Hplasii urology diode laser system 980nm & 1470nm For benign prostatic hyperplasia (bph) Safe, effective and minimally invasive treatment for soft tissue urological procedures: . Benign prostate hyperplasia (bph) . Removal of cysts . Stenosis of the urethra and of the ureter Gigaalaser, after development the hplas 980nm, combines the two parallel working wavelengths of 980nm and 1470nm to introduce a totally newproduct hplasii for urology. Principle od treatment The treatment commences by inserting the cystoscope containing our new bph probe through the urethra. The head of the bare fibre is pushed our of the probe. The dual laser of 980nm and 1470nm is discharged from the probe head. The operator steers the probe, rotating it to ablate the tissue in a circular motion. The funnel grows large step by step and the bph probe is withdrawn from the prostate at the end. Urine can once agian flow off freely. Technical specifications . Wavelength: 980nm+1470nm . Laser output power:150w+40w . Output modes: continuous and pulsed . Pulse duration: 100ms-1s . Transmission system: 600um-1000um side-fire or bare fiber with sma 905 connector . Aiming beam: 635nm-5mw . Control mode: true color touch screen . Vlotage/current rating: 110v/220v, 50/60hz Donna(at)gigaalaser.Com 0.00
1) the double ball screw closed-loop system and usa. Open pmac system enable high processing accuracy and efficiency 2) standard collocation of 500w/1000w/2000w fiber laser generator realize low operation and maintenance cost and maximum long-term investment returns and profit 3) enclosed design meet ce standard.Pallet table is convenient for material uploading and unloading, improve efficiency 4) aiming at high speed cutting, we design and manufacture strengthened welded machine body after 2 times of aging process which ensures long-term accuracy and stability of performance 5) standard collocation of dual-pressure gas control system of 3 gas sources(high pressure air, nitrogen, oxygen)meets the processing requirement of all kinds of materials. 6) standard collocation of automatic nesting software(including material management and optimized processing technology) and database of process parameters is provided for easy operation and simple management 7) optimized optical lens, specially designed nozzle and sensor technology realize smooth and stable cutting 8) worktable is 1500mm*3000mm, optional 2000mm*4000mm, 2000mm*6000mm. 9) can cut mild steel 0.5mm -15mm, stainless steel 0.5mm-10mm Standard machine export package or per customer's requirements.
1) the double ball screw closed-loop system and usa. Open pmac system enable high processing accuracy and efficiency 2) standard collocation of 500w/1000w/2000w fiber laser generator realize low operation and maintenance cost and maximum long-term investment returns and profit 3) enclosed design meet ce standard.Pallet table is convenient for material uploading and unloading, improve efficiency 4) aiming at high speed cutting, we design and manufacture strengthened welded machine body after 2 times of aging process which ensures long-term accuracy and stability of performance 5) standard collocation of dual-pressure gas control system of 3 gas sources(high pressure air, nitrogen, oxygen)meets the processing requirement of all kinds of materials. 6) standard collocation of automatic nesting software(including material management and optimized processing technology) and database of process parameters is provided for easy operation and simple management 7) optimized optical lens, specially designed nozzle and sensor technology realize smooth and stable cutting 8) worktable is 3000mm*1500mm, 9) can cut mild steel 0.5mm-15mm & stainless steel 0.5mm-10mm Standard machine export package or per customer's requirements
1) the double ball screw closed-loop system and usa. Open pmac system enable high processing accuracy and efficiency 2) standard collocation of 500w/1000w/2000w fiber laser generator realize low operation and maintenance cost and maximum long-term investment returns and profit 3) enclosed design meet ce standard.More reliable and safe 4) aiming at high speed cutting, granite base is used to meet high precision and stable performance 5) standard collocation of dual-pressure gas control system of 3 gas sources(high pressure air, nitrogen, oxygen)meets the processing requirement of all kinds of materials. 6) standard collocation of automatic nesting software(including material management and optimized processing technology) and database of process parameters is provided for easy operation and simple management 7) optimized optical lens, specially designed nozzle and sensor technology realize smooth and stable cutting 8) worktable is 1300mm*900mm, 9) can cut mild steel 0.5mm-15mm & stainless steel 0.5mm-10mm Standard machine export package or per customer's requirements.
Product introduction: Performance features of lcf optical fiber series laser cutting machines 1. Fiber laser device imported 2. Prominent beam quality: smaller focusing speckle 3. 30% photoelectric transformation efficiency green Application industries It is applicable to different kinds of metalwork processing industries like sheet-metal processing, advertising, laser processing service etc. Applicable materials It is mainly used in quick cutting of various metal materials like carbon steel, silicon steel, stainless steel, titanium alloy, galvanized sheet, pickling boards etc. Model Fiber-aga3015/300w/500w/1000w Laser type Imported optical fiber conduction laser device Size 1500mm x3000mm Laser power 300w, 500w, 1000w Driving mode I mported lead screw servo, guide rail Laser wavelength 1064nm Max cutting(c.S) 10mm Max movement velocity 20000mm/min Dimension accuracy ¡à0.06mm/min Position accuracy ¡à0.02mm/min Repeated positioning precision ¡à0.015mm/min Min line width 0.05mm Power requirement 380v/50hz Cooling mode Air cooling Graphed file format Plt, dxf, g code
15W/30W/60W Surgical Diode Laser Systems The VELAS series from GIGAA LASER offer you a multiple choice for your different clinic requirements. Surgical applications require a technology that offers equally effective ablation and coagulation options. The VELAS series will offer you the wavelength options of 810nm, 940nm, 980nm and 1470nm, so that you could choose a laser which suits your need best. The laser systems involve in Urology, EVLT, ENT, Dental, Gynecological, Orthopedic, Plastic surgery and other areas. Each year, we develop at least one new laser system, to bring the new technology and application, safety and health for the patients. Lipolysis Laser lipolysis is the latest technology in fat reduction,which uses laser to dissolve fat, the cell membranes are broken up during this process. The thin fat lysate is released and it is either resorbed naturally or extracted manually by suction.The compatible operation kits for lipolysis by GIGAA LASER will provide a wide range of applications in body and a total new experience for patients. PLDD(Percutaneous Laser Dsic Decompression) Percutaneous laser disc decompression is the use of laser thermal effect and prominent vertebral Vaporization of disc nucleus and form part of the space, reducing the pressure inside the disc, eliminating the oppression of the nerve, which achieve the purpose of treatment. The therapeutic method of the laser treatment for PLDD. ENT(Ear, Nose and Throat) Dacryocystorhinostomy (DCR) Turbinectomy Nasal polypectomy Tonsillectomy Glossectomy Endo sinus surgery Stapedectomy Dentistry Internal decontamination General surgery (cutting) Therapy Tooth whitening Surfaces of teeth gingivectomy Phlebology/Endovenous Laser Treatment Great saphenous vein Small saphenous vein Perforating vein Main Advantages * Based on the experienced R.D, administration team, Gigaalaser Focuses on the medical diode laser system and accessories for application in a wide range of medical specialties. * Using the perfect Chinese resource industry, we provide the high quality and the cost effective new type medical laser systems to the clients all over the world. * New friendly used protocol * Big color touch screen * Output power calibration at the end of fibers * Highly integrated and modular design * New design inside to make maintenance easy and low cost * High quality and reliability Technical Parameters: . Wavelength: 810/940/980/1470nm . Laser output power: 15/30/60w . Output modes: CW, Single or Repeat Pulse . Pulse Duration: 10us-3s/10ms-3s . Transmission System: Fibers of 200um, 400um and 600um with SMA 905 connector(200um only could be used on VELAS15B) . Aiming Beam: Red Diode Laser of 635nm, power less than 5mW . Control mode: true color touch screen . Vlotage/Current rating: 110V/220VAC, 5A, 50/60Hz or 110VAC/5A, 220VAC/10A, 50/60Hz . Dimensions: 400(W)X385(L)X200(H)mm . Weigth: 12.9Kg/13.4Kg
Auto level foif 24x +tripod+leveling staff 5m with warranty 5 years And calibration certificate only 250 usd Also we have all surveying instrument(auto level-thedolite-total stahion-laser level-distance mater) Now, with confidence announce the possibility of delivery all types of our products to all over the world during the period of not more than one week only.
The medical application of CO2 laser is based on the principle of Photo-thermal Ablation. Once the CO2 laser is delivered to the soft tissue, the light energy is absorbed by the water inside the biological soft tissue. By heating up and vaporizing the water, the biological tissue is torn apart. In order to minimize heat convection to surrounding tissue and collateral heat damage, the duration of the laser beam on the tissue can be controlled under 1 ms. The CO2 laser system delivers an intense infrared light beam with 10600 nanometers wavelength which can be absorbed by body tissue (no matter what color the skin is) almost by 100%. This specific wavelength has a dramatic effect to biological soft tissue. Our CO2 surgical laser system uses state-of-the art technologies and is designed to cut, vaporize, burn, and solidify tissue for different clinical surgery procedures. At the same time our laser system uses controlled pulses of light to precise ablate, cut or remove target tissue by vaporizing tissue. It has been proven to be reliable and easy to operate and it is totally different from traditional surgical tool. Application: Dermatology : The double-eyelid, eye surgery, face and other parts of the grinding wrinkles, the grinding of a variety of scars, pigmentation of the hair transplant surgery hemorrhoids, warts, freckles, and tumor. ENT: rhinitis, turbinate hypertrophy, nasal polyps, pharyngitis etc. Dental : leukoplakia, glandular cheilitis, mucinous cyst, sublingual gland cyst. Gynecology : cervical erosion, cervical polyp, cyst. Surgery : external hemorrhoids, anal fistula, circumcision, genital warts, underarm odor, etc. Physiotherapy : cervical spondylosis, frozen shoulder, ulcers. Features: *True LCD touch screen micro-computor control system,user-friendly design,easy for operation. *SFDA & CE medical * Steady and stable Laser Beam Quality * User-friendly Graphic Interface * Safety protection with automatic alarm * 360 degree rotation with 7-joints articulate arm * Micro-computer control,high definition of laser beam Technical Specifications:1. Laser TypE:Pco15-bc02(sealed off) 2. Wave Length: 10600nm 3. Laser Mode: Low-order modes 4. Output Power: 1~30w. cont. Adjustable 5. Laser Operation Modes: CW, Single Pulse, Repeat Pulse, Ultra Pulse 6. Tissue Exposure Modes: Continuous, Single Pulse, Repeat Pulse, Pulse 7. Ultra-pulse Frequency: 10~990Hz, Ultra-pulse Duration: 0.1~1.7ms 8. Continuous, time, repeated pulse 0.05, 0.1, 0.2, 0.5s 9. Aiming Beam: 5 mW 670nm Diode Laser (Light adjustable) 10. Beam Delivery System: 7- joint Spring- Balanced Articulated 11. Cooling system :Sealed of water circulation system 12. Control System: Microprocessor Controlled 13. Smoke Emission Smoke-blowing system inside 14. Operating Control Footboard switch 15. Input Power: 110V AC/ 60Hz or 220V AC/ 50Hz. wooden box
Feature: 1Modular design (Laser device module, light scanning module, computer controller module, control box module, laser power module, Q switch power module, cooling system module) each module own independent running space, easy to direct-connect and reduce interruption caused by electromagnetic and hot temperature, ensue the system running long time stably. 2Super prcised light cavity design Professional laser resonance cavity designing ensure high laser output frequency and best laser model, and reduce the dependence to the temperature. 3Flexible control method All control module own two control mode ( hand adjustment and program-control adjustment), which can satisfy different customer needs. Refer to marking electric current, frequency and related parameter, you could adopt the method of hand adjustment. 4light route preview function, focus indication function Add visible red light in the laser light bearing to indicate the position of laser beam, could reach the function of preview to the marking area. Add indicated focus red light, more easy to reach focus function. 5Multi-function marking software Strong picture-drawing and editing function. Auto-linking to selected object, and easy to operation and view. Support Truetype font, single line font, single dimension bar code and two dimension bar code. Support 256 pens, and could set different processing parameter for different object. Basic Technical Parameter: Model WYDP50 /WYDP75 Laser Medium Nd:YAG Laser power 50W/75W Laser wavelength 1064nm Repeated frequency 50KHZ Marking area 110mm Marking depth1.0mm Marking speed\7000mm/s Min marking width 0.04mm/0.05mm Min Character 0.2mm/0.3mm Repeated Precision 0.005mm Complete machine Max. Power 1.5KW/2.0KW Power supply 220V/single phase/50HZ/15A Working environment Temperature 5-28 degree, Humidity
1470nm 810nm/980nm. 400(w)*385(l)*200(h)
The model Dw-co2-80w-9060-a Working area 900mm*600mm Laser power 80w Laser type Reci hermetic co2 glass tube Guide rails Taiwan imported linear guide rails Control system Dsp industrial control system Working table Aluminum platform Drive system Japan imported step motors Lens Imported focus lens and mirrors Positioning accuracy 0.01mm Cutting speed 1~1500mm/min Engraving speed 1~3000mm/min Cooling way Water cooling and production system Graphic format supported Bmp, gif, jpeg, dwg, psd, tiff, plt, cdr, dmg, Compatible software Coreldraw, photoshop, autocad Interface Usb Application computer system Windows 2000/windows xp/windows7 Cutting thickness 0-15mm(depends on different material) Optional Equipe with rotary device, industrail chiller cw3000 Worktable Electric up-down worktable max distance 500mm Applicable materials Non-metal materials such as acrylic, double color board, plexiglass, leahter, fabric, paper, hair felt.Carpet, Common glass, bamboo and wood, rubber, pvc, polypropylene, marble, granite and tiles, leather cloth etc. Applicable industries: Advertising industry, billboards, artistic gifts, crystal ornaments, paper-cut, bamboo, home design decorate industry, And wooden product, garment and leather, embroidery, decoration and upholster industry. Packing Plywood case Machine dimension L1450mm*w950mm*h1100mm Packing size 1680mm*1200mm*1250mm Net weight 210kg Gross weight 285kg
Laser tube type Sealed co2 laser tube Laser power 60w /40w Engraving area 600 x400mm Whole machine size 1, 330 x 810x 1075mm Engraving speed 0 - 72, 000mm/min Repositioning accuracy ¡à0.1mm Power supply Ac 110 - 220v0%, 50 - 60hz Gross power
This modle can be desiged according to customer needs . High configuration ballscrew model can be built up to350mm, the gantry tends to tremble beyong that height , while gearwheel models can be maximam 500mm to ensure overall stability. X.Y work area: 1200x1200mm. Z axis :350mm. Special made by order . Performance parameter,Mt-cr1208 Spindle roating speed,0-24000rpm Power,220v-50hz Max feeding,25m/min Work holding,By suction Spindle rate,2.2kw(water cooling) Drive moter,Stepper motor Interface,Usb Power(not include the spindle),3kw Resolution ratio,0.005mm Reposition precision,0.05mm Operation code,G code Dust collector,Yes
Specifications Maximum laser power: 12w Laser wavelength: 1064nm Beam quality m2: < 2.5 Q-switch frequency: 100khz Minimum q-switch laser pulse width: 25ns The largest q-switch peak laser power: 100kw Standard engraving range: 110x110mm / 200x200mm Minimum line width: 0.01mm Repeat accuracy: 0.001mm Total power: 2kw The demand for electricity: 220v 22v/50hz/10a.
Technical parameters: Maximum laser power: 10w Laser wavelength: 10.64¦ìm Laser repetition frequency: 50 khz Standard engraving range: 110mm110mm Engraving depth: 5mm Engraving line speed: 7000mm / s Minimum line width: 0.1mm Minimum characters: 0.4mm Repeat accuracy: 0.01mm Total power: 0.6kw The demand for electricity: 220v / single phase / 50hz / 3a.
Technical parameters: Maximum laser power: 30w Laser wavelength: 10.64ìm Laser repetition frequency: 50khz Standard engraving range: 110mm110mm Engraving depth: 5mm.
Specifications Laser-pumped mode: lamp-pumped Laser wavelength: 1064nm Laser frequency: 0-50khz Laser power: 50w Q-switch mode: acoustic-optic q-switch Pulse width: 20ns Beam quality: m2 < 10 Maximum carving speed points /s: 7000mm/s Standard engraving range (mm): 100 100 Laser head number: 1 Focal length: 100mm Focus diameter: 0.05mm Minimum marking characters: 0.3mm Cooling method: water-cooled Easy-wearing parts: kr lamp Easy-wearing parts usage time: 800 hours Applicable materials: metal and some non-metallic materials Input power: ac380v 10% 50-60hz Equipment power: 5kw The software: english and chinese marking software Engraving accuracy: 0.005mm Repeat accuracy: 0.005mm
Maximum laser power: 50w Laser wavelength: 1064nm Beam quality m2:
Pentagon rf co2 fractional laser for skin rejuvenation, scar removal etc. With hand held scanner for fractional use., and also with focused hand piece, normal laser surgery.
Pentagon rf co2 fractional laser with hand held scanner for skin rejuvenation, scar removal etc.
