Solar Cell Manufacturing Plant in excellent condition
Equipment overview
Photovoltaic cell manufacturing equipment
Single crystal type, cell size 156.3 �? 156.3 (M
Manufacturing capacity 80 MW / year
Elapsed years after facility introduction January 2011 mass production operation
2. Equipment owned (attached with detailed list)
(1) Production facility
Cleaning device
Damage layer etching apparatus
Texture etching equipment
Phosphor glass etching equipment: 2 units (There are 2 lines on No. 6 line)
Oxide film removal equipment
Diffusion furnace, thermal oxidation furnace: 10 units (6 units for diffusion, 4 units for thermal oxidation)
Plasma CVD apparatus: Three (2 TB type, MCXS type, but no vacuum pump)
Printing drying furnace: 3 units (2 units for electrode printing, 1 unit for dopant printing)
Printing drying Firing furnace: 1 unit
Printing machine: 6 units (2 electrode printing: 2 units, 1 electrode printing: 2 units, dopant printing: 1 unit)
IV inspection machine: 3 units (1 unit for half cut, 1 unit for full size, 1 unit for remeasurement)
Wafer distributor (with inspection device.Wafer thickness, dimensions, etc.)
Various conveying devices (some control parts are taken, operation can not be guaranteed)
Laminator: 4 (NPC made 2 units, Nisshinbo made 2 units)
Plasma etching equipment (not subject to sale as it is sold to manufacturers)
(2) Inspection machine, measuring instrument
Sheet resistance measuring instrument: 2 units
Reflectance measuring device: 2 units
Ellipsometer: 2 units
(3) Other equipment / jig
Printing mask cleaning device: 1 unit
Tube washer (quartz parts wash): 1 unit
Jigs such as each carrier, quartz boat, stack jig
CVD exhaust gas burn-off device
13 Vacuum Flasks Suppliers
Short on time? Let Vacuum Flasks sellers contact you.
òNumerous Variants
A room for customization at a reasonable cost is the description that sums up the KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES. The MODEL 3660 SERIES has gained wide acceptance and solid reputation for its flexibility. It is in use throughout laboratories, universities and foundries, in both its original and customized variants.
ò Low-Cost
If the cost effectiveness is the decisive factor in choosing the right mass flow controller for you application, few can compete with the KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES. Its extensive menu of standardized optional features is yet another advantage in cost considerations.
ò KOFLOC Dependability
KOFLOC has 60 years of experience in manufacturing precision flow instruments. KOFLOC products, both standard and off-catalog custom items are well received throughout Japan as the name that manifests confidence. KOFLOC, the fluid expert, is the name professionals trust in precision control of minute flow.
ò Low Pressure Option
The KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES has a standard low-pressure differential option especially suited for applications of burn control.
ò Solenoid Valve
The KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES utilizes the unidirectional normally closed valve with solenoid actuator to achieve higher dependability and safety.
ò Standardized Dimensions and Parts
The KOFLOC Mass Flow Controller, MODEL 3660 SERIES retains the standard 3 in (76 mm) footprint, regular fittings and SEMI standard serial connector to easily replace and fit into existing gas lines without any modifications for use in widest possible applications.
òQuick Response
The KOFLOC Mass Flow Controller, MODEL 3660 SERIES is equipped with the new improved constant current thermal differential sensor for quick response of 0 ~ 100% in 2 s or less.
ò Versatility
The KOFLOC Mass Flow Controller, MODEL 3660 SERIES is in use as a component for Sputter deposition, bond wiring, welding and washing equipment for semiconductor and electronic industries. It is used in scientific and analytic purpose such as in thermal analysis and vacuum equipment. The MODEL 3660 is also capable of meeting unique needs as the mass flow controller in industrial applications, including gas mixing, air sampling, burn control and more.
òNumerous Variants
A room for customization at a reasonable cost is the description that sums up the KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES. The MODEL 3660 SERIES has gained wide acceptance and solid reputation for its flexibility. It is in use throughout laboratories, universities and foundries, in both its original and customized variants.
ò Low-Cost
If the cost effectiveness is the decisive factor in choosing the right mass flow controller for you application, few can compete with the KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES. Its extensive menu of standardized optional features is yet another advantage in cost considerations.
ò KOFLOC Dependability
KOFLOC has 60 years of experience in manufacturing precision flow instruments. KOFLOC products, both standard and off-catalog custom items are well received throughout Japan as the name that manifests confidence. KOFLOC, the fluid expert, is the name professionals trust in precision control of minute flow.
ò Low Pressure Option
The KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES has a standard low-pressure differential option especially suited for applications of burn control.
ò Solenoid Valve
The KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES utilizes the unidirectional normally closed valve with solenoid actuator to achieve higher dependability and safety.
ò Standardized Dimensions and Parts
The KOFLOC Mass Flow Controller, MODEL 3660 SERIES retains the standard 3 in (76 mm) footprint, regular fittings and SEMI standard serial connector to easily replace and fit into existing gas lines without any modifications for use in widest possible applications.
òQuick Response
The KOFLOC Mass Flow Controller, MODEL 3660 SERIES is equipped with the new improved constant current thermal differential sensor for quick response of 0 ~ 100% in 2 s or less.
ò Versatility
The KOFLOC Mass Flow Controller, MODEL 3660 SERIES is in use as a component for Sputter deposition, bond wiring, welding and washing equipment for semiconductor and electronic industries. It is used in scientific and analytic purpose such as in thermal analysis and vacuum equipment. The MODEL 3660 is also capable of meeting unique needs as the mass flow controller in industrial applications, including gas mixing, air sampling, burn control and more.
NEW 3D PORTION SLICER FOR FRESH MEAT!
Save operators and time with 6000pcs/h portion slicer.
High speed portion slice
Scans in 3D original meat block before slice, no feed back time and realize faster slice max 6000pcs portion slices per hour. Available individual portion slice, group slice and normal slice.
Hygienic displacement 3D scanning
Displacement 3D scanning sensor never touches products. The product maintains its shape and hygienic status.
Stable slice by special circular blade
Uses special circular blade designed for the LIBRA 165C. Developed unique decentering bladeâ??s motion is for sharp cutting edge. Blade is for use in three times by changing position.
Original Semi-automatic Grinding devise is standard for maintain stable cutting life.
Easy operation touch panel
Simple setting touch panel is equipped for easy operation.
Max.250pcs/min. high speed slice for normal slice
Thickness control slice mode is also available.
The size and length of meat can be cut as you wish.
Meat from Chilled to Frozen are sliceable.
Excellent operation ability by High-Speed processing.
Inter-Lock Structure by Sensor, secure and safety for operation.
Processing dimensions are various by exchange of the substitute frame. (Substitute Frame is selling separately)
70 slices/min. ultra-high-speed operation (with standard 8mm blade)
Featuring AC servo and special high precision 8mm stainless steel blade, POSEIDON provides uniform slices at ultra high speed of 370 slices per minute. Also, the inverter automatically adjusts slice thickness between 0.5mm and 30.0mm, each 0.1mm. The result is greatly enhanced performance.
Minimizes vibration even at ultra-high-speeds (patent pending)
POSEIDON incorporates unique built-in vibration measurement device. It is very quiet during operation and vibrations remain low even at the highest speed slicing.
Meat detection sensor (minimum detectable height: 20mm)
Meat detection sensor for immediate slicing. The sensor detects the edge of product and feeds just in front of the blade to save time for in-feeding.
Automatic air gripping system
Automatic air gripping system minimizes labor and increases efficiency.
Load product and closes the cover, then the unit grips the product automatically. After slicing, it releases the product and stores it in the meat holder.
Improved yield (minimum thickness of gripping part: 25mm)
Conventional chop cutters are wasteful because they always leave more than 30mm of uncut product. POSEIDON is improved meat holder that has reduced the issue as little as 25mm to ensure a dramatically improved yield.
Clamp unit (patent pending)
POSEIDON clamp unit holds the product firmly in position. It prevents slippage at the beginning of slicing and minimizes curling of slices. It helps to make sliced products uniform, consistent and appealing.
Three different thicknesses from a single block
In addition to slicing a block at fixed thickness, it is also available three different thicknesses setting for a single block of meat.
Color operation touch panel for easy operation
Color touch operation panel with microcomputer control included useful functions such as memorized data, periodic inspections, trouble shootings and electrical parts check mode. Operator friendly, safety and efficiently.
Continuous Feeding!
Powerful Slice at max. 300slices/min.
1. Circular blade provides uniform slice even high speed slicing.
2. Machine durability and yield improved.
3. Automatic thickness adjustment for face plate is standard.
4. Each parts around direct meat contact area are removable easily without using any tools.
