White Sesame Seeds Well Machine Cleaned - From Uganda
Grade : Sisal Fiber UG, SSUG, 3L, TOW Grade A Fiber type : Greige/Dyed Fiber size : 0.20 to 0.40mm diameter Fiber strength : 880 N Color : Natural Cream white, Brownish, Yellowish Length : 90cm-130cm Moisture : 10%-13% Purity : 98-99.5 % min Impurity : 0-3% max Texture : Eco-friendly, Fine finish, Smooth texture Place of origin : Kenya Packaging: Bales of 100kg/250kg in PVC Bags or Wooden Cases Minimum order : 20'' FCL (14 ton), 40'' FCL (28 ton)
2nd hand used cigarette-making lines.
2nd hand used cigarette making lines.
Blessed with a team of dexterous professionals, our organization counted as leading Exporter, Distributor, Supplier and Trading Company of Sisal Fiber UG Grade in Nairobi, Nairobi, Kenya. 100% natural sisal fiber Sisal fiber is strong and pliable, wear-resisting, alkali-resisting, corrosion-resisting. Therefore, the sisal fiber rope can be applied in many fields like transportation, fishery, oil industry, metallurgy etc. Sisal fiber: Grade A Length: 110cm-130cm Moisture: 10%-13% Impurity: 0-2% max Color: cream white cream, Brown
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom.[1][2][4] Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.[3] Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate. HMS 1/2 SCRAP / METAL SCRAP / HEAVY STEEL SCRAP / /Heavy Melting Steel Scrap Metals for sale. We can supply you HMS scraps, HMS 1, HMS 1/2, Used rails scraps. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% We have Used Rails | HMS 1:2 ISRI CODE R50-R65 Composition C - 0.54-0.82%, SI - 0.18-0.40%, MN - 0.60-1.05%, S - 0.04% maximum P - 0.035% maximum AS: - 0.01% Maximum of Mass Share HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% Used clean rail, without slag, dross, trash, wood, plastic, oily parts, grease, alloy, prohibited goods, whole sets of machine and usable parts for machines, cast iron, motor turning blocks, engine blocks, war and explosive for armour plated materials, mud or wastes and maximum harmless impurities is less than 0.1%;
Soybeans are oil seeds used worldwide for various uses mostly for making oil and products like Tofu, Flour, Milk etc. These are processed using high techniques of grading and sorting to use it directly for consumption procured from trustworthy farmer. Our range is widely consumed by large number of clients.
Urea 46%, also known as urea fertilizer, is a commonly used nitrogen fertilizer and animal feed additive in the agricultural industry. This white crystalline solid is highly soluble in water, making it easy to apply to crops. Urea 46% provides plants with an essential source of nitrogen, which is crucial for their growth and development. However, like any agricultural input, urea 46% has its pros and cons. In this blog, we will explore the composition, production process, and practical applications of urea 46%, as well as its potential drawbacks and best practices for farmers. By understanding the benefits and limitations of urea 46%, farmers can maximize its potential and optimize crop production while minimizing environmental impact.
Bitumen penetration grade 40/50 bitumen means the penetration value is in the range 40 to 50 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 40 to 50. Bitumen is specified by the penetration and softening point test. Designing is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on â??Iron Concentrate Particlesâ?? will summarize the progress achieved in the last five years.
Bitumen Penetration Grade 85/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RABIT Trading Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 85 to 100. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 85/100 is one of the most used bitumen grades and it�¢??s a basic material for all other bituminous products. Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.
Specifications: Sheet Size:210mm x 297mm, International Size A4 Quality: Imported 100% Virgin Wood Pulp Whiteness = 102-104%, Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 Cobb Test: 27-33 g/m2 27-33 multi-function A4 copy paper Basic weight - 70gsm, 75gsm, 80gsm Size - A4, A3, 8.5*11",8.5*13",11*17" Moisture - 3.5%-4.5% capapacity - >94% Brightness - 101-104% Place of Origin - Thailand Key Performance - No jam in photocopy machine Leave no dust in the copy machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides Been developed for Photocopy Machines,Laser Printers,Inkjet Printers,Fax Machines Packing - 500sheets/ream,5,8 or 10reams/carton PACKING DETAILS - 500 Sheets per Ream 5 Reams per Box 1560 Boxes per 20ft container( With Pallet) 1600 Boxes Per 20ft container( Without Pallet) 7800 Reams Total in one 20FCL( With Pallet) 8000 Reams Total in one 20FCL( Without Pallet)
Madagascar vanilla beans,vanilla beans kg,vanilla beans with best price Product Grade: A Black, plump and pliable Premium Black Vanilla Vanillin: 1,6 - 2,4% Moisture: 18-30% Length: 16-17cm (approx 6-7 inches) Vanillin Content: 1.9-2% Color: Dark Brown, almost Black Botanical Name: Vanilla Planifolia (BOURBON) Fragrance: Strong full rich Vanilla aroma Appearance : soft, fragrant,flexible vanilla beans Vanilla is a flavor derived from orchids of the genus Vanilla, primarily from the Mexican species Vanilla has very high aroma and very good taste . We blend Vanilla with some other herbals for our customer ,and packed it into the tea bag First of all,all of the photos below are AUTHENTIC,all of them were made by us, We have helped more than 70 companies create their own brands and herbal teas in the world, so we have rich experience to help our customers to avoid the "tortuous path", for example: Many companies only blend the formulas together for "SO-CALLED" herbal tea(Slim tea, detox tea....ect), this is false and irresponsible, Qdocean creats right and efficient herbal blending teas with specific technology. We will use our experience to make the high-end quality for the market.
Specification: Free Fatty Acids (% As Palmitic) : 5.0% Max. Moisture And Impurities (AOCS Ca 2c-25) : 0.1-0.25% Max. IODINE VALUE (Wijis) (AOCS Cd 1-25) : 50-55 Min. SLIP MELTING POINT (AOCS Cc3-25) : 33-39 C Max. COLOUR (Lovibond 5.25 cell) : 3.5R/3.5Y Max. DOBI : 2.31 Min Purity and freshness are the highlights of Crude Palm Oil, which we make available. This Crude Palm Oil is processed hygienically as per the set rules and regulations. We are rated as a dependable Manufacturer and Exporter of Crude Palm Oil. Packing Size: 1) PET Bottle 0.25L, 0.50L, 1L, 2L, 3L, 5L 2) HDPE Jerry Can 1L, 2L, 3L, 5L, 8L, 10L, 16L, 18L, 20L, 25L 3) Big Mouth HDPE Jerry Can 10L, 16L, 18L 4) Tin Can 16L, 18L, 20L 5) Steel Drum 190kgs 6) Plastic Drum 190kgs 7) Bag In Box 20L 8) Flexi Tank 21MT Quality:CP6, CP8, CP10
Ropes & Rope Products.
Hdpe twine and ropes.
Engine: cummins, cbm: 85.110, operating weight: 21, 700kg, bucket: 0.92m3, boom: 5.68m, arm: 2.92m, shoe: 600mm. Cbm: 85.110 Operating weight: 21, 700 kg Packing: export standard packing
