PRODUCT: LIQUID HELIUM
Manufacture: PAO Gazprom, Russia
Physicochemical properties of liquid helium:
- helium volume fraction, not less than 99.9999%
- nitrogen volume fraction, not more than 0.000045%
- oxygen volume fraction in total with argon, not more than 0.000015%
- hydrocarbon volume fraction, not more than 0.00001%
- neon volume fraction, not more than 0.000015%
- hydrogen volume fraction, not more than 0.000005%
- water vapor volume fraction, not more than 0.000015%
Helium is one of the most sought-after noble gases. Due to its inertness, low boiling point and superfluidity, helium is widely used in high-tech industries, such as the rocket and space, nuclear and electronic industries, as well as in metallurgy .
The quality of liquid helium complies with Russian TU and all international standarts, including those in the field of environmental safety.
Delivery terms: FOB helium HUB Vladivostok, Russia
Quantity: 4.000 - 400.000.000 m3
The price of helium for export, the detaileld procedure, the size of the batch, are discussed with the end buyer or his official representative in the presence of a mandate from the buyer.
General Description:
Disposable protective shoe covers for chemical and biological protection
Technical specifications
Product Name : Disposable CPE shoe cover
Material : CPE 2.6g/pc
machine-made
Non-sterile
Permeability for air and water vapour
Elastic insert (at the ankle level)
The ability to retain up to 99% of solid particles larger than 1 micron
Material does not form pile and dust
Anti-slipping sole
Inseam: stitched
Size : 36-42
Supplied with
Supplier's instruction for use
Shelf life : As indicated by supplier
Storage conditions : As indicated by supplier
Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Product name: Coverall type 4B/5B/6B
Elasticated hood around face.
Elasticated cuffs and ankles.
Elasticated sleeves.
Taped seams.
Zipper with re-sealable flap protecting leakage through seams.
Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards.
White color with blue tape
Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm
Lightweight, do not contain rubber/ latex.
Antistatic treated on both sides.
Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard)
Non-sterile
Single Use, disposable
Size: M-XL
Conforms to standards below:
European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards.
EN 13034:2005+A1
EN 14605
EN ISO 13982-1
EN 1073-2
EN ISO 13688
EN 1149-5
Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phiâ??X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard)
Performance requirement ISO standards:
EN 340 General requirements
EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test)
EN 14325 Test methods & performance classification
EN ISO 3758 (ISO 3758) Textile care symbols
EN ISO 13935-2 Seam strength
Product name: Coverall type 3B
Elasticated hood around face.
Elasticated cuffs and ankles.
Elasticated sleeves.
Taped seams.
Zipper with re-sealable flap protecting leakage through seams.
Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards.
White color with blue tape
Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm
Lightweight, do not contain rubber/ latex.
Antistatic treated on both sides.
Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard)
Non-sterile
Single Use, disposable
Size: M-XL
Conforms to standards below:
European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards.
EN 13034:2005+A1
EN 14605
EN ISO 13982-1
EN 1073-2
EN ISO 13688
EN 1149-5
Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard)
Performance requirement ISO standards:
EN 340General requirements
EN ISO 17491-4: 2008 (supersedes: EN 468 mod. â?? Spray aerosol test)
EN 14325 Test methods & performance classification
EN ISO 3758 (ISO 3758) Textile care symbols
EN ISO 13935-2 Seam strength
General Description:
Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration.
Technical specifications
Product name: Coverall type 4B/5B/6B
Elasticated hood around face.
Elasticated cuffs and ankles.
Elasticated sleeves.
Taped seams.
Zipper with re-sealable flap protecting leakage through seams.
Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards.
White color with blue tape
Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm
Lightweight, do not contain rubber/ latex.
Antistatic treated on both sides.
Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard)
Non-sterile
Single Use, disposable
Size: M-XL
Conforms to standards below:
European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards.
EN 13034:2005+A1
EN 14605
EN ISO 13982-1
EN 1073-2
EN ISO 13688
EN 1149-5
Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by blood borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard)
Performance requirement ISO standards:
EN 340 General requirements
EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test)
EN 14325 Test methods & performance classification
EN ISO 3758 (ISO 3758) Textile care symbols
EN ISO 13935-2 Seam strength
Certificates
CE from notified body
ISO13485
Supplied with
Supplier's instruction for use
Shelf life : As indicated by supplier
Storage conditions : As indicated by supplier
Packaging and labelling : Individually packaged in a transparent plastic bag.
Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type, coverall performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
235 Food Chemicals Suppliers
Short on time? Let Food Chemicals sellers contact you.
we would like to offer you to expand your product range with 100% Pure Mountain honey with private labeling.
What are main features of Kyrgyz Honey?
- Honey collects in a mountain area in altitude of 900-4500 meters above sea level, where is no air pollution
- Not mixed with other varieties, flavors and additives
- Contains unique herbs
The Sonun Team, through its bee-keeping initiative, invites you to participate in a mutually beneficial collaboration. Buyers of our products are guaranteed quality supply and a reliable partnership that will drive profitability.
We are always happy to have new clients and always work with each client on an individual basis in the hope of establishing long-term business cooperation.
Kyrgyz honey has repeatedly gained admiration and accolades at the exhibition of International Bee-Keeping Congress in Apimondia.
We are proposing the supply of natural honey from bee gardens located in the ecologically wholesome mountainous Issyk-Kul and Naryn regions. Our honey, a product of Bishkek City in Kyrgyzstan, is famous for its excellent taste and high quality.
