Used cooking oil Measurements shall be carried out after extraction from the lower part. 1) Total acid number - Less than 5 (Test Method - KS M ISO 6618) 2) Iodine water - g 12/100g (Test Method - KS M ISO 12937) 3) Water and Sediment - Weight % -More than 100 (Test Method - KS H ISO 3961) Water average: Lower layer result x 0.05 + Upper layer result x 0.95 FFA: Max 5% MI&U: Max 2% Iodine Value: min. 90 Sulfur: less than 30ppm
Product Type: Fresh Spicy Mature Ginger Size:100g/150g/200g/250g/300g Place of Origin:kenya Supply Time: All Year Rounds Ginger Loading: 25~28tons/40HQ Terms of Payment: 30%-50% advance payment by T/T and the balance against the copy of B/L Delivery of Ginger: Within 10 days after receiving the payment Certification: HACCP,ISO, Global Gap
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Material Origin : Car Battery / Van Battery / marine batteries and industrial traction batteries. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. . Automotive Waste Batteries completely washed, cleaned with lead acid contents. RAINs per ISRI Specifications) (Product Detailed SpecWET/DRY WHOLE INTACT CAR LEAD BATTERIES(RINKs and ifications) height :116mm and whight :310 gr height :123mm and whight :350 gr Used Auto Battery Scrap Drained lead battery scraps Lead Battery Plate Scrap Type Battery Scrap 20D 16H Lead Battery Plates Scrap Lead Battery Plate Scrap Type soft lead scrap Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
We are supplier of frozen pork meat Frozen Pork Sparerib Specification: Skin-off, bone-in, with tender loin and ribs 4-6cm in width,fat tissue not exceeding 0.5cm. Packing:In cartons of 25kg net each. Frozen pork liver Specification: Without veins, fat and gall, fresh in quality and neat in appearance. Packing: 4 boxesX5kg to a carton. Frozen pork Heart Specification: Washed and drained, without veins and bloodstain, fresh in quality and neat in appearance. Packing: 4 boxes to a carton of 20kg. Frozen pork Kidney Specification: Fat and external membrance removed, fresh in quality and neat in appearance. Packing: 4 boxes to a carton of 20kg. Frozen pork spleen Specification: Fresh in quality, well-frozen and with a slight amount of fat left. Packing: 4 boxes(polybags)X5kg to a carton of 20kg. Frozen pork stomach(cooked) Specification: Fresh in quality, clean and neat,boiled and well-frozen. Packing: In carton of 20kg net each. Frozen pork trotter Specification: Fresh in quality and neat in appearance. Packing: In carton of 20kg net each. Frozen pork intestines Specification: Fresh, well-trimmed and washed, 80-150 cm in length each. Packing: In carton of 20kg, 5000gX4 boxes each. Frozen Pork Meat Specification: Without skin, fat and bones; each half carcass cut into the following four piecse: 1.Nape: Each piece weighing 0.8kg net min. 2.Shoulder: Each piece weighing 1.35kg net each min. 3.Loin: Each piece weighing 0.55kg net each min. 4.Leg: Each piece weighing 2.2kg net each min. With slight fat left on each piece of meat. In each carton, one piece of meat weighing less than the above stipulation is allowed. Packing:Packed separately in cartons weighing 25kg net each, lined with a polythene bag. Frozen Pork Sparerib Specification: Skin-off, bone-in, with tender loin and ribs 4-6cm in width,fat tissue not exceeding 0.5cm. Packing:In cartons of 25kg net each. Frozen pork liver Specification: Without veins, fat and gall, fresh in quality and neat in appearance. Packing: 4 boxesX5kg to a carton. Frozen pork Heart Specification: Washed and drained, without veins and bloodstain, fresh in quality and neat in appearance. Packing: 4 boxes to a carton of 20kg. Frozen pork Kidney Specification: Fat and external membrance removed, fresh in quality and neat in appearance. Packing: 4 boxes to a carton of 20kg. Frozen pork spleen Specification: Fresh in quality, well-frozen and with a slight amount of fat left. Packing: 4 boxes(polybags)X5kg to a carton of 20kg. Frozen pork stomach(cooked) Specification: Fresh in quality, clean and neat,boiled and well-frozen. Packing: In carton of 20kg net each. Frozen pork trotter Specification: Fresh in quality and neat in appearance. Packing: In carton of 20kg net each.
VG-20 bitumen is a grade of viscosity bitumen used in cold climatic and high altitude regions. This grade of bitumen is suitable for road construction in regions with 30 to 37 C average temperature. In North India, vg20 is used for road construction in hot mix asphalt. The standard penetration value of bitumen viscosity grade VG-20 is 60 mm at 25 C. The absolute viscosity of VG-20 bitumen is 1600 to 2400 poise at 60 C.
Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products. Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock. RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom.[1][2][4] Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.[3] Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
VG10 bitumen is the softest grade of viscosity bitumen. This type of bitumen is widely used for spraying applications and surface coating. VG 10 bitumen means that your bitumen is also suitable for paving roads in a very cold climate instead of the old 80/100 penetration grade. The air temperature that matches VG10 bitumen ranges from -10 â?¦C to 25 â?¦C. Due to the high temperatures in hot climatic zones, the application of VG10 cannot provide desirable rutting resistance. This type of bitumen is also used to manufacture bitumen emulsions and modified bitumen products especially in India. As a viscosity grade bitumen, VG10 has a better performance incold weather. To know vg10 latest price contact us.
Bitumen penetration grade 40/50 bitumen means the penetration value is in the range 40 to 50 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 40 to 50. Bitumen is specified by the penetration and softening point test. Designing is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
Bitumen Penetration Grade 85/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RABIT Trading Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 85 to 100. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 85/100 is one of the most used bitumen grades and it�¢??s a basic material for all other bituminous products. Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.
Pure sulfuric acid does not occur naturally due to its strong affinity to water vapor; it is hygroscopic and readily absorbs water vapor from the air.[6] Concentrated sulfuric acid is highly corrosive towards other materials, from rocks to metals, since it is an oxidant with powerful dehydrating properties. Phosphorus pentoxide is a notable exception in that it is not dehydrated by sulfuric acid but, to the contrary, dehydrates sulfuric acid to sulfur trioxide. Upon addition of sulfuric acid to water, a considerable amount of heat is released; thus, the reverse procedure of adding water to the acid should not be performed since the heat released may boil the solution, spraying droplets of hot acid during the process. Upon contact with body tissue, sulfuric acid can cause severe acidic chemical burns and even secondary thermal burns due to dehydration.[7][8] Dilute sulfuric acid is substantially less hazardous without the oxidative and dehydrating properties; however, it should still be handled with care for its acidity.
VEGETABLE COOKING OIL RBD PALM OLEIN RBD Palm Olein is the liquid fraction obtained by the fractionation of palm oil after crystallization at controlled temperatures It is especially suitable for frying and cooking Main applications of RBD Palm Olein include salad and cooking oils in households industrial frying fat of instant noodles potato chips doughnuts and condensed milk GLOBAL INTELLECT VENTURES SDN BHD produces several brands of cooking oil such as FATIM GLOBAL ELLAMIAMIA GOLDEN OIL We also contract produce and package for customers using their own brandsRBD Palm Olein is cholesterolfree and contains vitamin AD and E It has high stability to oxidation and is nutritionally healthy with a balanced composition Emulsifying agents may be added along with permitted colors flavors and other ingredients as desired to suit final product application Our quality standard is in accordance to Palm Oil Refiners Association of Malaysia PORAM Quality standard CP10 QUALITY C CP8 QUALITY B CP6 QUALITY A We can also offer the quality in accordance to IV56 IV57 IV58 IV60 and IV64 The premium quality 100 pure refined vegetable cooking oil RBD Palm Olein extracted from palm oil Rich in vitamin A D E zero cholestrol With no artificial addictive or preservative and Trans fat free Benefit Pure natural goodness rich in Vitamin E A and D Zero Cholesterol With no artificial additive or preservative and Trans fat free refined RBD palm oil for cooking Product CODE Product Description CHEMICAL PROPERTIES PHYSICAL PROPERTIES PACKING IODINE VALUE WIJS g l2 100g FREE FATTY ACID AS PALMITIC MOISTURES IMPURITIES Peroxide Value MEQkg MELTING POINT C Color 5 LOV Max Cooking oil RBDP Olein IV 56 56 Min 01 Max 01 Max 1 max 24 max 3R Jerrycan RBDP Olein IV 58 58 Min 01 Max 015 Max 1 max 9 max 3R Jerrycan We provide premium grade of Palm Cooking Oil in from 5 Liter to 20 Liter onward in jerry can pete Bottle tin drum etc We provide all type of packaging for Palm Cooking Oil from 1 Liter to 25 Liter We supply all types of Palm Cooking Oil CP6 to CP10 We own a factory and provide OEM service for packaging We have PETE bottle Jerry Can Plastic or Steel Drum Flexi bag or Flexi tank We can offer very good and reasonable price for importers
REFINED SOYBEAN OIL Type Soybean Oil Product Type Fruit Oil Processing Type Refined Cultivation Type Common Use Cooking Grade Premium Place of Origin Thailand Appearance transparent light yellow oily liquid without visible impurities Purity 100 Luster PtCo 180 380 Epoxide number 60 55 Iodine number 60 80 Acidity mgKOHg 050 060 Flash point C 280 270 Density 20C gcm3 09880998 09880998 Loss on heating 030 050 Soyabean oil is a nutritious and delicious cooking oil also providing a rich source for vitamin E which can reduce the risk of heart disease 100 Refined Soybean Oil Grade A Soya oil contains high levels of polyunsaturated fats which break down when heated Specifications Free Fatty Acid 005 01 Peroxide Value meqkg 05 10 meqkg Refractive Index 40oC 14666 147 Iodine Value Wijs 123 139 Moisture 005 01 Cold Test 55 hrs OSI 110oC 55 60 hrs Saponification Value 191 192 Specific Gravity 25oC 0915 0925 Smoke Point 460 465oF Flash Point 650 655oF Fire Point 690 695oF Soybean oil has always been a popular oil for cooking as an inexpensive healthy oil with a high smoke point It contains higher levels of polyunsaturated fats than other oils such as rapeseed giving our Soybean oil the special character of healthy oil Soyabean oil is a nutritious and delicious cooking oil also providing a rich source for vitamin E which can reduce the risk of heart disease SOYABEAN OIL Taste Neutral Impurities Negative Free Fatty Acid max 010 Moisture max 005 Peroxide Value meq O2 kg max 5 Specific gravity at 20 degr C 091 093 Iodine value g 100 g 125 140
REFINED SOYBEAN OIL Type Soybean Oil Product Type Fruit Oil Processing Type Refined Cultivation Type Common Use Cooking Grade Premium Place of Origin Thailand Appearance transparent light yellow oily liquid without visible impurities Purity 100 Luster PtCo 180 380 Epoxide number 60 55 Iodine number 60 80 Acidity mgKOHg 050 060 Flash point C 280 270 Density 20C gcm3 09880998 09880998 Loss on heating 030 050 Soyabean oil is a nutritious and delicious cooking oil also providing a rich source for vitamin E which can reduce the risk of heart disease 100 Refined Soybean Oil Grade A Soya oil contains high levels of polyunsaturated fats which break down when heated Specifications Free Fatty Acid 005 01 Peroxide Value meqkg 05 10 meqkg Refractive Index 40oC 14666 147 Iodine Value Wijs 123 139 Moisture 005 01 Cold Test 55 hrs OSI 110oC 55 60 hrs Saponification Value 191 192 Specific Gravity 25oC 0915 0925 Smoke Point 460 465oF Flash Point 650 655oF Fire Point 690 695oF Soybean oil has always been a popular oil for cooking as an inexpensive healthy oil with a high smoke point It contains higher levels of polyunsaturated fats than other oils such as rapeseed giving our Soybean oil the special character of healthy oil Soyabean oil is a nutritious and delicious cooking oil also providing a rich source for vitamin E which can reduce the risk of heart disease SOYABEAN OIL Taste Neutral Impurities Negative Free Fatty Acid max 010 Moisture max 005 Peroxide Value meq O2 kg max 5 Specific gravity at 20 degr C 091 093 Iodine value g 100 g 125 140
Olive oil is a liquid fat obtained by pressing whole olives, the fruit of Olea europaea, a traditional tree crop of the Mediterranean Basin, and extracting the oil. It is commonly used in cooking, for frying foods or as a salad dressing. Our sunflower oil are selected light yellow seeds, light flavor and aroma, perfectly suited to today, especially suitable for use in cold sauces and seasonings, making it ideal for light diet consumption, healthy and balanced. REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Color: Max.1.2 red, Lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 Types of Oil available: -Refined Corn Oil -Refined Sunflower Oil -Refined Soybean Oil -Refined Canola Oil -Refined Cottonseed Oil -Refined Peanut Oil
Refined Corn oil is a liquid oil suitable for cooking baking frying in making margarine or our refined corn oil can be bottled as a general purpose oil especially for products high in polyunsaturated fatty acids We export this oil worldwide using customized shipping procedures WE sell this high quality oil at very affordable price we follow a strict procurement procedure that make sure all our partners meet all food and health requirement in place We sell refined corn oil in 1L 2L 5L 10L and different packaging options can be arranged upon request Below are some useful details on the specifications However you can contact us not for more details We are a dependable brand affianced in selling refined and crude Corn Oil across the boundaries Specifications for Refined Corn Oil Relative density 09170925 Refractive index at 40oC at 25oC 1465014680 14740 14700 Humidity and volatile substances Max 020 at 105 0C Insoluble impurities including corn seed germ Max 050 Saponification value mg potassium hydroxide g oil 187 193 Unsaponifiable matters g kg max 150 Soap content max 0 005 Total acidity as oleic acid max 03 Acid value mg potassium hydroxide g oil max 06 Peroxide value ml equivalent active oxygen kg oil max 100 Iodine value Wijs method 103 128 Acid Caproic acid C06 None Caprylic acid C08 None Capric acid C010 None Lauric acid C010 None 03 Myristic acid C014 None 03 Palmitic acid C016 86 165 Palmitoleic acid C116 None 05 Heptadecenoic acid C017 None 01 Heptadecenoic acid C117 None 01 Stearic acid C018 None 33 Oleic acid C118 200422 Linoleic acid C218 340655 Linoleic acid C318 None 20 Arachidic acid C020 0310 Gadoleic acid C120 0206 Eicosadienoic acid C220 None01 Behenic acid None 05 Bihenic None 05 Erucic acid C122 None 03 Docosadienoic C222 None Lignorceric acid C024 None 05 Nev Storage conditions Packed unopened in cool dry and dark environment Bulk dark stainless steel tanks max 30 degrees Celsius and loading in a clean tank Package and Storage
Printing Material, Polyester Plates, Polyester Film, Offset Plates, CTP Thermal Plates, UV CTCP Plates, Damper Covers, Offset Blankets, Cutting Sticks, Fountain Solutions, Plate Cleaner, Aragum , Spray Powder, Photocoate For Screen Printing Etc.
Plate Pot