Characteristic
1. High temperature resistance, corrosion resistance, no infiltration with nonferrous metal melt such as aluminum melt.
2. Excellent thermal conductivity, strong thermal shock resistance and no cracking.
3. Oxidation resistance and long service life.
4. It can be customized according to customer requirements and specifications.
4348 Laboratory Equipments Instruments Suppliers
Short on time? Let Laboratory Equipments Instruments sellers contact you.
HIGH-SPEED TUBULAR SEPARATOR
High Speed Tubular Bowl Separator
Structure and principle: The separator consists of machine body, driving part ,bowl, liquid collecting pan and liquid-in bearing seat etc. The material is sprayed onto the bowl from the inlet on the bottom and strong centrifuge force is formed when the bowl rotates with the material and that makes the material flow upper along the wall of the bowl and then separated because of the different gravity by the centrifugal force.
GF-for separation: Heavy liquid forms outer ring and light liquid forms inner ring. They flow to the top of the bowl and discharge from their respective outlet. And the little solid is settled on the wall of the bowl and discharged manually after the machine stops.
GQ-for clarification: Heavy solid is deposited on the inner wall of the bowlï¼?and forms the sludge. And it will be
discharged by manual after the machine stops. The clear liquid flows out of outlet from the top of the bowl. It is mainly used for separating all kinds of suspension difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. The motor connect with the big pulley and delivery the power to the spindle through the belt, tensioner and small pulley and rotate with the bowl in high-speed as the clockwise. The high speed tubular centrifuge is mainly used in liquid-solid separation, liquid-liquid-solid separation in bio-pharmacy, beverage, chemical industry. It is an ideal separation equipment by centrifuging, especially for those feeding with little gravity difference, and small dimension in diameter.
is result of years of research about Nano Silver and its effect on our health. It turns out that Silver is an important mineral for our health and plays very crucial role in strong immune system and in protecting us from all kind of pathogens which make us.
With Nano Silver Generator, a Nano Silver Water solution is made at home using our automatic equipment with patented technology. Regular intake of small amount of Nano Silver Water taken can help us in keeping healthier.
We have a wide range of high performance Spectrophotometers that include Double-Beam Spectrophotometer, Single-Beam Spectrophotometers and Visible Range Spectrophotometers. We are one of the dominant Spectrophotometer Exporters from India. The Spectrophotometers are manufactured from the optimum quality raw materials under strict quality control measures. Our Spectrophotometers are known for easy operation, accurate results and compact structure. We have ready stock of Spectrophotometers and offer them within the stipulated time frame and that too at very competitive prices.
Detail:
This series of products is designed and produced by advanced technology, and also by user&161175;s requests. By mechanical compulsory pulsation, it exhausts over 98% of the cold air in the vacuum, making sterilization highly effective. With temperature rising evenly fast, sterilization is completed within the shortest time. For different requirement, different temperature can be chosen to satisfy your sterilization requirement.
Characteristic:
1. Rectangle main structure with inner tube, high-quality stainless steel for the interior room, strict quality and safety standard.
2. Power-driven door with interlock, safe, reliable and easy to operate
3. Lasting and durable sealed circle of silicon rubber, it is able to bear high temperature
4. Liquid-circulated vacuum pump to exhaust indoor air compulsively, making sterilization complete, dry and effective
5. Main components adopt famous brands, it is reliable and safe
6. Whole process of sterilization automatically with reliable high-performance, automatic record of the parameter
7. Multi-purposed, space-saving, ease to install, easy to operate
8. No noise or damage made when moving on the floor.
Main Technical Parameter:
ModelM-PVS60M-PV240M-PV360M-PV600M-PV1000
Volume60 L240L360L600L1000L
Cavity materialSUS304
Design press0.26 MPa
Working press0.22 MPa
Design temperature150&161227;C150&161227;C150&161227;C150&161227;C150&161227;C
Working temperature121-134&161227;C
Temperature uniformity&161220161192;0.5&161227;C
Max. vacuum-0.09MPa
Door typeSingle/double
Voltage/frequency380V/50Hz
Water sourcePure water
special Stainless steel cartageselectable
Steam generatorselectableselectableselectableselectableselectable
Soft water deviceselectable
ASTM E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM E595-15 Outgassing test - Test Requirement
CVCM collected volatile condensable materials 0.1%
TML total mass loss 1%
WVR the amount of water vapor regained
Outgassing test ASTM E595 - Test Conditions
Pre Condition: 73 F/ 50% RH (24Hours) ; Post Condition: 73 F/ 50% RH (24Hours)
This test method describes the test apparatus and related operating procedures for evaluating the mass loss of materials being subjected to 125 C at less than 7*103 Pa for 24 h. The overall mass loss can be classified into noncondensables and condensables. The latter are characterized herein as being capable of condensing on a collector at a temperature of 25 C.
ASTM E595-15 Outgassing test Brief
Many types of organic, polymeric, and inorganic materials can be tested. These include polymer potting compounds,foams, elastomers, films, tapes, insulations, shrink tubings,
adhesives, coatings, fabrics, tie cords, and lubricants. The materials may be tested in the as-received condition or prepared for test by various curing specifications.
More about Outgassing test ASTM E595,please contact us :
BENEMED BM-300E Automatic Electrolyte Analyzer for Hospital Lab ISE
Laboratory Equipment Electrolyte Analyzer Bm-300e
Features
Throughput: 60 samples/hour
Principle: ISE(Ion Selective Electrode)
5.6-inch color touch screen
Auto sampling, washing, calibration
Maintenance-free electrodes, 12 months lifespan
Simple tubing system, easy maintenance
CE marked
Technical Specifications
Sample type: Serum, etc.
Sample volume:100-200�¼L
Reagent consumption: 2 times sample volume
Calibration: Automatic or On-demand
Closed reagent, real time monitoring reagent
Printer: Internal thermal printer
Display: LCD
Multiple language: English, Russian, etc.
Storage: Up to 50,000 results
Interface: RS-232, support LIS
Working temperature:15-30 C
Humidity: 20%-80%
Dimension: 430 275 410mm
Power: AC100~240V, 50/60 Hz, 80W
Net weight :8 kg
Reagent
DS-I(NO.3) Standard A Standard B (390/160 mL)
Cleaning Solution (250 mL)
PVC Electrode Activating Solution
PVC Electrode Activating Solution(50 mL)
DS- Ref Ref. Filling Solution(10 mL)
DS- ISE Filling Solution (10mL)
Deprotein Solution
(R1: Diluent 18mL/bottle 1; R2: Protease powder 100mg/bottle6)
It is widely used in laboratories, it does not need to replace membrane and cleaning, save your working time. Mainly be used for sample filter, take out particulars, liquid and gas sterile filtration. Ideal products for HPLC, GC sample filtration. Our syringe filter outside use polycarbonate plastics, up and down is made by ultrasonic welding. One time shipped integrated body, could bear high temperature, will not have leakage at all.
Syringe Filter of TEFIC can be used as both filter and tester for small particles and bacterium in gas, oil, beverage, alcohol and etc.
How to choose the exact syringe filter:
TEFIC disposable syringe filters have varies types.
1. Mainly have two series. One is hydrophilic, another is hydrophobic series.
2.Filter diameter have 13mm and 25mm two types. Filtration membrane aperture has 0.22, 0.45um
3.Membrane material has:RC, Nylon, PVDF, PTFE,etc. Choose proper membrane is very important.
Our Syringe Filter Features:
1. Syringe filter outside case use high qualified Health level polypropylene material (PP)
2. Structure is precision, guarantee filtration is smoothly, inside space is reasonable, residual rate is very low.
3. Could bear pressure reach to 7bar
4. Edge of the syringe filter has thread, have function of anti-skidding, which is welcomed by users.
5. Our membrane is from the world largest filtration membrane company, which guarantee stable quality, high precision of the membrane aperture, supply utmost protection for your instrument and GC column.
6. Stable quality filtration membrane, each patch of the products no difference, guarantee your testing result consistency.
Handheld fiber microscope can check out depression , scratches, contamination and other conditions on FC / SC / LC fiber optic jumpers/pigtail quickly, the image of fiber end is very clear, it is applied to optical fiber communications and other industries. It not only can test PC end , but also can test APC end;it is an important fiber inspection equipment for operator/engineering contractors which proceed field operations and work on laser printing/ platemaking maintenance.
Model number:SDF-400X
SDF-200X/400X:Dimension(LWH ):22539.556mm
Weight(KG):0.65
Fiber Microscope with universal"slip-grip"adapter
4348 Laboratory Equipments Instruments Suppliers
Short on time? Let Laboratory Equipments Instruments sellers contact you.
