Medical equipments, Medical Product, Mask, Gloves, Antibacterial Hand gel, Antiseptic gel, Thermometer. etc. Certificate: (all certificates) FDA,ISO,FDA,etc. Payment: T/T, L/C. etc. Shipment: all types.
Latex Gloves, Medical Gloves, Certificate: FDA, CE, ISO. Payment: L/C 30%-70% , T/T. Shipment: DHL, Aircargo, etc,(how convenient it is for the client.).
Product name: Coverall type 4B/5B/6B
Elasticated hood around face.
Elasticated cuffs and ankles.
Elasticated sleeves.
Taped seams.
Zipper with re-sealable flap protecting leakage through seams.
Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards.
White color with blue tape
Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm
Lightweight, do not contain rubber/ latex.
Antistatic treated on both sides.
Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard)
Non-sterile
Single Use, disposable
Size: M-XL
Conforms to standards below:
European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards.
EN 13034:2005+A1
EN 14605
EN ISO 13982-1
EN 1073-2
EN ISO 13688
EN 1149-5
Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phiâ??X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard)
Performance requirement ISO standards:
EN 340 General requirements
EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test)
EN 14325 Test methods & performance classification
EN ISO 3758 (ISO 3758) Textile care symbols
EN ISO 13935-2 Seam strength
54 Medical Software Suppliers
Short on time? Let Medical Software sellers contact you.
General Description:
Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration.
Technical specifications
Product name: Coverall type 4B/5B/6B
Elasticated hood around face.
Elasticated cuffs and ankles.
Elasticated sleeves.
Taped seams.
Zipper with re-sealable flap protecting leakage through seams.
Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards.
White color with blue tape
Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm
Lightweight, do not contain rubber/ latex.
Antistatic treated on both sides.
Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard)
Non-sterile
Single Use, disposable
Size: M-XL
Conforms to standards below:
European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards.
EN 13034:2005+A1
EN 14605
EN ISO 13982-1
EN 1073-2
EN ISO 13688
EN 1149-5
Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by blood borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard)
Performance requirement ISO standards:
EN 340 General requirements
EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test)
EN 14325 Test methods & performance classification
EN ISO 3758 (ISO 3758) Textile care symbols
EN ISO 13935-2 Seam strength
Certificates
CE from notified body
ISO13485
Supplied with
Supplier's instruction for use
Shelf life : As indicated by supplier
Storage conditions : As indicated by supplier
Packaging and labelling : Individually packaged in a transparent plastic bag.
Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type, coverall performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Product name: Coverall type 3B
Elasticated hood around face.
Elasticated cuffs and ankles.
Elasticated sleeves.
Taped seams.
Zipper with re-sealable flap protecting leakage through seams.
Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards.
White color with blue tape
Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm
Lightweight, do not contain rubber/ latex.
Antistatic treated on both sides.
Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard)
Non-sterile
Single Use, disposable
Size: M-XL
Conforms to standards below:
European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards.
EN 13034:2005+A1
EN 14605
EN ISO 13982-1
EN 1073-2
EN ISO 13688
EN 1149-5
Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard)
Performance requirement ISO standards:
EN 340General requirements
EN ISO 17491-4: 2008 (supersedes: EN 468 mod. â?? Spray aerosol test)
EN 14325 Test methods & performance classification
EN ISO 3758 (ISO 3758) Textile care symbols
EN ISO 13935-2 Seam strength
General Description:
Non-fluid resistant respirator mask protecting against airborne pathogens. Anti-penetration high filtration mask
Technical specifications
Product Name: FFP2 Respirator with harness band
Material : 4-layer non-woven melt-blown fabric
Bacteria Filtration level: > 94 %
Air permeability: > 2 mm H2O
Shape : foldable without valve
Fits most face shapes, without inspiration/expiration air-leakage
Adjustable nose bridge strip (4 x 90 mm (w x l) (+/-10%))
Elastic ear straps, both fitting around the ears or optional fitting around the top of the head with support of harness band(included).
white colour
Non-sterile
Single-use, disposable
Each mask bares clear identification of
(i) protection provided FFP2,
(ii) which side to wear up (nose),
(iii) manufacturer's name, and
(iv) model reference
Conforms to standards:
EN 149: 2001/FFP2. The disposable respirator should be marked with the manufacturer's name, EN 149: 2001/FFP2 and CE certification number.
Certificate
CE from notified body
ISO13485
Supplied with
Supplier's instruction for use
Shelf life : As indicated by supplier
Storage conditions:
As indicated by supplier
Packaging and labelling:
Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
EARLOOP TYPE 5 PLY
BFEâ?¥95%
Product Name: FFP2 Respirator with harness band
Material: 5-layer non-woven melt-blown fabric
Bacteria Filtration level: > 94 %
Air permeability: > 2 mm H2O
Shape: foldable without valve
Fits most face shapes, without inspiration/expiration air-leakage
Adjustable nose bridge strip (4 x 90 mm (w x l) (+/-10%))
Elastic ear straps, both fitting around the ears or optional fitting around the top of the head with support of harness band(included).
white colour
Non-sterile
Single-use, disposable
Each mask bares clear identification of
(i) protection provided FFP2,
(ii) which side to wear up (nose),
(iii) manufacturer's name, and
(iv) model reference
Conforms to standards:
EN 149: 2001/FFP2. The disposable respirator should be marked with the manufacturer's name, EN 149: 2001/FFP2 and CE certification number.
Medical face masks, 3 and 4 ply medical masks, disposable masks, surgical masks, ffp2 masks, n95, kn95, coverall type 3 4 5 6, isolation gown, shoe cover, head cover, nitrile gloves like cardinals,.Export and import
Lug-type specification: 17.5cmx9.5cm, composed of the mask body +nose clip+mask belt . Storage conditions: Packaging stored in relative humidity less than 80%, a cool, dry and ventilated indoor epoxy ethane residues.no corrosive gas . take mask the elastic hanging above the ear respectively, on both sides of the nose clips will aim at the nose, with hand pinched nose clip molding, folding, and then open mask debugging till to plug the nose mouth, this mask is a disposable product, replace one after wearing 4 hours, and discard it after use.
stand: BFE :99%,PFE :99%, Polypropylene inner and outer facing assures comfortable on the inside and protection on the outside
Function:anti-coronavirus / prevent flu / anti smoke / dust
Remark suitable for medical person or related personnel, protect against respiratory diseases transmitted in the
air.The main functions are as follows:
1. The filtration level of the product for non oil particles is level 1, Greater than or equal to 95%;
2. Suction resistance shall not exceed 343.2pa;
3. The water level on the external surface shall not be lower than level 3;
4. According to the specified experimental method, meet the requirements of microbial indicators;
5. The materials used are not inflammable;
54 Medical Software Suppliers
Short on time? Let Medical Software sellers contact you.
