Kenyan Shares Trading Software Suppliers and Manufacturers

Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.

Pure sulfuric acid does not occur naturally due to its strong affinity to water vapor; it is hygroscopic and readily absorbs water vapor from the air. Concentrated sulfuric acid is highly corrosive towards other materials, from rocks to metals, since it is an oxidant with powerful dehydrating properties. Phosphorus pentoxide is a notable exception in that it is not dehydrated by sulfuric acid but, to the contrary, dehydrates sulfuric acid to sulfur trioxide. Upon addition of sulfuric acid to water, a considerable amount of heat is released; thus, the reverse procedure of adding water to the acid should not be performed since the heat released may boil the solution, spraying droplets of hot acid during the process. Upon contact with body tissue, sulfuric acid can cause severe acidic chemical burns and even secondary thermal burns due to dehydration. Dilute sulfuric acid is substantially less hazardous without the oxidative and dehydrating properties; however, it should still be handled with care for its acidity.

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Base oils are important basic raw materials for any lubricants included engine oils, gear oils, industrial oils, metal working fluids, hydraulic fluids and also greases. In most of the lubricants 70-90% ingredient is base oils. As per API classification Base oils can be grouped majorly into five groups, i.e., Group-I/II/III/IV/V. The base oil characteristics are very important in determining the quality of the finished product. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.

Prilled urea is a form of nitrogen-rich solid fertilizer that has the ability to dissolve quickly in water. Prilled urea is more commonly used today to resist breaking down when mixing with other fertilizer components like Potassium chloride. It is also known as ice melting or deicing urea since it can reduce ice efficiently, even at very low temperatures.

Urea 46%, also known as urea fertilizer, is a commonly used nitrogen fertilizer and animal feed additive in the agricultural industry. This white crystalline solid is highly soluble in water, making it easy to apply to crops. Urea 46% provides plants with an essential source of nitrogen, which is crucial for their growth and development. However, like any agricultural input, urea 46% has its pros and cons. In this blog, we will explore the composition, production process, and practical applications of urea 46%, as well as its potential drawbacks and best practices for farmers. By understanding the benefits and limitations of urea 46%, farmers can maximize its potential and optimize crop production while minimizing environmental impact.

Base Oil SN 350 is a medium stock base oil produced from the vacuum distillates and residual components using the traditional refining methods. It has viscosity 8-9,5 cSt at 100C and 67-70 cSt at 40C. SN 350 is used in lubricant and lubricant additives production, mainly for industrial applications. The main benefits of SN 350 base oils are low sulphur content, high viscosity index, high oxidation stability and good susceptibility to the additives.

Base Oil SN 500 is defined as a light grade base oil at the upper end of the specifications for Grade I base oils. It is mostly used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base Oil SN 500 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils

Base oil SN 150 is known as a light grade base oil at the lower end of the specifications for Grade I light base oils. It is mostly used in lubricant and lubricant additives production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base oil SN 150 works as a base stock for several industrial lubricants. General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils

Bitumen penetration grade 40/50 bitumen means the penetration value is in the range 40 to 50 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 40 to 50. Bitumen is specified by the penetration and softening point test. Designing is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products. Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock. RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.