Polarographic Dissolved Oxygen Electrode easy to use.
Portable Dissolved Oxygen meter is equipped with a backight LCD display.
1 or 2 points calibration using the air-saturated water or zero oxygen solution.
Salinity and barometric pressure compensations eliminate the measurement errors.
Automatic temperature compensation ensures accurate readings over the entire range.
Auto-read function senses and locks the measurement endpoint.
Auto-power OFF effectively conserves battery life.
Setup menu allows setting the number of calibration points, temperature unit, etc.
Reset function automatically resumes all settings back to the factory defaults.
Expanded memory stores or recalls up to 100 data sets.
USB communication interface for data transfer or connecting a power adapter to the meter.
Battery Life : Approximately 150 hours without backlight.
Automatic shutdown - After 15 minutes, If not in use
Carrying Case is Standard Supply
Dissolved Oxygen Range -Â 0.00 to 20.00 mg/L, (ppm)
Dissolved Oxygen Resolution : 0.01 mg/L, (ppm)
Dissolved Oxygen Accuracy-±0.5 mg/L, (ppm)
Saturation Range -Â % 0.0 to 200.0%
Saturation Resolution : 0.1%
Saturation Accuracy -±2.0%
Calibration : 1 or 2 points
Temperature Compensation - 0 to 50C / 32 to 122F, automatic
Pressure Correction - 60.0 to 113.3 kPa / 450 to 850 mmHg, manual
Salinity Correction -Â 0.0 to 50.0 ppt, manual
Display -Â LCD
Hold Function Selectable : - Manual or Automatic hold after measurement end point
Auto-Power OFF-Â 15 minutes, if not in use
Carrying Case- Available
Reset Function-Â Yes
Date & Time -Â Yes
Memory : Upto 100 data readings
Connector- 6-pin mini-DIN
Communication : USB Interface
Power Supply : 3 1.5V AA batteries or 5V DC power adapter
Packing Dimension : (LxWxH)mm 350 100 300mm
Net / Gross Weight -Â 300g/ 1.5kg
Ip67 Waterproof level, can float on the water surface.
Polarographic DO Electrode module can be replaced.
Auto OFF Function.
Double Line LCD Display.
Temperature Compensation.
Long Life Usage.
Applications-Â
Laboratories, Environmental Monitoring, Food processing,
conventional Water or Wastewater, Chemical industry,
aquaculture, Aquariums, Swimming Pools.
TECHNICAL SPECIFICATIONS :
DO Range- 0.0-19.9mg/l (ppm)
DO Resolution : 0.1mg/l (ppm)
DO Accuracy-+0.5mg/l (ppm)
DO Calibration Points - 2 points
Temperature Compensation : 5-45 C (Auto)
Temperature Range : 0.0-99.9 C
Temperature Resolution : 0.1 C, Accuracy +0.5 C
Ambient Temperature : 10-50 C
Calibration Reminder-Yes
Display : Double Line LCD display
Auto OFF - After 10 minutes, if not in use
Battery- 4 x 1.5V coin cell batteries
Dimension (LxWxH) & Weight 170 x 37 x 37mm & 90g
Visual Colorimeter is a kind of Visual colour measuring Instrument.
It measures colour scale unit which is an International acknowledged
specific colour method, as a standard to measure the colority of liquid, gelatin, solid and powder samples.
Visual measurement of colour matching to determine material colour
Design in conformity with internationally accepted colour scale unit
Simple structure and easy to operate
Replaceable sample chamber liner
Replaceable light source, two spares Incandescent lamps.
Viewing system fully adjustable
TECHNICAL SPECIFICATIONS
Measuring principal :� Visual, in terms of International colour scale units
Modes : Transmittance, reflectance
Measurments range :� 0.1 â?? 79.9 Red, 0.1 â?? 79.9 Yellow, 0.1 - 49.9 Blue, 0.1 - 3.9 Neutral
Resolution : 0.1 colour scale unit
Viewing system Fully adjustable
Light Source- Incandescent lamp
Illuminant -Â Approximates to daylight
Path Length -Â Up to 180 mm
Diffuse reflectivity of White plate - > 80%
Amplification of the magnifiers- 1.9 X
Dimension of Colorimetric untensil- 10x20x40mm, 25.4x20x40mm, 133.4x20x40mm
Power Supply & Power Watts-Â AC 220V/50Hz & 50W
Dimension- 620x440x300mm
Weight- 12.5 kg
Microprocessor Flame Photometer Are used for the determination of sodium, potassium, calcium and lithium. They use the latest microcontroller technology and advanced engineering techniques so as to give enhanced and reproducibility.
Features:-
Useful for both ppm and meq application
Measurement of four elements with single aspiration .Automatic filter selection
Curve fitting software (up to 5 standards)
Collaboration stored in memory
Re-standardization facility with only one standard
User friendly menu driven software
Help key available at each & every operating step.
Technical Specification:-
Model
S-935
Range
General
Serum
Urine
Na: 0-100 ppm
Upto 250 meq/l, 1: 100Â dil
K: 0-100 ppm
Upto 250 meq/l, 1: 100 dil
Ca: 0-100 ppm
Upto 250 meq/l, 1: 100 dil
Li: 0-100 ppm
Upto 250 meq/l, 1: 100 dil
Na:- 0-200
1:100 dil
K: 0-10
1: 100 dil
Li: 0-2
1: 5 dil
Na: 0-250&
1: 100 dil
K: 0-100
1: 100 dil
Ca: 0-10
1:2 dil
Sensitivity
Na: 0.5 ppm, K: 0.5 ppm,
Ca: 15 ppm (Optional), Li: 50 ppm (Optional)
Resolution
0.1 ppm/meq
Accuracy
2 % Error when 3 ppm Na/K and 5 ppm
Li are set as maximum standards
Display
Graphical LCD With Backlit
Average Time
In-built in software
Calibration
Up to- 5 Point Calibration with Curve Fitting Software
Gas Control
Adjustable With Knobs
Atomizer
Axial Flow Type
Ignition System
Auto Ignition System
Repeatability
+/- 2 Counts
Detector
Silicon Photodiode
Filters
Narrow Band Interference Glass Filters
Flame System
LPG and Dry Oil Free Air
PC Interface
USB Port
Power Supply
230V, +/-10 % AC, 50 Hz
Weight
7.5Â Kg (APPROX)
Accessories
Instrument with Na & K Filters, Sample Holders, Instruction Manual, Dust Cover, Main Lead, Air and Gas Tubing along with end Damps, Capillary Tubes, Chimney, Cleaning Wires, Drain Pipe etc.
Digital Flame Photometer S-931Â manufactured by us boast of top-notch quality. Supreme quality raw materials and properly updated technology is utilized for manufacturing them. Durability, longevity, strength, perfect designs are their highlights. Our top notch quality experts, R&D team and engineers, are responsible for developing products, with the latest trend in sight.
 Instrument with Na & K Filters
Sample Holders
Instruction Manual
Dust Cover
Main Lead
Air and Gas Tubing along with end Damps
Capacity Tubes
Chimney
Cleaning Wires
Drain Pipe
Air Compressor
Microprocessor Water and Soil Analysis Kit S- 959 measures 8 parameters like pH, Conductivity, TDS, DO, Salinity, Temp, mV, Turbidity. It has perfect durability and longevity which can be stored up to 1000 samples. Mains cum battery operated. Fitted in briefcase having soft touch membrane keys.
Features:
pH, Conductivity, TDS, DO, Salinity, ORP, Temperature Measurements.
Highly Accurate & Stable
User Friendly & Menu Driven Software
16X2 Line Alphanumeric Jumbo LCD
PC Interface Facility
Interfacing Port RS 232
Technical Specification-
Model
S- 959
Product Name
µP Water and Soil Analysis Kit
Display
16X2 Line Alphanumeric Jumbo LCD
pH
Range
0-14 pH
Resolution
0.01 pH
Accuracy
± 0.01, + 1 Digit
Temp. Comp.
0-100C, (Auto/ Manual)
Conductivity
Range
0-20, 0-200
0-2, 0-20, 0-200 mS, 0-1000 mS
Resolution Selection
0.01 S
Accuracy
+ 0.5% FS, + 1 Digit
Cell Constant
0.05-10.5, Adjustable
Temp. Comp.
5-50C (Auto/Manual)
Reference Temp.
5-50C (Auto/Manual)
Temperature
Range
0-100C
Resolution
0.1C
Accuracy
+ 0.1C, + 1 Digit
Sensor
PT-100 (RTD Probe)
TDS
Range
0-20, 0-200 ppm
0-2, 0-20, 0-200 ppt, 0-1000 ppt
Range Selection
Automatic
Cell Constant
Adjustable
Resolution
0.01 ppm
ORP
Range
0-+1999.9 mV
Resolution
0.1 mV
Accuracy
+0.1 mV, + 1 Digit
Salinity
Range
0-20, 0-200 ppm
0-2, 0-20, 0-50 ppt
Resolution
0.01 ppm
Accuracy
+ 1% of range, + 1 Digit
DO
Range
20 ppm
Resolution
0.1 ppm
DO Sensor
Gold/Silver Probe
Temp Comp.
Auto/Manual (50C)
Turbidity
Range
0-1000 NTU
Resolution
1 NTU
Sample System
30 mm Clear Glass Tube
Power Supply
12V Rechargeable Battery or 12V/2 AMP Adaptor
Accessories:-
pH Electrode
Cond/TDS/ Cell
Probe
DO Probe
DO Membranes
Tables 7pH & 4pH
12V Adapter
Software CD
RS 232 Cable
Microprocessor Water and Soil Analysis Kit S- 967 measures 7 parameters like pH, Conductivity, TDS, DO, Salinity, Temp, mV,It has perfect durability and longevity which can be stored up to 1000 samples. Mains cum battery operated. Fitted in briefcase having soft touch membrane keys.
Features-
pH, Conductivity, TDS, DO, Salinity, ORP, Temperature Measurements.
Highly Accurate & Stable
User Friendly & Menu Driven Software
16X2 Line Alphanumeric Jumbo LCD
PC Interface Facility
Interfacing Port RS 232
Technical Specifications-
Model
S- 967
Product Name
P Water and Soil Analysis Kit
Display
16X2 Line Alphanumeric Jumbo LCD
pH
Range
0-14 pH
Resolution
0.01 pH
Accuracy
+ 0.01, + 1 Digit
Temp. Comp.
0-100C, (Auto/ Manual)
Conductivity
Range
0-20, 0-200 µS0-2, 0-20, 0-200 mS, 0-1000 mS
Resolution Selection
0.01 µS
Accuracy
+0.5% FS, + 1 Digit
Cell Constant
0.05-10.5, Adjustable
Temp. Comp.
5-50C (Auto/Manual)
Reference Temp.
5-50C (Auto/Manual)
Temperature
Range
0-100C
Resolution
0.1C
Accuracy
+ 0.1C, +1 Digit
Sensor
PT-100 (RTD Probe)
TDS
Range
0-20, 0-200 ppm,0-2, 0-20, 0-200 ppt, 0-1000 ppt
Range Selection
Automatic
Cell Constant
Adjustable
Resolution
0.01 ppm
ORP
Range
0-+1999.9 mV
Resolution
0.1 mV
Accuracy
+0.1 mV, + 1 Digit
Salinity
Range
0-20, 0-200 ppm0-2, 0-20, 0-50 ppt
Resolution
0.01 ppm
Accuracy
+ 1% of range, + 1 Digit
DO
Range
20 ppm
Resolution
0.1 ppm
DO Sensor
Gold/Silver Probe
Temp Comp.
Auto/Manual (50�°C)
Accessories:-
pH Electrode
Cond/TDS/ Cell
Probe
DO Probe
DO Membranes
Tables 7pH &4pH
12V Adapter
Software CD
RS 232 Cable
Operation Manual
Pocket Multiparamter is a portable multi para tester used in Water & Waste Water Treatment Electroplating Rinse Tanks, Drinking WaterHydroponics, Aquaculture, Aquariums, Fish Farms, Swimming Pools etc..
Features :
Ip67 Waterproof level, can float on the water surface.
pH, Conductivity, TDS, Temp. Functions.
Electrode module can be replaced, Long Life Usage.
Auto OFF Function.
Double Line LCD Display.
Temperature Compensation.
4 x 1.5V coin cell batteries.
LABMAN LMION40 ion meter is designed for high performance and easy operation. The meter is capable of measuring up to 7 parameters, including� ION concentration,pH, ORP Conductivity, TDS, Salinity, Resistivity, and temperature.
Features:
Ion concentration mode directly displays readings in ppm, ppt, or any other units of your choice
Calibrate up to 2 points for pH using USA or NIST buffer sets; Up to 5 points for ion concentration measurement
Auto-buffer recognition eliminates calibration mistakes and ensures calibration accuracy
Automatic temperature compensation for best accuracy under fluctuating temperatures
Meters automatically calculate and display electrode slope
Automatic message prompts help you easy to operate meter.
Expanded memory stores and recalls up to 99 data sets
USB Communication interface can be sent data to computer
During the ion mode, 2 to 5 points push-button calibration from low to high concentrations
Direct readout ion concentration simplifies the elaborate measurement process.
Automatic Temperature Compensation (ATC) ensures highly accurate measurements over the entire range.
TECHNICAL SPECIFICATIONS
Ion Concentration Range-0.001~19999 ppm,mg/L,mol/L
Ion Concentration Accuracy +0.5% Full Scale (Monovalent),+1% Full
pH Range-2.000 to 20.000pH
pH Resolution -0.001pH
pH Accuracy-0.002pH
Calibration Points :5 points, NIST(pH4.00/6.86/9.18) or USA(pH4.01/7.00/10.01]
mV/ORP Range : 0 to +1999.9mV
mV/ORP Accuracy +0.2mV
Temperature Compensation: 0.0 to 100.0C, Manual or Automatic
Conductivity Range : 0 to 1.999,19.99,199.9,1999 S, 19.99, 200.0mS
Conductivity Accuracy : 0.5% F.S
Calibration Points : 1 point per range
Temperature Compensation : 0 to 50C, Manual or Automatic
Cell Constant : 0.1,1.0,10 adjustable
TDS Range : 0 to 100 ppt, Max.200 ppt
TDS Conversion Factor : 0.01 to 1.00, Default 0.67
Salinity Range : 0 to 50 ppt, 0.00 to 5.00%
Resistivity Range and Accuracy : 0 to 100M, W - 1%
Temperature Range : 0.0 to 100.0C,
Temperature Accuracy :+0.3C
Memory & Output : 99 data sets with date/ time stamping, USB
Weight -Â 1.75 kg
LABMAN LMMP-30 water quality meter is designed for high performance and easy operation. The meter is capable of measuring up to 7 water quality parameters,
including pH, ORP Conductivity, TDS, Salinity, Resistivity, and temperature.
MULTI-POINT PUSH-BUTTON CALIBRATION
The meter has multi-point calibration mode. From setup menu, choose calibration
and immerse electrode into indicated calibration solution, press ENTER key and
meter is automatically calibrated.
AUTO-BUFFER RECOGNITION
During calibration, if the calibration solution or selected value does not match the
meter\'s indicated value, an ERROR message is displayed.
VIEWING OF ELECTRODE SLOPE
After calibration, the percentage slope of the electrode is displayed before the
meter returns to measurement mode. Per the slope value, user decides whether to
change the electrode.
AUTOMATIC TEMPERATURE COMPENSATION� : By using temperature probe
AUTO-RANGING FOR CONDUCTIVITY
The meter has auto-range functions for measuring conductivity and total
dissolved solids (TDS). Upon immersing conductivity sensor into sample
solution, the screen immediately displays the value in appropriate
measurement range for accuracy,
ADJUSTABLE TEMPERATURE COEFFICIENT
Various ions in solution have different temperature coefficients.
LABMAN-LMMP30. can set the temperature coefficient between 0 and
3.9% in degrees centigrade for optimum accuracy.
ADJUSTABLE CELL CONSTANT
The meter has three cell constants for measuring requirements. Once a
cell constant has its calibration set, it is saved and does not require
re-calibration when switching meter.
MESSAGE INDICATOR
LABMAN-LMMP30 displays helpful messages like an on-screen manual for
easy operation of this meter and selection of the various options.
SAVE AND COMMUNICATION INTERFACE
The meter all has real-time date/clock stamps. The memory stores up to
99 discrete data sets. Press the SAVE key to store the current measured
values and it automatically generates a serial number with the date
and time. This data can then be sent to a computer via the USB port
TECHNICAL SPECIFICATIONS
pH Range-Â -2.000 to I6.000pH
pH Resolution +0.001pH
pH Accuracy -±0.002pH
Calibration Points :2 points, NIST(pH4.00/6.86/9.18) or USA(pH4.01/7.00/10.01]
mV/ORP Range : 0 to+1999.9mV
mV/ORP Accuracy :+0.2mV
Temperature Compensation: 0.0 to 100.0C, Manual or Automatic
Conductivity Range : 0 to 1.999,19.99,199.9,1999 S, 19.99, 200.0mS
Conductivity Accuracy : + 0.5% F.S
Calibration Points : 1 point per range
Temperature Compensation : 0 to 50�°C, Manual or Automatic
Cell Constant : 0.1,1.0,10 adjustable
TDS Range : 0 to 100 ppt, Max.200 ppt
TDS Conversion Factor : 0.01 to 1.00, Default 0.67
Salinity Range : 0 to 50 ppt, 0.00 to 5.00%
Resistivity Range and Accuracy : 0 to 100M, W+ 1%
Temperature Range : 0.0 to 100.0C,
Temperature Accuracy : +0.3C
Memory & Output : 99 data sets with date/ time stamping, USB
Weight - 1.75 kg
Turbidity meter LMTB200 with TSS measurements mode,selectable four turbidity units
Turbidity meter is equipped with a 4.5" TFT display
2 to 7 points calibration using the formazin standards
Selectable four turbidity units,including the NTU,FNU,EBC and ASBC
TSS conversion factor ensures accurate measurement for total suspended solids
Contiuous measurement mode that can used for indexing and matching the sample vials
Hold fuction freezes current reading for easy viewing and recording
Password protection prevents the unathorised calibration and settings
Help message as a operational guide that helps user quickly begin using the meter
System menu allows setting the 9 parameters,including the date and time,resolution etc..,
Reset feature automatically resumes all settings back to factory default settings
Portable Turbidity meter, has Principle Nephelometric Method (90)
2 to 5 points calibration, using formazin standards.
Selectable of 4 Turbidity units NTU, FNU, EBC, ASBC.
Single measurement mode, automatically identify and lock the measurement end.
Continuous measurement mode for indexing or matching vials.
Automatic Power OFF, effectively save battery energy consumption
Settings menu to customize the number of calibration points, date and time, display resolution etc...
Reset function, automatically restore the meter to factory default settings.
Expand memory to store or retrieve up to 100 sets of data.
USB communication interface, easy to transfer data or connect power adapter to the meter.
Automatic shutdown - After 15 minutes, If not in use
Carrying Case is Standard Supply
Principle-Â Nephelometric Method (90)
Turbidity Measuring range-0~1100 NTU/0~275 EBC/0~9999 ASBC
Display resolution -0.01 (0~99 NTU), 0.1 (100~999 NTU), 1 (1000~1100 NTU)
Measurement accuracy -2% (0~500 NTU),+3% (501~1100 NTU)
Calibration point -Â 2 to 5 points (0.02, 10, 200, 500, 1000NTU)
Calibration Standard value : 200, 500, 1000 NTU
4 turbidity units-Â NTU, FNU, EBC and ASBC.
Light source-Â Infrared light-emitting diode, 850nm
Detector : Silicon photoelectric
Stray light : ; 0.02 NTU
Vial size -Â 60 (height) 25 (diameter) mm
Sample Volume : (approx.) 30ml
Carrying Case- Available
Auto-Power OFF : Yes
Display -Â LCD
Data storage : 100 data readings
Ambient Temperature -Â 10 C~ 40 C
Interface- USB
Power supply type - AA battery 3 cells or DC5V power adapter
Packing Dimension -Â (LxWxH) 280 x 80 x250 mm
Net / Gross Weight : 300g / 1.5kg
Highly Stable & Accurate.
16 Character X 2 Lines Alphanumeric LCD.
30 mm flat bottom Test Tube.
0 to 1000 NTU
Automatic Range Selection.
Higher durability and long life.
Tested on quality parameters.
1000 Samples Storage with Date &Time.
Measurement of Temp. and Turbidity.
Technical Specifications:-
Model
S- 966
Turbidity
Range
0-1000 NTU
Resolution
1.0 NTU in lowest Range
Range Selection
Automatic
Accuracy
+3%, FS+1 -digit
Detector
Photodiode
Sample System
30mm Clear Glass Test Tube
Light Source
3.6 V/ 100ma LED
Calibration
Manual
Temperature
Range
0C to +100C
Resolution
0.1c
Accuracy
+0.2%
Input Type
Pt 100
Calibration
Auto/Manual
Display
16 Character X 2 Lines Alphanumeric LCD
Display Format
Temp &Turbidity Simultaneously
Setting
By Soft Touch Keys
Storage
1000 Samples With Date & Time
PC Interface
RS-232
Real Time Display
24 Hour Mode With Date
Power Supply
230 V +-10% Ac 50 Hz Dimension 198x238x103mm
A Needle Burner cum Syringe Destroyer is a vital medical device used for the safe and efficient disposal of used needles and syringes. This device typically employs a heating element to melt and incinerate needles, rendering them non-reusable and eliminating the risk of accidental needlestick injuries. It provides a hygienic and environmentally friendly solution for healthcare facilities to manage sharp medical waste, ensuring the protection of both healthcare workers and the environment.
Key Features :
It is moulded type made of ABS Plastic and is Shock Proof.
Suitable sliding tray made of ABS lined with SS material of thickness 0.8mm (minimum) on the side walls as well as the bottom of the tray is provided for collection of residue and destroyed tips syringe.
Suitable provision to burn the needle and to cut the syringe tips are provided in the unit.
It complies in general to the requirements of IS:302 (Part-1) 1979 to ensure safe and reliable operation in normal use.
2. Manual Cutter: Fitted with High Carbon Cutter to cut Syringe Hub.
3. Capacity: The unit is having adequate capacity to destroy all kinds and following sizes of injection needles. Dia ranging from 24G upto 18G.
4. Power Switches: Power on/off switch is provided along with power on indicator. The unit is provided with fuse of adequate rating. The item quoted is also provided with power cord of 1.5 meter length and an earthing point.
5. Power Requirements: Power 230V+10% 50HZ AC supply requirements. The following are the power requirements.
1. In Stand-by mode maximum upto 3 watt.
2. During destruction of thickest needle of 18G maximum power requirement/power consumption is maximum 5 amp at 230VAC.
3. The 5 pieces of injection needle of 18G upto full length as available in market can be destroyed in continuous operation.
4958 Laboratory Equipments Instruments Suppliers
Short on time? Let Laboratory Equipments Instruments sellers contact you.
