Kenyan 4 Ply Face Mask Suppliers and Manufacturers

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Total nitrogen content by weight (on dry basis): minimum 46% Biuret content by weight: maximum 1.5% Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and be retained on 2 mm IS sieve. Not more than 5% shall be below 1 mm IS sieve Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost Each bag to guarantee minimum product weight (net) as specified on the bag

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom.[1][2][4] Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.[3] Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Copper Scrap Copper Wire And Pipe Scraps for Sale. Type: copper wire Chemical Formula: Cu M.P.: 1083.4 �°C Density: 8.82g/cm3 Specifications scrap copper wire 1.Scrap copper wire 2.Cu up to 99.99% 3.Competitive price+High quality 4.Excellent service 5.Small order is acceptable Copper Scrap CERTIFICATE OF ANALYSIS Item Standard Result Cu% 99.9 min 99.99 Sb% 0.002max 0.001 As % 0.002max 0.0006 Fe% 0.005 max 0.0012 Ni% 0.002 max 0.0008 Pb % 0.005max 0.0025 Sn% 0.002max 0.0007 S% 0.005max 0.003 O% 0.002max 0.001 Zn% 0.005max 0.002 P% 0.001max 0.0002

Specifications 1.Used cooking oil 2.bulk cooking oil 3.vegetable cooking oil 4.Acid oil 5.Crude Palm oil UCO available in : 1. 1-3 % FREE FATTY ACID 2. 3-5 % FREE FATTY ACID 3. 5-12 % FREE FATTY ACID 4.10 - 20 % FREE FATTY ACID IODINE VALUE ; 50 MOISTURE AND INPURITY VALUE : 0.1% PACKAGING 1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 1L, 1.8L, 2L, 3L, 5L 4) TIN : 18L , 20L 5) METAL DRUMS : 190KGS & 192KG 6) POLY/HDPE DRUMS : 195KGS 7) FLEXI TANK : 21,500KGMT we have a regular shipment of used cooking oil to various contries in Europe, we can provide UCO in different type grade of FFA. we have been doing this business since the last 3 year, we have a genuine certificate of of exporting this used cooking oil. UCO collected from Hotel, Palm oil, restaurant, Hospital, factory and home industry from all over indonesia. all UCO shipment shipped by container and ISO Tank, oil certificate test lab issued by official company such as SGS, SUCOFINDO

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated