General Description: Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration. Technical specifications Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by blood borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength Certificates CE from notified body ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Individually packaged in a transparent plastic bag. Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type, coverall performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phiâ??X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength
Model No. & Name - Coverall With tapes Non-Sterile Material - Fabric: TPU or PP+PE 70±5gsm PB70 AAMI Level - Type 3 FOB Shanghai Price USD/pc - US$3.250 Estimate CIF by Air Price USD/pc - US$6.150 Order Quantity - 100,000 Pcs b. FOB Shanghai Price - US$3.300 USD/pc Estimate CIF by Air Price - US$6.200 USD/pc Order Quantity - 300,000 Pcs c. FOB Shanghai Price - US$3.250 USD/pc Estimate CIF by Air Price - US$6.140 USD/pc Order Quantity - 500,000 d. FOB Shanghai Price - US$3.200 USD/pc Estimate CIF by Air Price - US$6.080 USD/pc Order Quantity - 1,000,000 Pcs Packing - 40pcs/carton G.W 12kg/carton Ctn size (cm) - 60*40*40
Model No. & Name - Coverall With tapes Non-Sterile Material - "Fabric: TPU or PP+PE 70 + 5gsm PB70 AAMI Level - Type 4 a. FOB Shanghai Price USD/pc - US$3.250 Estimate CIF by Air Price USD/pc - US$6.100 Order Quantity - 100,000 Pcs b. FOB Shanghai Price - US$3.300 USD/pc Estimate CIF by Air Price - US$6.050 USD/pc Order Quantity - 300,000 Pcs c . FOB Shanghai Price - US$3.250 USD/pc Estimate CIF by Air Price - US$6.000 USD/pc Order Quantity - 500,000 Pcs d . FOB Shanghai Price - US$3.200 USD/pc Estimate CIF by Air Price - US$5.950 USD/pc Order Quantity - 1,000,000 Pcs Packing - 40pcs/carton G.W 12kg/carton Ctn size (cm) - 60*40*40
Model No. & Name - Coverall With tapes Non-Sterile Material - Fabric: TPU or PP+PE 70 + 5 gsm PB70 AAMI Level - Type 5 FOB Shanghai Price USD/pc - US$3.180 Estimate CIF by Air Price USD/pc - US$5.950 Order Quantity - 100,000 Pcs b . FOB Shanghai Price - US$3.100 USD/pc" "Estimate CIF by Air Price - US$5.850 USD/pc" Order Quantity - 300,000 Pcs c . FOB Shanghai Price - US$3.050 USD/pc Estimate CIF by Air Price - US$5.830 USD/pc Order Quantity - 500,000 Pcs d . FOB Shanghai Price - US$2.980 USD/pc Estimate CIF by Air Price - US$5.800 USD/pc" Order Quantity - 1,000,000 Pcs Packing - "40pcs/carton G.W 12kg/carton CTN size (cm) - 60*40*40
Model No. & Name - Coverall With tapes Non-Sterile Material - Fabric: TPU or PP+PE 70 + 5gsm PB70 AAMI Level - Fabric: TPU or PP+PE 70 + 5gsm FOB Shanghai Price USD/pc - US$3.100 Estimate CIF by Air Price USD/pc - US$5.950 Order Quantity - 100,000 Pcs b . FOB Shanghai Price - US$3.060 USD/pc Estimate CIF by Air Price - US$5.900 USD/pc Order Quantity - 300,000 Pcs c. FOB Shanghai Price - US$3.000 USD/pc Estimate CIF by Air Price - US$5.850 USD/pc Order Quantity - 500,000 Pcs d . FOB Shanghai Price - US$2.920 USD/pc Estimate CIF by Air Price - US$5.800 USD/pc Order Quantity - 1,000,000 Pcs Packing - "40pcs/carton G.W 12kg/carton Ctn size(cm) - 60*40*40
Face mask, noncontact thermometers, kn95.Brokers
Medical Ventilator (Model SH300/PA900B/SH200A/) Ventilation specification Tidal volume l:E Monitoring specification VTI, VTE , MV, MVspn Fspn, Frequency, l:E Ppeak, Pmean ,Pplat, Pmin, PEEP Ã¥·³02 Compliance, Resistance P-T, F-T, V-T, P-V loop, V-F loop 20-2500ml Ventilation mode : VCV, VCV +Sigh, PCV, PRVC, SIMV+VCV, SIMV+PCV, SIMV+PRVC ,SPONT (CPAP/PSV) , BIPAP, APRV NIV/CPAP, NIV/PCV 1:10-10:1 lnspiratorytime: 0.1-12 s Pause time Pressure trigger sensitivity Flow trigger sitivity PEEP/CPAP Psupp Pinsp Phigh Plow 02 suction Ins.Hold Exp.Hold Manual ventilation Waveform Freeze: Yes Nebulization C02(optional) ETC02(optional) Optional Air compressor Humifier Support arm 0-50% (PEEP-20 to OcmH20) 1 - 20LPM 0- 50cmH20 0- 70cmH20 5- 70cmH20 21-100% 0- 70cmH20 1 00% 02 ventilation for 2mins 15s Max 15s Max 0-60 minutes adjustable CE
3 ply face mask.
N95 mask.
Medical equipments, Medical Product, Mask, Gloves, Antibacterial Hand gel, Antiseptic gel, Thermometer. etc. Certificate: (all certificates) FDA,ISO,FDA,etc. Payment: T/T, L/C. etc. Shipment: all types.
Boaray 5000C/D Medical Ventilator We have EU CE
Medical Mechanic Ventilator ACM-812A Certificate: (all certificates) FDA,ISO,FDA,etc. Payment: T/T, L/C. etc. Shipment: all types.
Medical Equipment.
Medical face masks, 3 and 4 ply medical masks, disposable masks, surgical masks, ffp2 masks, n95, kn95, coverall type 3 4 5 6, isolation gown, shoe cover, head cover, nitrile gloves like cardinals,.Export and import
Product name: Coverall type 3B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. â?? Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength
General Description: Non-fluid resistant respirator mask protecting against airborne pathogens. Anti-penetration high filtration mask Technical specifications Product Name: FFP2 Respirator with harness band Material : 4-layer non-woven melt-blown fabric Bacteria Filtration level: > 94 % Air permeability: > 2 mm H2O Shape : foldable without valve Fits most face shapes, without inspiration/expiration air-leakage Adjustable nose bridge strip (4 x 90 mm (w x l) (+/-10%)) Elastic ear straps, both fitting around the ears or optional fitting around the top of the head with support of harness band(included). white colour Non-sterile Single-use, disposable Each mask bares clear identification of (i) protection provided FFP2, (ii) which side to wear up (nose), (iii) manufacturer's name, and (iv) model reference Conforms to standards: EN 149: 2001/FFP2. The disposable respirator should be marked with the manufacturer's name, EN 149: 2001/FFP2 and CE certification number. Certificate CE from notified body ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions: As indicated by supplier Packaging and labelling: Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Model No. & Name - FFP2 WITHOUT Valve Non-Sterile Material - EARLOOP TYPE 5 PLY BFE 95% White Color a . FOB Shanghai Price USD/pc - US$1.000 Estimate CIF by Air Price USD/pc - US$1.000 Order Quantity - 50,000 Pcs b . FOB Shanghai Price - US$0.545 USD/pc Estimate CIF by Air Price - US$0.996 USD/pc" Order Quantity - 100,000 Pcs c . FOB Shanghai Price - US$0.535 USD/pc Estimate CIF by Air Price - US$0.991 USD/pc Order Quantity - 200,000 Pcs d . FOB Shanghai Price - US$0.525 USD/pc Estimate CIF by Air Price - US$0.982 USD/pc Order Quantity - 500,000 e . FOB Shanghai Price - US$0.500 USD/pc Estimate CIF by Air Price - US$0.975 USD/pc" Order Quantity - 1,000,000 Pcs Packing - 400pcs/carton G.W:16kg/carton Ctn size(cm) - 55*50*29 Payment Term - 50% T/T in advance,50% before shippment, LC, can be negotiated Vaildity of price - 3 month Delivery Time - 5 - 15 Business Days Depends on the Order
Latex Gloves, Medical Gloves, Certificate: FDA, CE, ISO. Payment: L/C 30%-70% , T/T. Shipment: DHL, Aircargo, etc,(how convenient it is for the client.).
Medical mask.