Soybean meal, canola meal, sunflower meal, meal, flour, fertilizers, amino acids, fuel pellets..Ship, cargoes
We offer Refined Sunflower oil, Loading: 40 feet containers, boxed, in bottles.
Granular complex NPKSB 14-23-14-5-1, 12-20-14-5-1 or any other produced by bulk blending on buyers request. 50 kg PP/PE bags.
Soya meal, sunflower pellets, wood pellets..
Granular NPK 16-16-16 min., chemical compound, contains Nitrates N, packed into PP/PE sacks 50kg net, closed by sewing, printed buyers markings, delivered by sea containers CFR buyers port(s).
Granular NPK 15-15-15 min., chemical compound, contains water soluble Sulphur , addition of TE on Buyers request. Delivered in bulk or packing by vessel or sea containers CIF Buyers Port/Doors
Fertilizers, wheat grain, rape seeds, sunflower seeds.
NPK, NPKs and NPKSB fertilizers.
Granular ammonium sulphate, ammonium nitrate, npk combined fertilizers, nitrogen, phosphour fertilizers: dap, map, urea prill, urea granular, crystal, can n27.
• full coverage bra • underwire for support • adjustable bra straps for comfort • hook-and-eye back closure • hand wash, line dry • 80% polyamide, 5% cotton, 15% elastane • brand: loretta lingerie Parcel of 100 units ~ 10kg
Ideal for small, indoor environments, Mil-tek X-Press compactors are tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1. 10:1 compaction Improves security and safety Low on noise, low on energy Air-powered, clean and hygienic Fixed frame unit & sliding wagon Suitable for kitchens & offshore environments Compact general, kitchen and hazardous waste Product Overview The Mil-tek X-Press 300 waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 300 waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. The fixed frame unit and sliding wagon allows the X-Press 300 to be securely bolted in place making it ideal for shipping, offshore environments or uneven surfaces.The Mil-tek X-Press 300 compactor is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 300 is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination. Machine size Height (mm) : 1850 Width (mm) : 670 Depth (mm) : 1155 Weight : 107 kg Bag height (mm) : 600 Bag diameter (mm) : 450 Weight of full bag :
The E319 Cardboard & Plastic Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a steady stream of cardboard and plastic waste and packaging. High compaction pressure Electric: almost silent running 57 dB (A) Electric: no hydraulic oil Plug'n'Press: modern control system Constant Pressure: Locks pressing plate in place Safe and easy built-in bale ejection Product Overview The Electric E319 is a quiet-running electro-mechanical baler. Featuring a spindle-driven pressing plate, the E319 quietly compresses material with up to 15 tonnes of pressing force.Suitable for cardboard, plastic and other recyclable material, the E319 has a modern control system to start the machine and activate the pressing cycle. The pressing plate has a constant pressure feature, which locks the pressing plate in place to further compact material, without any additional electrical use. The E319 electric baler features a magnetic safety switch and inductive sensors, additionally, customized functions can easily be switched on/off. This unique construction allows for the smaller height, while still featuring a large feed opening and heavy bale weight.As it is powered by electricity, without using hydraulics, the E319 baler is suitable for locations that do not already have a source of compressed air. The lack of hydraulics mean that the E319 operates quietly, without interfering with the natural workflow, and can be located in hygiene sensitive areas. At just 1.85 metres high, the E319 electric baler has a low working height and can be installed in most locations with relative ease. Machine size Height (mm) : 1855 Width (mm) : 1165 Depth (mm) : 770 Weight ; 500 kg Bale size : Height (mm) : 800 Width (mm) : 500 Depth (mm) : 900 Bale weight : Plastic:
The New Mil-tek Xp100s Long Cylinder Waste Compactor is a Small, Stainless Steel Waste Press Ideal for Compact, Clean Locations Such as Kitchens. The Long Cylinder Increases the Level of Compaction Within a Small Footprint Area. Long Cylinder Fits 240 Litre Bins Stainless Steel Frame Small Footprint (52 Cm2) Densely Compacted Waste Reduced Energy Consumption Suitable for Kitchens & Food Preparation Areas Product Overview The Mil-tek X-press 100 Long Cylinder Waste Compactor is a Small Size Waste Compactor Suitable for a Variety of Locations Including Kitchens, Small Cafes, Food Preparation Sites, Hospitals, Offices, and General Waste Areas.the Stainless Steel Waste Press is Small Enough to Be Installed Indoors and in Clean, Working Environments. It is Free From Oil or Other Contaminants. With a Footprint of Less Than 52cmâ², the Xp100s Waste Press Can Easily Be Added to Working Environments Such as Food Preparation Areas, Creating a Seamless Waste Disposal Process and Minimizing Any Time Wasted Transporting Waste.the Long Cylinder of the Xp100s Waste Press Compacts Waste More Densely With Each Cycle, Creating Densely Compacted Bags of Waste Up to 50 Kg in Weight. The Long Cylinder Also Uses Less Power With Each Stroke, and Can Run on as Little as 2 Bars of Pressure. Compacted Waste From an Xp100s Can Easily Be Transported Using a Mil-tek Lift Trolley. Using a Lift Trolley, Waste Bags Are Slid From the Wagon to the Lifting Plate, Winched Up and Pushed Into Waste Bins, Eliminating the Need for Heavily Lifting. Machine Size Height (Mm) : 1970 Width (Mm) : 670 Depth (Mm) :704 Weight : 120 Kg Bag Height (Mm) : 600 Mm Bag Diameter (Mm) : 450 Mm Weight of Full Bag :
Ideal for small spaces and indoor environments, the X-Press 200S compactor is tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1. Stainless steel 10:1 compaction Improves security and safety Low on noise, low on energy Air-powered, clean and hygienic Suitable for kitchens & offshore environments Product Overview The Mil-tek X-Press 200S stainless steel waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 200S waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. You also reduce the number of bins and collections by 80%, reducing the cost and improving the internal logistics and productivity of your organisation.A compaction ratio of up to 10:1 has a significant impact on waste costs by reducing number of waste containers and frequency of hauls.The Mil-tek X-Press 200S is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 200S is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination. Machine size Height (mm) : 2025 Width (mm) : 810 Depth (mm) : 779 Weight : 150 kg Bag height (mm) : 600 Bag diameter (mm) : 570 Weight of full bag :
Ideal for small, indoor environments, Mil-tek X-Press compactors are tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1. 10:1 compaction Improves security and safety Low on noise, low on energy Air-powered, clean and hygienic Compact general and hazardous waste Suitable for kitchens & offshore environments Product Overview The Mil-tek X-Press 200 waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 200 waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. You also reduce the number of bins and collections by 80%, reducing the cost and improving the internal logistics and productivity of your organisation.A compaction ratio of up to 10:1 has a significant impact on waste costs by reducing number of waste containers and frequency of hauls.The Mil-tek X-Press 200 compactor is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 200 is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination. Machine size Height (mm) : 1825 Width (mm) : 830 Depth (mm) : 800 Weight : 135 kg Bag height (mm) : 600 Bag diameter (mm) : 570 Weight of full bag :
High quality sifted Soil, we have more than 500,000 cubic metres for digging. Price negotiable. Contact for more details.
Wheat, Yellow Corn, Grains, Soybeans, Soybean Meal, Hay, Wood Chips.Sourcing Agents
