Protective face masks with nose clip FFP2, KN 95 CE Approved and Certified : EN 149:2001+A1:2009 Great for virus protection and personal health Environmental protection non-woven fabrics, Melt-blown fabric and other multi-layer fabrics effectively resist fine particulate matter (PM2.5) and bacteria in air pollution CE Approved and Certified : EN 149:2001+A1:2009 Packaged either individually or by 20 PCS/box Origin: China
Hydraulic top link with shock absorber mod. 3A 105 complete with Walterscheid quick release for tractors with powers between 200 and 300Hp The third point is READY TO USE, including fork, pin and pair of 880L 3/8 pipes and G3/8 fitting IT IS NOT JUST A THIRD POINT, BUT AN AGRICULTURAL TOOL IN ALL EFFECTS, A COMPLETE FLOATING SHOCK ABSORBER AT WORK The innovative Hydraulic Top Link with integrated gas accumulator is complete with a damping device and is interchangeable with the standard models that you already have, therefore without any installation difficulties. The product is already equipped with a high-quality original Waltersheid quick hitch or, on request, it is also available with a fork or eye attachment. The installation requires no special components and no additional spaces are required We remind you that this accessory brings the following ADVANTAGES: + Comfort: protects the operator from blows from jumping implements during transport + Efficiency: increases front axle grip + Intelligent: the implement follows the ground with the FLOATING movement which follows the ground with consequent reduction of consumption and better workings + Safety: improves the traction of the tractor while driving on the road by absorbing shocks + Productivity: Reduced travel times on the road and in the field - Maintenance: important reduction in maintenance costs of the tractor and of the operating machines  due to less wear on the components
Hydraulic top link with shock absorber mod. 3A 120 complete with Walterscheid quick release for tractors with powers between 300 and 400Hp IT IS NOT JUST A THIRD POINT, BUT AN AGRICULTURAL TOOL IN ALL EFFECTS, A COMPLETE FLOATING SHOCK ABSORBER AT WORK The third point is READY TO USE, including fork, pin and pair of 880L 3/8 pipes and G3/8 fitting The innovative Hydraulic Top Link with integrated gas accumulator is complete with a damping device and is interchangeable with the standard models that you already have, therefore without any installation difficulties. The product is already equipped with a high-quality original Waltersheid quick hitch or, on request, it is also available with a fork or eye attachment. The installation requires no special components and no additional spaces are required We remind you that this accessory brings the following ADVANTAGES: + Comfort: protects the operator from blows from jumping implements during transport + Efficiency: increases front axle grip + Intelligent: the implement follows the ground with the FLOATING movement which follows the ground with consequent reduction of consumption and better workings + Safety: improves the traction of the tractor while driving on the road by absorbing shocks + Productivity: Reduced travel times on the road and in the field - Maintenance: important reduction in maintenance costs of the tractor and of the operating machines� due to less wear on the components
disposable 3 ply face mask is made of 3-layers,inside and outside layers are PP non woven,middle layer is high standard N95/N98 filter paper. 1.Size:17.5x9.5cm, 2/3-PLY. With Ear-loop and tie on style. 2. Very low resistance to breathing,free from foreign smell,without any stimulating feeling. 3. Nose bar can be adaptable,comfortable,without glass fibres,latex free. 4. PFE(Filtration efficiency of non oily particles)â?¥30%. 5. BFE(Bacteria filtration efficiency)â?¥95%(99%). 6. Use ultrasonic welding technology, comfortable wearing. 7. white,blue,green,red,pink,yellow can be available. Specification: 1.Directly manufacturer, disposable face masks, any colors. 2.NELSON,ISO,CE, BFE>99%,type II /Type IIR standard. 3.Capacity: 1000,000pcs/day, 1*40HQ can be finished within 8-15 days; 4.Laxet free ,easy breath, eco friendly, OEM packing design, service in 24 hours. Packaging 1)50 pieces per box, 40 boxes & 2000 pieces per carton 2)1 piece per bag, 50 pieces per box, 40 boxes & 2000 pieces per carton Store in a dry, cool place (
30 gr. spunbond/25 gr. Meltblown/20 gr. Spunbond BFE 95% Elastico earloops, nose clip Custom and import taxes not included in the prices CIF seafreight or truck delivery
BRIEF DESCRIPTION - Single use protective mask 3 layers - With elastic bands and nose clip - non sterile MATERIALS - The mask is made with 3 layers: Inner layer (in contact with the face): Nonwoven Spunbond, Polypropylene 100% White, (Q-Tex PP nonwoven spunbonded - 25g/m2 white, provided by Q- Nonwovens BV) Middle layer: Nonwoven Meltblown, 100% polypropylene, 22 g/m2, 0.2 mm. Outer layer: Nonwoven Spunbond, Polypropylene 100% light blue, (Q-Tex PP nonwoven spunbonded - 28g/m2, supplied by Q-Nonwovens BV) The elastic bands are made of polyester and elastane (87% and 13% respectively) and are supplied by EFFE-ELLE srl. There is no latex component in the device DESCRIBE THE PACKAGING - Cardboard box of 50 pieces containing 5 PE bags of 10 pieces each.
DESCRIPTION Adult Disposable Face Mask Type IIR - EN ISO14683: 2019. Tie-on mask is equipped with 4 straps, nose clip. - INTENDED USE Reduction of the risk of spreading infections, particularly in epidemic or pandemic situations. Splash Resistant. Suitable for medical personnel. - MATERIALS The Mask is made up of 2 layers of TNT (external) and one internal layer of Meltblown (filtering capacity 99.9%) OTHER CHARACTERISTICS: â?¢ Microbial Cleaning according to ISO 11737-1 â?¤ 30 UFC/g â?¢ Differential pressure (Pa / cm2) < 60 â?¢ Biocompatible in accordance with ISO 10993-1 standards; ISO 10993-5; ISO 10993-10 COMPLIANCE Class I Medical Device in accordance with Directive 93/42/EC and 2007/47/EC. Compliant with EN 14683:2019, ISO 10993:2018
- DESCRIPTION Disposable Face Mask for Kids Type IIR - EN ISO14683: 2019 The mask is equipped with ear loops, nose clip. - INTENDED USE Reduction of the risk of spreading infections, particularly in epidemic or pandemic situations. Splash Resistant. - MATERIALS The Mask is made up of 2 layers of TNT (external) and one internal layer of Melt-blown (filtering capacity 99.9%) COMPLIANCE Class I Medical Device in accordance with Directive 93/42/EC and 2007/47/EC. Compliant with EN14683:2019, ISO 10993:2018 OTHER CHARACTERISTICS Microbial Cleaning according to ISO 11737-1 30 UFC / g. Differential pressure (Pa / cm2) < 60 Biocompatible in accordance with ISO 10993-1 standards; ISO 10993-5; ISO 10993-10
DESCRIPTION Adult Disposable Face Mask Type IIR - EN ISO14683: 2019. FULLY CERTIFIED IN EU The mask is equipped with ear loops, nose clip. Suitable for medical personnel. - MATERIALS The Mask is made up of 3 layers. 2 layers of TNT (external) and one internal layer of Melt-blown (filtering capacity 99.9%) Medical Device - Class I - Type IIR Disposable Face Mask with Elastic ear-loops or Tie-On Mask with 4 straps OTHER CHARACTERISTICS Microbial Cleaning according to ISO 11737-1 30 UFC / g Differential pressure (Pa / cm2) < 60 Biocompatible in accordance with ISO 10993-1 standards; ISO 10993-5; ISO 10993-10 LPMMA10EIIR
Staplers, staplers pins, paper clips.Export
Pressure Seal Globe Valve Manufacturer Europe is the largest Pressure Seal Globe Valve Manufacturer. The pressure seal valve applies sufficient force against the internal diameter of the valve body and the bonnet surfaces. When the pressure in the device rises, so does the stress on the pressure seal gasket. A pressure seal globe valve is a valve design concept that offers distinct advantages over a conventional blasted body to hat fixing device. It employs the valve framework strain to provide adequate strength against the inside width of the valve body and the cap surfaces. As the framework pressure rises, so does the force on the pressing factor seal gasket. Pressure Seal Globe valves are commonly used in pipelines to control the flow of viscous fluids like gasoline. It is capable of monitoring both flow rate and on/off operations. Their name comes from their spherical body shape, which is divided into two parts by an internal baffle. Description Body materials Carbon steel, A105, F304, F316, F304L, F316L, F51, F53, F11, F22. Class 150 2500. Size 1 2 48 Ends Socket weld, butt weld, flanged, threaded. Operation handwheel operated, gear operated, electric actuated, pneumatic actuated. Pressure seal globe valve is used in many industries like Petrochemical Industry Oil and Gas Industry Power Industry Chemical Industry Uses for a pressure seal valve include A pressure seal valve is used to handle high pressure in power generation. Two interchangeable spring loaded discs, a fully driven disc, and refining pins comprise the parallel slide gate assembly. Pressure Seal Globe Valves Have the Following Benefits Excellent ability to switch off and on. Excellent throttling skills. Shorter stroke length. Seats are simple to resurface. May be used as a check and stop valve. Pressure Seal Globe Valves are used in a variety of applications Water cooling systems. Devices that use fuel oil. Chemical or water based feed systems. Key steam vents and drains, as well as the boiler. Turbine lube oil device
Pressure Seal Globe Valve Manufacturer: Valvesonly Europe is the largest Pressure Seal Globe Valve Manufacturer. The pressure seal valve applies sufficient force against the internal diameter of the valve body and the bonnet surfaces. When the pressure in the device rises, so does the stress on the pressure seal gasket. A pressure seal globe valve is a valve design concept that offers distinct advantages over a conventional blasted body-to-hat fixing device. It employs the valve framework strain to provide adequate strength against the inside width of the valve body and the cap surfaces. As the framework pressure rises, so does the force on the pressing factor seal gasket. Pressure Seal Globe valves are commonly used in pipelines to control the flow of viscous fluids like gasoline. It is capable of monitoring both flow rate and on/off operations. Their name comes from their spherical body shape, which is divided into two parts by an internal baffle. Description: Body materials: Carbon steel, A105, F304, F316, F304L, F316L, F51, F53, F11, F22. Class: 150 - 2500. Size: 1/2''-48''. Ends: Socket weld, butt weld, flanged, threaded. Operation: handwheel operated, gear operated, electric actuated, pneumatic actuated. Pressure seal globe valve is used in many industries like: Petrochemical Industry Oil and Gas Industry Power Industry Chemical Industry Uses for a pressure seal valve include: A pressure seal valve is used to handle high pressure in power generation. Two interchangeable spring-loaded discs, a fully driven disc, and refining pins comprise the parallel slide gate assembly. Pressure Seal Globe Valves Have the Following Benefits: Excellent ability to switch off and on. Excellent throttling skills. Shorter stroke length. Seats are simple to resurface. May be used as a check-and-stop valve. Pressure Seal Globe Valves are used in a variety of applications: Water cooling systems. Devices that use fuel oil. Chemical or water-based feed systems. Key steam vents and drains, as well as the boiler. Turbine lube oil device
Premire is a classic method white sparkling wine, produced with 100% Pinot Noir grapes in Oltrep Pavese. It involves all senses with its brilliant colour, its golden reflections, and its fine and persistent perlage. The bouquet is ample, it opens with notes of flowers, white peach and citrus fruits, which are able to combine perfectly with hints of green pepper and acacia honey. Premire is bottle-aged for 36 months. On the nose you can perceive boulangerie fragrancies, on the palate is crispy, tasty, vertical and fresh. Premire is a well-balanced wine, elegant, harmonious, and it ends with notes of wild fruits. Premire is perfect for appetisers. It is ideal to accompany soups and purees,fish and vegetarian dishes.