current supply 16. America Parker control valve for N2 17. Germany Phoenix Terminal 18. Active obstacle avoidance function 19. Automatic lubrication 20. WLAN control 21. Automatic pressure control function for O2 - N2air 22. Process monitoring 23. Pierce Monitor 24. Closed-loop pressure control 25. Lighteye Edge Searching 26. Unbounded Cutting 27. Vortex Start 28. CE certificate 29. Laser fault alarm 30. Cooler fault alarm 31. Laser protective glasses 32. Electron microscope 33. Water chiller
Office chairs, special ergonomic chairs, hotel chairs, living room chairs, medical practice chairs.
Hello, we are international Company from Latvia who can supply aluminium windows and doors, sizes etc as per your requests.
Wooden cabins, wooden tables.
Doors.
Oak, lamella, flooring.
