Car starter cutting machine is used to cut off the copper wire of a section of the rotor commutator, which is the first procedure of dismantling the rotor of a car starter, main function is cutting the motor rotor for better recycling copper from the motor. Our motor copper recycling machine from famous is mainly used for waste car motor starter recycling, for the processing starter motor mainly consists of motor scrap cutting machine, car starter heating machine and car starter puller machine, this 3 machine will cooperate and complete the recycling process, disassembly operations on the used car motor starters that will not be in normal use. Machine Processing efficiency: more than 350pcs/h Machine Weight: 200kg Package Weight: 230kg Machine Size: 0.8 0.8 1.55m Package Size: 0.9 0.9 1.65m Machine Power: 3KW
This is our newly developed compressor casing removing machine, especially used for cutting and removing compressor shells. How do you scrap a compressor First you need to use this compressor casing removing machine to remove the shell and then use our compressor recycling machine to cut motor stator and pull all the copper winding wires from the waste motor. In the end you will get all the copper winding wires with no copper loss. Process Range: Compressor length under 12cm Compressor outer diameter from 12to 26cm Machine Size: 1930*880*1380MM Machine Weight: 820KG Machine Power: 6.2KW Machine Voltage: Support customization Machine Frequency: Support customization
BS-F1000 copper wire chopper machine is on sale, separating copper from plastic. Seeing is believing, as shown, the BS-F1000 copper chopper machine works very well for separating copper. All treatment process is automatic, saving time and labor cost. N series copper recycling machines account for 70% of the market in because of high machine quality and high copper separating rate, so do you like this model
How to process scrap motor for copper If that bothers you, no worry, we will provide you suitable solution. This working video show you our electric motor wrecker machine working process: Pulling and recycling copper from scrap motor stator quickly and efficiently. Better recycling copper from stator, you need to do as follows: 1: Cut motor stator in the first step; 2: Pull and recycle all copper winding wires from stator;
Want to process and recycle your scrap PCB boards Look here, new finished PCB recycling machine is in hot selling, are you interested How do you scrap a PCB This PCB recycling machine from our BSGH factory is useful for you, crushing and separating metal and nonmetal from waste PCB boards. This PCB separator machine is a kind of multi-function metal recycling machine, not only separating scrap PCB boards but also separating copper and plastic from cable wires. Has high machine quality and good machine performance; The processing capacity of this PCB board recycling machine is about 200kg per hour; The technical data of this PCB separating recycling machine: PCB processing capacity: 200kg/h Cable wire processing capacity: 200-300kg/h Machine size: 2290*1825*2100mm Motor power:15.99KW
Do you have a scrap ceiling fan motor stator that needs to process Which machine is used in cutting your ceiling fan This is a new model ceiling fan stator cutting machine working video, cutting copper winding wires for copper scrap recycling. Using this useful ceiling fan stator cutting machine, you can cut and recycle copper from the motor stator quickly and efficiently, useful and convenient. Motor power is about 3KW and machine weight is about 267kg. Are you interested in this new ceiling fan motor cutter
Transformer recycling machine is mainly used to recycle a variety of small transformers. First, the scrap transformer is cut in half by a cutter of the transformer cutting machine, and then the puller of the transformer pulling machine pulls out copper winding from the processed transformer to complete the whole copper winding wires recovery. Transformer cutting pulling machine details: Name: Electric Transformer Breaking Machine Machine Weight: 240kg Package Weight: 300kg Machine Size: 120*73*123cm Package Size: 84*110*85cm Transformer recycling machine advantages: 1. Mainly used to deal with small used transformers; 2. Small size and high efficiency; 3. Save time and effort, also has a low price;
How do you scrap your ac compressor Air conditioner compressor recycling machine help you, as shown in this video, our new model is cutting this thin long compressor to remove its shell. This new model compressor removing machine has total four blades, when machine working, these four blades working together for cutting and removing motor shell. Do you want to recycle copper from your scrap compressor
BS-N125 copper wire granulator machine from the BSGH factory is a multifunctional copper recycling machine, that not only can process copper wires and aluminum wires, but also can process small radiators, transformers, fuses, and cable plugs. As a copper wire granulator machine BS-N125, first crushing the wasted copper wires, then separate the copper and plastic 100% and the separating rate can reach up to 99.9%. Output can be as higher as 3000-4000 kg per day. And you will get pure copper and pure plastic in the end. Technology data of copper cable granulator machine show for you: Model: BS-N125 Processing dimension: Below 20mm Machine Capacity: 300-500KG/H Machine weight: 3200KG Machine size: 390*200*225CM Motor power: 40.5KW Motor voltage: 380V/customized If you need to separate and recycle your copper wire, this copper recycling machine fits you well. Are you interested in making money by recycling copper from wires?
Our D series cheap copper granulator machine is working, and this testing video show you the machine details and the working process. a professional copper recycling machine provider, and we supply high-quality copper recycling machines and the best services to our clients. D series copper wire recycling machine has small and medium processing capacity and has cheap prices, economical and practical. Do you like this model wire granulator
Is motor worth recycling Of course, it is worth to recycle copper winding wires from scrap motor. This new finished ST-400 motor cutting pulling machine is being tested for our Slovenia client. ST-400 motor cutting pulling machine, one kind of motor recycling machine, mainly used to cut and pull copper winding wires from motor stator. Processing range(motor diameter) is 90-260mm; Safe and high efficiency, very popular in Europe copper recycling field
Large capacity copper cable granulating machine BS-A1100 is our BSGH largest capacity copper wire recycling machine, which can process almost all types of waste cables with a capacity of 1.5-2T per hour. BS-A1100 copper cable granulator machine adopts an automatic pusher system for feeding scrap wires and forklift loading and feeding electric wires Instead of traditional manual feeding, feeding amount is large at a time and feeding speed is fast. A fully automatic operating system makes our wires copper recycling machine only need 1-2 skilled workers to operate too quickly and efficiently separate copper and plastic from waste cables so as to let you get the pure copper and pure plastic in the end. Technology data of copper cable recycling machine: Model: BS-A1100 Processing capacity: 1.5-2T/H Separation rate: 99.9% Machine weight: 17tons Motor Power: 128KW Motor Voltage: 380V/220V/customized
A car starter pulling machine is used in the final step of car starter dismantling, pulling out the copper winding from the scrap motor stator. After the insulating film melts, the copper wire pulling machine pulls copper wires from never cuts the stator side and complete dismantling and copper recycling of the entire automobile starter. Technical data of car starter puller machine: Machine Processing Efficiency: More than 350pcs/h Machine Weight: 460kg Package Weight: 500kg Machine Power: 4KW
Car starter heating machine is a kind of motor wrecker machine and is designed for recycling car starter motor. Car starter heating equipment is mainly used for rapid heating, and melting insulating film to cooperate with car starter pulling recycling machine to pull out copper winding wires because rotor copper wire is wrapped with a layer of the insulation film, which has a strong bonding effect. And this motor wrecker machine needs to be heated quickly by high-frequency heating equipment to melt the insulation film and facilitate copper winding wires pulling out to achieve scrap copper recycling. Technical data of this car starter recycling machine: Machine Name: Car starter heating machine Machine Processing Efficiency: More than 350pcs/h Machine Weight: 236kg Package Weight: 270kg Machine Size: 1.2 1.2 1.35M Package Size: 1.3 1.3 1.45M Machine Power: 85KW
BSM-10 motor stator pulling machine is a multifunctional machine for motor copper recycling that integrates two functions of cutting motor and pulling copper winding wires. Cutting parts of the motor recycling machine can cut scrap motor, pulling parts of electric motor wrecker can pull copper winding from used motors and 3 pulling parts are suitable for different sizes motors. Motor stator recycling machine can deal with the waste motor in the range of 50-500mm, which has a large processing range and strong function, and motor wrecker machine capacity is about 60-180 pieces motors per hour, high efficiency Cutting part: cut the motor stator range 50-180mm , hydraulic copper cutter, can cut off the stator one side copper wire; Puller 1#: pulling the motor stator range 50-180mm, hydraulic copper pulling, grasp the copper winding from one side; Puller 2#: pulling the motor stator range 50-140mm, hydraulic copper pulling, grasp the copper winding from one side; Puller 3#: Pull the motor stator 150-500mm, elevator, big size motor stators, use these working parts, same grasp the copper winding out. Technical data of motor copper recycling machine: Model: BSM-10 motor stator pulling machine Processing motor range: 50-500MM Machine gross weight: 690kg Machine net weight: 670kg Machine size: 2400*1100*1300 Motor power: 5.5KW Motor voltage: 380V /customized
Small copper wire granulator machine BS-D75 is used to separate copper granules and plastic granules from waste cable wires. This new model copper granulator machine has a small capacity and small size, very very fit for home use. This mini copper wire granulator machine BS-D75 processing capacity is about 50-80kg per hour, has a quick processing speed, and has high work efficiency. If you need a copper wire recycling machine to process wires in your home, this model mini cable granulator machine fits you well. Technical data of copper wire granulator machine: Machine Model: BS-D75 copper wire recycling machine Process Cable Diameter Range: Below 25mm Machine Capacity: 80-100KG/H Machine Weight: 1500kg Machine Size: 1700*1600*2200mm Motor Power: 18KW Advantages of small copper recycling machine: 1. Has mini size, mini capacity, and low noise, fit for home use; 2. High copper separating rate, and this model copper recycling machines copper separating rate can reach 99.9%; 3. Has the lowest price because of factory direct sale, fit for wholesale; 4. Automatic, save time and manpower for you; 5. The final product is pure copper and pure plastic, makes lots of money for you; Do you need to recycle your copper wires
Bestseller cable granulator machine BS-D20 is used to process waste cables that cannot be processed by a wire stripping machine, including automobile cables, communication cables, scrap wires, electric wires, and other cables diameter within 25mm. Copper and plastic are vibrated and separated by an air separator and vibrating tables after crushing, which can completely separate copper and plastic, and achieve the purpose of recycling waste cables. Of course, you also can add an electrostatic separation device on a copper wire granulator machine that can make the recovery rate of scrap copper close to 100%, which brings high economic benefits. Technical data of cable granulator machine: Model: BS-D20 Processing dimension: Below 20mm Machine Capacity: 200KG/H Machine weight: 1600KG Machine size: 2700*1700*2100mM Motor power: 28KW Motor voltage: 380V/220V/customized Welcome to know more about this small cable granulator machine
The electric motor puller machine from the a kind of copper recycling machine, used to pull all the copper winding wires from the motor stator. BSM-30 electric motor puller machine often works together with copper motor cutting machine, better recycling all the copper winding wires from the waste motor stator. Technology data of copper motor pulling machine: Machine model: BSM-30 Machine size: 2310*770*950mm Machine weight: 395kg Packing size: 2010*820*1050MM Packing weight: 420kg
BSM-40 motor wrecker machine is used to recycle copper from the motor, has multi-function, and can cut and pull copper from motors. These three pulling parts are fit for recycling different kinds of scrap motor, and this motor wrecker machine can process the motor stator diameter is 50-500mm. Electric Motor Stator Recycling Machine Technical Data: Machine Name: Electric motor stator recycling machine Machine model: BSM-40 Motor Power: 5.5KW Machine Size: 1940*1430*1150MM Machine Weight: 670kg Are you interested in this motor recycling machine BSM-40
Car starter heating recycling machine is mainly used for rapid heating, melting insulating film to cooperate with car starter pulling recycling machine to pull out copper winding wires, because rotor copper wire is wrapped with a layer of insulation film, which has a strong bonding effect. And it needs to be heated quickly by high-frequency heating equipment to melt the insulation film and facilitate copper winding wires pulling out to achieve copper recycling.
