IPS-14RS Syringe Pump The IPS-14RS Syringe Pump is a sophisticated dual-channel fluid handling system designed to meet the exacting demands of modern laboratories and industrial settings. Offering precise control and advanced features, the IPS-14RS enables efficient and accurate fluid delivery for a variety of applications. Key Features: Independent Syringe Channels: Featuring two independent syringe channels, the IPS-14RS allows for simultaneous operation of different fluids or independent control over each channel. This capability enhances flexibility and efficiency in fluid handling tasks. Wide Syringe Compatibility: Compatible with glass, plastic, and steel syringes, the IPS-14RS accommodates syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm). This versatility enables users to handle various volumes with ease. Precise Flow Control: The IPS-14RS offers precise control over flow rates, with a range from 17.89 picoliters per minute to 121.51 milliliters per minute. Equipped with a stepper motor and microcontroller featuring Microstep Drive technology, it ensures accurate and consistent fluid delivery. Intuitive Interface: With a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14RS provides an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing productivity. Adaptive Pumping: Users can adjust flow rates even during the pumping process, allowing for fine-tuning of parameters for optimal performance. This adaptability ensures precise fluid handling for a wide range of applications. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.6 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: 5 Steps Operation Mode: Allows programming of up to 5 different steps for precise fluid handling. Saving and Recalling Recipes: Users can save and recall up to 5 recipes for convenient operation. Repeating Cycles: Capable of repeating recipes up to 50 cycles, enhancing efficiency in repetitive tasks.
IPS-14R Syringe Pump The IPS-14R Syringe Pump is a cutting-edge dual-channel device designed to provide precise and reliable fluid handling in various applications. With its innovative features and robust construction, the IPS-14R offers versatility and accuracy for demanding fluid delivery processes. Key Features: Independent Syringe Channels: Featuring two independent syringe channels, the IPS-14R allows simultaneous operation of different fluids or separate control over each channel. This feature enhances flexibility and efficiency in multi-channel applications. Wide Syringe Compatibility: The IPS-14R accommodates a wide range of syringe types, including glass, plastic, and steel. It supports syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14R ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates with a resolution of 357 nm/ step. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14R offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, allowing for fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid delivery tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: No Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.6 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
ANALYSER WITH SENSOR Make:DEL CONTROLS Model:DEL-AS Model Code:DEL-AS-A-965997 Technical Specification : Microcontroller based concentration Analyser Service - H2SO4/Oleum Range - As per requirement. Power Supply - 230VAC Display - Digital (7 Segment LED) Output - 4-20mADC Mounting - Panel Mounted Concentration Sensor with temperature compensator Type - Flow through
0.2ml PCR Plate Manufacturer: 0.2 ml Plastic PP PCR Microplates, 96 Wells, Full, Half, Non Skirted Type, Alphabetic & Numerical Marks, Autoclavable. Features ·Free of DNase, RNase, pyrogen ·Autoclavable (121, 20 min) ·Stable and not easy to deform ·Clear alphabetic and numerical marks, to facilitate sample recording ·Thin wall and uniform surface, to ensure the effectiveness of heat transfer ·Suitable for mainstream & real-time PCR instruments ·Applied in genomics, medicine, molecular biology, etc ·Multiple sealing methods for better sealing and less liquid evaporation ·High transparency for effective reactions in PCR experiments
96-well Magnetic Rod Sleeve Factory: 2ml High-purity PP Magnetic Rod Covers, 96 Wells, Round Hole, V Bottom, Transparent, for Nucleic Acid Extraction. Features ·No DNase, RNase, pyrogen, human DNA ·High-purity polypropylene (PP) ·Round-hole, V-bottom ·Uniform thickness and surface ·Suitable for nucleic acid extraction and clean-up applications ·Protect magnetic rods from direct contact with samples
2ml V-bottom Deep Well Plate Maker: 96 Well V-bottom Deep Well Microplates, 2 ml, Square Holes, Medical Plastic PP, Clear Numerical Marks, Autoclavable. Features ·96-well, square-hole, V-bottom ·Medical-grade PP material with high purity ·Designed with flat surfaces and uniform walls, convenient for sealing ·Autoclavable (121, 20 minutes) ·DNase-free, RNase-free, pyrogen-free ·All the holes of plates have the same size ·Marked with clear numbers, easy to operate and observe ·Compatible with multi-channel pipettes & automatic equipment ·Available for laboratory solutions storage, nucleic acid extraction, DNA detection, etc
Membrane Distillation Test Cell Description: A Membrane Distillation Test Cell, also referred to as VMD (Vacuum Membrane Distillation), AGMD (Air Gap Membrane Distillation) and MDC (Membrane Distillation Crystallization), is a small-scale apparatus used to study the membrane distillation (MD) process. MD is a thermally driven desalination technique that uses a membrane to separate pure water vapor from a saline solution. MD Test Cell is valuable for researchers and developers working on membrane distillation technology. They are used for: Evaluating membrane performance: Testing the effectiveness of different membranes for MD applications. Optimizing process conditions: Studying the effect of various factors like feed temperature, permeate temperature, flow rates, and membrane characteristics on MD performance. Developing new MD configurations: Investigating and testing novel MD configurations for improved efficiency.
Electro- Chlorinator -5gms/hr , 8gms/hr & 15gms/hr Minimum Order Quantity: 1 Piece. Fluid Media- Brine Materia l- FRP Automation Grade-Semi - Automatic Maximum Pool Size - 40mm Usage/Application - Domestic Color - Blue Warranty- 1Year Installation Service-Yes Country of Origin - Made in India Electro chlorinator is a simple and proven technology to convert ordany salt water in to sodium hypochlorite.Batch Type Electrochlorinator. Additional Information: Delivery Time: 2Weeks
IPS-14S Syringe Pump The IPS-14S Syringe Pump is an advanced dual-channel fluid handling device designed to meet the demanding requirements of various industries. With its versatile features and precise control, the IPS-14S offers reliable performance for a wide range of fluid delivery applications. Key Features: Independent Syringe Channels: The IPS-14S features two independent syringe channels, allowing simultaneous operation of different fluids or separate control over each channel. This versatility enables efficient handling of complex fluid delivery tasks. Wide Syringe Compatibility: Compatible with glass, plastic, and steel syringes, the IPS-14S supports syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm). This broad compatibility provides flexibility to users for various volume requirements. Precise Flow Control: With a flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14S ensures accurate and consistent fluid delivery. Its stepper motor and microcontroller with Microstep Drive technology offer precise control over flow rates with a resolution of 357 nm/�¼step. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14S provides an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-14S allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters for optimal performance. This adaptability ensures precise handling of fluid delivery tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: 5 Steps Operation Mode: Enables users to program up to 5 different steps for precise fluid handling. Saving and Recalling Recipes: Allows users to save and recall up to 5 recipes for convenient operation. Repeating Cycles: Capable of repeating recipes up to 50 cycles, enhancing efficiency in repetitive tasks.
IPS-14 Syringe Pump The IPS-14 Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-14 ensures reliable performance and precise control over fluid delivery processes. Key Features: Independent Syringe Channels: Equipped with two independent syringe channels, the IPS-14 allows for simultaneous operation of different fluids or independent control over each channel. This feature enhances flexibility and efficiency in multi-channel applications. Wide Syringe Compatibility: The IPS-14 supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14 ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-14 is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: No Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13RS Syringe Pump The IPS-13RS Syringe Pump is an advanced dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-13RS ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13RS allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13RS supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13RS ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13RS is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13S Syringe Pump The IPS-13S Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its advanced features and precision engineering, the IPS-13S ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13S allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13S supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13S ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-13S is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13R Syringe Pump The IPS-13R Syringe Pump is an advanced dual-channel device designed to fulfill complex fluid handling requirements across various industries. With its precision engineering and innovative features, the IPS-13R ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13R enables simultaneous and coordinated fluid handling operations, optimizing efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13R supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13R ensures precise and consistent fluid delivery. Its stepper motor, coupled with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13R is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double-channel design for simultaneous operation 4.3 Resistive Touch TFT LCD screen Microcontroller software for advanced control User-friendly interface for ease of operation High-precision pumping for accurate fluid handling
IPS-13 Syringe Pump The IPS-13 Syringe Pump is a highly versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-13 offers reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: The IPS-13 features two interdependent syringe channels, allowing for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13 accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13 ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-13 offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-13 allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double Channel design for simultaneous operation Wi-Fi connectivity (optional)
IPS-12S Syringe Pump The IPS-12S Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12S offers reliable performance and precise control over fluid delivery processes. Key Features: Wide Syringe Compatibility: The IPS-12S accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12S ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12S offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12S allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. 5 Steps Operation Mode: The IPS-12S offers a 5 Steps Operation Mode, allowing users to program multi-step pumping processes with ease and precision. Saving and Recalling Recipes: Users can save and recall up to 5 recipes, streamlining operations and ensuring consistent performance. Repeating Recipes: The IPS-12S enables users to repeat recipes up to 50 cycles, providing flexibility and efficiency in repetitive tasks. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.1 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional)
IPS-12R The IPS-12R Syringe Pump is a highly versatile and precision-engineered device designed to meet the demanding requirements of fluid handling across various industries. With its advanced features and robust construction, the IPS-12R offers unparalleled reliability and performance. Key Features: Wide Range of Syringe Compatibility: The IPS-12R accommodates syringes of different materials, including glass, plastic, and steel. Its adjustable configuration allows for the use of syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility for various applications. Precise Flow Control: With a wide flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12R ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance even in the most critical tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12R offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12R features adjustable flow rates even during the pumping process, allowing users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional) With its comprehensive features, precise performance, and user-friendly design, the IPS-12R Syringe Pump stands as a reliable solution for fluid handling needs in various industries, ensuring efficiency, accuracy, and control in every operation.
Moisture Analyzer has different names, such as Moisture Balance or Moisture Meter. This device consists of two main parts: a weighing unit and a heating unit that uses Infrared Halogen Technology. Its main purpose is to determine the moisture level in a sample by using the loss on drying principle. "Fast and Accurate Results" The MB series Halogen moisture analyzer is a user-friendly device that simplifies the moisture analysis process. It features on-screen assistance and a simple 3-step process for accurate readings. Step One - Tare the empty Sample Dish pan. Step Two - Add the sample and spread evenly. Step Three - Press start and see your results in just a few minutes.
A student physiograph, also known as a kymograph or physiological recording system, is a laboratory instrument used in physiology and biomedical research to record and analyze physiological signals and responses. Here's how it's used: Recording Physiological Signals: A student physiograph records various physiological signals such as heart rate, blood pressure, respiratory rate, muscle contractions, and electrical activity of the heart (ECG) or brain (EEG). These signals are typically measured using sensors or transducers that convert physiological phenomena into electrical signals. Experimental Setup: Researchers set up experiments by attaching sensors or electrodes to the subject (e.g., human, animal, or tissue preparation) to measure specific physiological parameters. The signals from these sensors are then transmitted to the physiograph for recording and analysis. Data Visualization: The physiograph records physiological signals over time, displaying them graphically on a rotating drum or digital screen. This allows researchers to visualize and analyze changes in physiological parameters in response to experimental manipulations, interventions, or stimuli. Data Analysis: Physiological recordings obtained from the student physiograph can be analyzed to extract various parameters such as amplitude, frequency, duration, and latency of physiological responses. This data analysis helps researchers quantify and interpret the physiological effects of experimental conditions or treatments. Teaching Tool: Student physiographs are commonly used in educational settings, such as undergraduate physiology or biomedical science laboratories, to teach students fundamental principles of physiological measurement, experimental design, and data analysis. Students learn how to set up experiments, record physiological signals, and interpret the results. Research Applications: In research laboratories, student physiographs are used for conducting experiments to investigate physiological mechanisms, pathophysiology of disease, effects of drugs or interventions, and responses to environmental stimuli. They are valuable tools for generating data that contributes to scientific understanding and medical advancements. Demonstration of Biological Concepts: Physiographs can also be used for demonstration purposes in public outreach events or scientific presentations. By recording and displaying physiological responses in real-time, researchers can illustrate biological concepts and engage audiences in understanding the complexity of living systems. Overall, student physiographs are versatile instruments that play a vital role in physiological research and education. They enable researchers and students to study, record, and analyze physiological responses, fostering a deeper understanding of human and animal biology.
Isolated organ baths are essential tools in pharmacology for studying the effects of drugs on isolated organs or tissues. Here's how they are used: Drug Screening and Testing: Isolated organ baths allow pharmacologists to assess the pharmacological activity of drugs on specific organs or tissues in a controlled environment. By exposing the isolated tissue to different concentrations of a drug, researchers can observe and measure its effects on physiological parameters such as contraction, relaxation, or electrical activity. Mechanism of Action Studies: Pharmacologists use isolated organ baths to investigate the underlying mechanisms of drug action. By examining how drugs modulate the contractile or electrical properties of isolated tissues, researchers can elucidate the pharmacodynamic pathways involved and gain insights into the drug's mode of action. Receptor Pharmacology: Isolated organ baths are particularly useful for studying receptor pharmacology. Researchers can assess the interaction between drugs and specific receptors present in the isolated tissue by measuring the dose-response relationship and determining the potency and efficacy of various pharmacological agents. Toxicity Testing: Isolated organ baths can also be used to evaluate the toxic effects of drugs on specific organs or tissues. By exposing the isolated tissue to increasing concentrations of a drug, researchers can assess its potential to induce adverse reactions such as tissue damage, impaired function, or cytotoxicity. Drug Development: Isolated organ baths play a crucial role in the early stages of drug development by providing valuable data on the pharmacological properties and safety profile of new drug candidates. Pharmacologists use this information to prioritize lead compounds for further preclinical and clinical evaluation. Teaching and Research: Isolated organ baths are widely used in academic settings for teaching pharmacology principles and conducting research experiments. They provide students and researchers with hands-on experience in experimental pharmacology techniques, allowing them to explore the effects of drugs on biological systems in a laboratory setting. Overall, isolated organ baths are versatile tools that facilitate the study of drug effects on isolated tissues, providing valuable insights into pharmacological mechanisms, drug-receptor interactions, and potential therapeutic applications. They are indispensable instruments in pharmacological research and drug discovery efforts.
The Franz diffusion cell apparatus is a laboratory instrument used in pharmaceutical research to study the release of drugs or active ingredients from topical formulations, such as creams, gels, ointments, or transdermal patches, across biological membranes. Here's how it's used: In Vitro Drug Release Studies: The Franz diffusion cell apparatus is primarily employed for conducting in vitro drug release studies. It consists of two compartments separated by a biological membrane (usually animal or human skin), with the test formulation applied to one side (donor compartment) and a suitable receptor medium (often a buffer solution) in the other side (receptor compartment). Membrane Permeation Studies: The apparatus allows researchers to investigate the permeation of drugs or active ingredients through biological membranes, mimicking the conditions encountered in vivo. By monitoring the concentration of the drug in the receptor medium over time, researchers can quantify the rate and extent of drug permeation across the membrane. Formulation Optimization: Pharmaceutical scientists use the Franz diffusion cell apparatus to evaluate the performance of different topical formulations and optimize their composition for enhanced drug delivery. Factors such as the type of excipients, formulation viscosity, drug concentration, and pH can be varied to assess their impact on drug permeation and skin penetration. Transdermal Patch Evaluation: For transdermal drug delivery systems, such as patches, the Franz diffusion cell apparatus is instrumental in assessing the release kinetics and permeation characteristics of drugs through the skin. This information is crucial for designing patches with optimal drug delivery profiles and ensuring therapeutic efficacy. Skin Penetration Studies: In addition to drug release, the Franz diffusion cell apparatus can be used to investigate the penetration of drugs or active ingredients into different layers of the skin. By analyzing samples collected from various depths within the skin, researchers can assess the distribution and localization of the drug following topical application. Bioequivalence Studies: The Franz diffusion cell apparatus is also utilized in bioequivalence studies to compare the performance of generic and reference topical formulations. By measuring the rate and extent of drug release and permeation, researchers can determine whether the generic formulation is therapeutically equivalent to the reference product.
