Programmable Temperature and Humidity Testing Machine are the necessary test equipment for aircraft industry, automobile industry, home appliance industry and scientific research field, it can be used to test and determine the parameters and performance of electrical, electronic products and materials upon change of the temperature environment in high-temperature, low-temperature or constant tests.
Programmable Temperature and Humidity Testing Machine are able to provide rapid product temperature change rates and use varying levels of relative humidity to locate design problems prior to shipping your products, improving product quality and reliability.
LINPIN's Bench top Chambers offer flexibility, uniformity, and control accuracy required for cost effective testing for a variety of products. Ideal for testing the products such as computer components, automobile sensors or cellular phones, these chambers combine superior performance with compact design that is ideal for research and development or personal point-of-use testing.
Available in several sizes, Bench top Chambers allow you to cost effectively select the exact chamber that best meets your environmental test criteria.
Hand motion flask tube bottle shaker
Manufacturer of shaker machine in delhi mumbai assam chennai kolkata and other
Features
Micratech make flask shaker machine wrist action hand motion type, has been fitted with d.C. Motor to work on 220 volt a/c 50 cycles efficiently for a longer time easily.
The electric wrist action shaking machine is build to grip 50 ml to 500 ml conical flasks.
Mitec-881 - wrist action shaker has flasks mounted spindle to swing through little amplitude sturdy eccentric mechanism provides effective mechanical shaking.
The shaking speed action is controlled by an electronic regulator 100 r.P.M to 350 r.P.M approximately. For more details, visit our site micratechnologies com
Holding capacity
• To hold 4 flasks cap. 50 ml. To 500 ml. By side clamps
• To hold 8 flasks cap. 50 ml. To 500 ml. By side clamps
• To hold 12 flasks cap. 50 ml. To 500 ml. By side clamps
Equipment: brand new, micratech make, model no: mitec-881
Condition: excellent send inquiry at sales [at] micratechnologies com
To inquire prices and details, contact/email below :
Vortex shaker (mitec-73)
Search for vortex shaker cyclomixer laboratory suppliers manufacturers in india
Variable speed mixer to require out hand mixing.
Smaller define.
Steady at high speeds on account of a solid ms base for vibration damping.
Suitable for temporary time operation(touch capacity), initiated by pressing shaker association or uninterrupted operation.
Suitable for persistent operation with low self warming on account of self ventilation of engine.
Tradable connectors.
Technical data
Type of movementorbital
Speed range0 - 2500 rpm
Operation modecontinuous operation
Touch functionyes
Dimensions140 x 140 x 190 mm.
Weight2.8 kgs
Permissible ambient temperature5 - 40 deg.
Permissible relative moisture80%
Motor rating50 watt
Speed displaynone
Voltage220 - 240 v
Frequency50/60 hz
We, micra technologies are centered manufacturers and suppliers of shaker machines in india and global market. Micratech make reciprocating shaking machine (kahn rack style) is awarded through us in more than a few schools, universities and industries. The reciprocating shaking desktop that we deliver is peculiarly designed for shaking kahn racks, bottles, flasks of more than a few sizes by adjusting sections.
Necessities of micratech reciprocating shaking laptop
Built-in with heavy duty motor to work on 220v, ac 50 hz single phase
The pace of motion is adjustable automatically by belt tension
Pace is constant in equivalent units to approximately 275
Non-compulsory components
Computerized 0-60 minute timer
Manufacturers & suppliers lab rocking shaker in india supplied in west bengal, karnataka, maharashtra, tamilnadu, and other states.
Specifications :
Voltage:Ac 110/230v
Type:Rocking shaker
Main construction:Elegant powder coated steel and ss304
Controller:Microprocessor based pid controller, water proof keypad with timer and speed in rpm display and setting
Shaking timer:0-999 hrs, shaking timer can also be set in seconds, minutes or hours function and at the end of operation audio and visual warning
Motor:Noiseless powerful brushless induction motor 15w
Platform:L30 x w30cm
4348 Laboratory Equipments Instruments Suppliers
Short on time? Let Laboratory Equipments Instruments sellers contact you.
ShinTek can supply varieties of Refractory metal fabricated products, including Molybdenum (Mo), Tungsten (W), Tantalum (Ta), Niobium (Nb) fabricated products, e.g. ingot, forgings, rods, plates, sheets, foils and assembled products. They are very popular used in a wide of industries, including FPD/Touch sensor, high temperature furnace, medical / nuclear radiation shielding, aviation, specific tools, optical glass, semiconductor, chemical anti-corrosion, superconductor, etc...
Tantalum tube specifications:
1. Pure Tantalum Products
2. Purity: =99.95%, 99.99%
3. Dimension: Per customer's requirement;
4. Annealed
ShinTek can supply different types of Tantalum, including Tantalum Foils, Tantalum Sheets, Tantalum Plates, Tantalum Rods / Bars, Tantalum tube, Tantalum Forgings, Tantalum Ingots.
Purpose:
This production line is mainly used for liquid dispensing or vial 2-50ml freeze-drying production, to be completed cleaning, sterilizing, filling, half or full tamponade, capping functions.
Features:
1. Linear arrangement, it is easy to operate, observe, debug, repair.
2. Linkage control line, simple operation, low labor.
3. Intermittent spraying water, servo system, PLC and HMI control, high automation.
4. Using high quality electric component, and control cabinet is separated with machine, the interference do not exists between electric component, it can run normally in high humidity environment.
Main technical parameters:
This line includes washing machine, tunnel machine, filling machine and capping machine
applicable standard 2ml ~ 50ml
production capacity of 200 bottles ~ 400 bottles / min
bottle clarity: more than 99.9%
bottle breakage rate less than 0.1%
sterilization temperature 320 degree Centigrade
heat distribution plus-minus 5 degree Centigrade
installed capacity plus-minus 1%
gasser passing rate of 99%
total power 100KW (heating power 64KW)
Working principle:
Plastic sheet (PVC, PVC / PE) is rolled and become suppository shells by the system positive pressure blow in the molding process. In the filling process, stir medicine liquid is filled into shell by high-precision metering pump. Then it will be cut, after a period of low temperature, to achieve solid suppository, by shaping, sealing, print number and cutting processes, finished suppository products.
Feature:
1. Adopt plug-in filling, accuracy position, no drop, high measurement accuracy.
2. Wide adaptability, viscosity liquid can be filled, such as gelatin matrix.
3. PLC programmable control and industrial human-machine interface operation, with a high degree of automation, easy adjustment, high control accuracy and reliability, smooth running characteristics.
4. Big capacity barrel, with a constant temperature, stirring and liquid level automatic control devices.
5. Adding medicine liquid with low position, it reduces labor intensity. With a fluid in circles and pipe insulation, ensure stop machine, the liquid is not solidified.
6. Operation in single side, good vision.
M-SFM model main technical parameters:
1. Yield: 6000-10000 grains /h
2. Single particle dose: 1-5g /grain (also making special specifications)
3. Dose tolerance: 2%
4. Suppositories Shape: bullet, torpedo, duckbill type and other special shapes
5. Adaptation base: semi-synthetic glycerides of fatty acids, glycerinated gelatin, polyethylene glycol, etc.
6. The reservoir bucket capacity: 50L
7. Packing height: 1400mm
8. Power supply: 380V, three-phase, AC
9. Total power: 13KW
10. Air pressure: 0.6MPa
11. Air consumption: 1.5m3 / min
12. Water: 1000 kg / h (reusable)
13. Dimensions: 7000 x 1500 x 1700mm (L x W x H)
14. Weight: 2000kg
YC-015 Lab Spray dryer is self contained and supplied complete and ready for immediate operation. All major components are housed within a stainless steel cabinet and the unit can be used on a bench top or with an optional stainless steel stand. The system was designed to be stand by a keyboard, conducted by a colorful crystal screen of touch guidance mode , and allowed two modes of run: Automatic-mode, and Eye-monitored mode for the purpose of easily controlling experimental process .
Laboratory Incubators 20 L and more up to 1000 L
Double door , Stainless Steel 304 or 316
PID controller with Alarms
with circulating fan for heat distribution
Sale HGH Liquid, Monomer purity over 99%, Protein purity can be customized, Low prices, Welcome to consult! Contact information. QQ number, 1520518564. phone number, 86-15543723331.
Sale HGH Liquid, Monomer purity over 99%, Protein purity can be customized, Low prices, Welcome to consult! Contact information. QQ number, 1520518564. phone number, 86-15543723331.
Table structure
Prime quality cold rolled mild steel section pipe
Legs comprising of 2'' sq.Pipe 16 swg
Cross rails are argon welded with legs
All welded joints are properly ground&finished
All sharp edges are debussed
Long rails are fitted with screws
Legs are fitted with leveling screws
Features
1. 7-inch tft lcd touch-screen, humanized-machine interaction mode. Operation simply and powerful.
2. Multiple test modes£º
Instant test mode: insert the test card, testing immediately
Automatic test mode: insert the test card, automatic timing, automatic testing
Sequence test mode: used for multiple patients and batch testing, following the preset sequence, automatica timing, promote and test.
3. Large storage, can store up to 100, 000 records. Results records can be queried and processed.
4. Built-in arm microprocessor, fast and powerful.
5. Large items storage, can store 10, 000 items. Any items can be added by external card.
6. Supporting multiple interfaces, usb, rs232 and network interface
7. Supporting bar-code scanning.
8. Replacing light source and modify algorithms are the two ways which are suitable for different reagent supplier.
9. Built-in thermal printer, print test results on need.
10. Mifare one card can save different lot of reagents project items information
