Kenyan Home Ironing Boards Suppliers and Manufacturers

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on â??Iron Concentrate Particlesâ?? will summarize the progress achieved in the last five years.

Our iron ore pellets and fines are made from magnetite and have high iron ore content â?? pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customersâ?? pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customersâ?? ironmaking processes.

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�¯�¿�½?�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�¯�¿�½?�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�¯�¿�½?�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�¯�¿�½?�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading

Copper Wire (Mill berry) Scrap. From electrical cable wires Cooper: 99.98% Min. Carbon: 0.03% Cobalt:

Aluminum Extrusion 6063 Scrap Aluminum Extrusion 6063 Scrap. It is the most common alloy used for aluminum extrusions. Normally, Aluminium Extrusion 6063 Scrap shall consist of clean aluminum profile extrusions including window, shop fittings, irrigation tubes and door frames. However, it must be free of screws, iron components, plastics, rubber or other foreign materials. Chemical composition Silicon minimum 0.2%, maximum 0.6% by weight Iron no minimum, maximum 0.35% Copper no minimum, maximum 0.10% Manganese no minimum, maximum 0.10% Magnesium minimum 0.45%, maximum 0.95% Chromium no minimum, maximum 0.10% Zinc no minimum, maximum 0.10% Titanium no minimum, maximum 0.10% Other elements no more than 0.05% each, 0.15% total Aluminium ; Remainder

Specifications: Product Name: Pistachios nuts Cultivation Type: Common Nutritional Values Per 100 gr. Energy (kcal) 642,7 Protein (g) 21,45 Total fat (g) 55,65 Unsaturated fat (g) 48,25 Satured fat (g) 7,4 Cholestrol (g) 0 Carbonhydrate (g) 10,016 Cellulose (g) 7,7 Iron (mg) 0,378 Potassium (g) 0,66 Sodium (g) 0,13 Feature: NON-GMO No food addtives Good for eyesight. Produce process: Selecting--Roasting--Seasoning--Selecting&metal detection--Packaging Taste:Salty, Crispy Shelf Life:12 months

HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate. HMS 1/2 SCRAP / METAL SCRAP / HEAVY STEEL SCRAP / /Heavy Melting Steel Scrap Metals for sale. We can supply you HMS scraps, HMS 1, HMS 1/2, Used rails scraps. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% We have Used Rails | HMS 1:2 ISRI CODE R50-R65 Composition C - 0.54-0.82%, SI - 0.18-0.40%, MN - 0.60-1.05%, S - 0.04% maximum P - 0.035% maximum AS: - 0.01% Maximum of Mass Share HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% Used clean rail, without slag, dross, trash, wood, plastic, oily parts, grease, alloy, prohibited goods, whole sets of machine and usable parts for machines, cast iron, motor turning blocks, engine blocks, war and explosive for armour plated materials, mud or wastes and maximum harmless impurities is less than 0.1%;

Specifications 1.Used cooking oil 2.bulk cooking oil 3.vegetable cooking oil 4.Acid oil 5.Crude Palm oil UCO available in : 1. 1-3 % FREE FATTY ACID 2. 3-5 % FREE FATTY ACID 3. 5-12 % FREE FATTY ACID 4.10 - 20 % FREE FATTY ACID IODINE VALUE ; 50 MOISTURE AND INPURITY VALUE : 0.1% PACKAGING 1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 1L, 1.8L, 2L, 3L, 5L 4) TIN : 18L , 20L 5) METAL DRUMS : 190KGS & 192KG 6) POLY/HDPE DRUMS : 195KGS 7) FLEXI TANK : 21,500KGMT we have a regular shipment of used cooking oil to various contries in Europe, we can provide UCO in different type grade of FFA. we have been doing this business since the last 3 year, we have a genuine certificate of of exporting this used cooking oil. UCO collected from Hotel, Palm oil, restaurant, Hospital, factory and home industry from all over indonesia. all UCO shipment shipped by container and ISO Tank, oil certificate test lab issued by official company such as SGS, SUCOFINDO

We are able to supply your company without any problem regards. We can readily supply you with very good quality and quantity with specifications below and also to inform you that right now is the new season . SPECIFICATIONS OF CASHEWNUTS:- Cultivation Type : Organic Processing Type : Dried Commodities : Cashew nut ww240, ww320, ww450, SW240, SW320 Count per lbs : 220 -240 Moisture: 3% - 5% Broken: 3% max Next low size : 10%max Second quality : 5% max Third quality: 1.5% max Light blemish whole : 1.5% max Light blemish pieces: 1.5% max Blemish Whole : 0.5% max Desert quality: 0.5% max Scapes: 1.0% max Adhering testa: 3.0/1.5% max Total defects: 8.0% PACKAGING -In PE bag: 50lbs(22.68kg)/carton -In PE bag: 2x10kg/ Carton -In PE bag: 2x 25lbs(11.34kg)/carton -In TIN : 2x25lbs(11.34kg)/ Carton -In TIN: 2x10kg/ Carton Flexi/ Vacuum plastic bag 22.68kg (50lbs) in 1 carton, 700 cartons/ Twenty foot container Tin box 10kg or 11,34kg net, 2 tin box in 1 carton, 700carton/ Twenty foot container As per Buyer's requirements List of documents for presentation once the prepayment is made by buyer: A full set of 3/3 originals plus 3 N/N copies of Ocean Bill of Lading made out Clean on Board -The B/L to be signed in original by the ships Master and blank issued or endorsed for the destination identification of the loaded cargo with the quantity expressed in CANS/METRIC TONS Quantity certificate and quality certificate plus 3 (THREE) copies as issued at loading port by an INDEPENDENT SURVEYOR COMPANY FIA or SGS , nominated by the Seller. Certificate of Origin plus 2 (TWO) copies countersigned by a local Chamber of Commerce. Original copies of Certificates of Health and Phytosanitary plus 2 (TWO) copies countersigned by competent government authority or Health Ministry/Department Signed Commercial Invoice based on the delivered quantity/quality, showing name of vessel, date of completing loading, quantity and state of delivery (3 original and 3 copies) Full set (1 Original and 1 copy) of Insurance Policy for 110 % of the Invoice Value. The Certificate of Insurance coverage with payment confirmation issued by Insurance Company Packing List showing gross/net weight (1 original and 3 copies) Kindly revert to us , as we look forward being your main supplier from East Africa.

We are able to supply your company without any problem regards. We can readily supply you with very good quality and quantity with specifications below and also to inform you that right now is the new season . SPECIFICATIONS OF CASHEWNUTS:- Cultivation Type : Organic Processing Type : Dried Commodities : Cashew nut ww240, ww320, ww450, SW240, SW320 Count per lbs : 220 -240 Moisture: 3% - 5% Broken: 3% max Next low size : 10%max Second quality : 5% max Third quality: 1.5% max Light blemish whole : 1.5% max Light blemish pieces: 1.5% max Blemish Whole : 0.5% max Desert quality: 0.5% max Scapes: 1.0% max Adhering testa: 3.0/1.5% max Total defects: 8.0% PACKAGING -In PE bag: 50lbs(22.68kg)/carton -In PE bag: 2x10kg/ Carton -In PE bag: 2x 25lbs(11.34kg)/carton -In TIN : 2x25lbs(11.34kg)/ Carton -In TIN: 2x10kg/ Carton Flexi/ Vacuum plastic bag 22.68kg (50lbs) in 1 carton, 700 cartons/ Twenty foot container Tin box 10kg or 11,34kg net, 2 tin box in 1 carton, 700carton/ Twenty foot container As per Buyer's requirements List of documents for presentation once the prepayment is made by buyer: � A full set of 3/3 originals plus 3 N/N copies of Ocean Bill of Lading made out Clean on Board -The B/L to be signed in original by the ships Master and blank issued or endorsed for the destination identification of the loaded cargo with the quantity expressed in CANS/METRIC TONS Quantity certificate and quality certificate plus 3 (THREE) copies as issued at loading port by an INDEPENDENT SURVEYOR COMPANY FIA or SGS , nominated by the Seller. Certificate of Origin plus 2 (TWO) copies countersigned by a local Chamber of Commerce. � Original copies of Certificates of Health and Phytosanitary plus 2 (TWO) copies countersigned by competent government authority or Health Ministry/Department � Signed Commercial Invoice based on the delivered quantity/quality, showing name of vessel, date of completing loading, quantity and state of delivery (3 original and 3 copies) Full set (1 Original and 1 copy) of Insurance Policy for 110 % of the Invoice Value. The Certificate of Insurance coverage with payment confirmation issued by Insurance Company Packing List showing gross/net weight (1 original and 3 copies) Kindly revert to us , as we look forward being your main supplier from East Africa.

We are able to supply your company without any problem regards. We can readily supply you with very good quality and quantity with specifications below and also to inform you that right now is the new season . SPECIFICATIONS OF CASHEWNUTS:- Cultivation Type : Organic Processing Type : Dried Commodities : Cashew nut ww240, ww320, ww450, SW240, SW320 Count per lbs : 220 -240 Moisture: 3% - 5% Broken: 3% max Next low size : 10%max Second quality : 5% max Third quality: 1.5% max Light blemish whole : 1.5% max Light blemish pieces: 1.5% max Blemish Whole : 0.5% max Desert quality: 0.5% max Scapes: 1.0% max Adhering testa: 3.0/1.5% max Total defects: 8.0% PACKAGING -In PE bag: 50lbs(22.68kg)/carton -In PE bag: 2x10kg/ Carton -In PE bag: 2x 25lbs(11.34kg)/carton -In TIN : 2x25lbs(11.34kg)/ Carton -In TIN: 2x10kg/ Carton Flexi/ Vacuum plastic bag 22.68kg (50lbs) in 1 carton, 700 cartons/ Twenty foot container Tin box 10kg or 11,34kg net, 2 tin box in 1 carton, 700carton/ Twenty foot container As per Buyer's requirements List of documents for presentation once the prepayment is made by buyer: A full set of 3/3 originals plus 3 N/N copies of Ocean Bill of Lading made out Clean on Board -The B/L to be signed in original by the ships Master and blank issued or endorsed for the destination identification of the loaded cargo with the quantity expressed in CANS/METRIC TONS Quantity certificate and quality certificate plus 3 (THREE) copies as issued at loading port by an INDEPENDENT SURVEYOR COMPANY FIA or SGS , nominated by the Seller. Certificate of Origin plus 2 (TWO) copies countersigned by a local Chamber of Commerce. Original copies of Certificates of Health and Phytosanitary plus 2 (TWO) copies countersigned by competent government authority or Health Ministry/Department Signed Commercial Invoice based on the delivered quantity/quality, showing name of vessel, date of completing loading, quantity and state of delivery (3 original and 3 copies) Full set (1 Original and 1 copy) of Insurance Policy for 110 % of the Invoice Value. The Certificate of Insurance coverage with payment confirmation issued by Insurance Company Packing List showing gross/net weight (1 original and 3 copies) Kindly revert to us , as we look forward being your main supplier from East Africa.

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 - 1.05% Si : 0.13 - 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client's satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer's final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller's nominated bank account within 48 hours after receipt of the final assay report from buyer's inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading