Gears and special gears with straight and spiral toothing, duble spur gears with lateral hub pressure angle 20 in steel, iron, nylon, induction hardened.
high range 3"1/2 magnum waste with PP plastic body, close without overflow outlet, with inox bright flange, fixing screw length 43mm for universal application on all standard sinks (inox/synthetics/ceramic); basket strainer with metal pivot and metal handle perfect to collect garbage during the normal usage of the kitchen sink, helping to keep the pipes of the siphon clean. Conform to the worldwide recognized European rule EN274 as per thightness and flow rate.
PRICE FOR 1200 pcs FOB LA SPEZIA PORT ITALY
AVAILABLE FOR PERSONALIZED OFFER AGAINST HIGHER QUANTITIES REQUEST.
Used train rails in large quantities, in good condition,
all types of copper scrap in all forms.
used rails until 350,000/550,000ton/month, with a minimum order of 5000ton/month.
copper in all forms until 5,000/10,000ton/month increaseable, with a minimum order of 100 tons for the sample..
Electric Actuated Gate valve Manufacturer in Germany
Are you looking for the best Electric Actuated Gate Valve Manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer in Germany. An electric actuated gate valve is a type of gate valve that is powered by an electric motor to control the flow of fluid. The electric motor is connected to the valve stem, which controls the movement of the gate or wedge in the valve.
The electric actuator can be controlled by a control signal to open or close the valve as needed. The valve position can be monitored by a feedback device, such as a limit switch or positioner, which sends a signal to the control system indicating the valve's current position.
Valvesonly Europe is the leading Electric Actuated Gate Valve Manufacturer in Germany and are available in a variety of materials, including cast iron, stainless steel, and alloy steels, and can be used in a wide range of pressure and temperature applications.
Advantages of Electric Actuated Gate Valve:
It is suitable for both above ground and underground installation.
The closing feature of this valve is exceptionally good.
These valves can be used in a circuit both ways.
Pressure loss is minimum
Industries of electric actuated gate valve:
Petrochemical
Refineries
Process plants
Oil and gas
Description:
Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L,WCB, WCC, WC9, WC6
Size: DN15 to DN700
Pressure: PN10 to PN450,150 to 2500
End: Flanged, Socket weld, Butt weld.
Operation: Electric actuated.
Electric actuator details-
Torque 3 9 nm
Operating pressure- 8 Bar
Port Connection-NPT1.4
Mounting Base-ISO5211
Temperature--20 C - +80 C
Electric Actuated Gate valve Manufacturer in Germany
Are you looking for the best Electric Actuated Gate Valve Manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer in Germany. An electric actuated gate valve is a type of gate valve that is powered by an electric motor to control the flow of fluid. The electric motor is connected to the valve stem, which controls the movement of the gate or wedge in the valve.
The electric actuator can be controlled by a control signal to open or close the valve as needed. The valve position can be monitored by a feedback device, such as a limit switch or positioner, which sends a signal to the control system indicating the valve's current position.
Valvesonly Europe is the leading Electric Actuated Gate Valve Manufacturer in Germany and are available in a variety of materials, including cast iron, stainless steel, and alloy steels, and can be used in a wide range of pressure and temperature applications.
Advantages of Electric Actuated Gate Valve:
It is suitable for both above ground and underground installation.
The closing feature of this valve is exceptionally good.
These valves can be used in a circuit both ways.
Pressure loss is minimum
Industries of electric actuated gate valve:
Petrochemical
Refineries
Process plants
Oil and gas
Description:
Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L,WCB, WCC, WC9, WC6
Size: DN15 to DN700
Pressure: PN10 to PN450,150 to 2500
End: Flanged, Socket weld, Butt weld.
Operation: Electric actuated.
Electric actuator details-
Torque 3 9 nm
Operating pressure- 8 Bar
Port Connection-NPT1.4
Steam pressure reducing valve manufacturer in Germany
Do you want to know who makes the greatest Steam Pressure Reducing Valve Manufacturer in Germany? Germany's top producer of steam pressure lowering valves is Valvesonly Europe. A steam pressure reducing valve is a type of flow control valve that is designed to reduce the pressure of steam in a system to a desired level. Steam pressure reducing valves are typically installed in steam distribution systems, such as boilers and steam generators, to maintain a safe and efficient operating pressure for the system.
The valve works by controlling the flow of steam through the valve body. The valve body typically has a tapered or globe shape, which allows for precise control of the flow rate. Inside the valve body, there is a valve disc, which is connected to the valve stem. The valve disc moves up or down, depending on the pressure of the steam entering the valve.
When the steam pressure exceeds the desired set point, the valve disc closes, reducing the flow of steam and lowering the pressure. When the steam pressure drops below the set point, the valve disc opens, allowing more steam to flow through the valve and increasing the pressure.
Valvesonly is the dominant Steam Pressure Reducing Valve Manufacturer in Germany which are well known for their commitments to quality. All the products are tested by our highly professional team before delivery to clients.
A typical Steam Pressure Reducing Valve consists of:
ï?¬ â?¢Valve Body
ï?¬ â?¢Valve Disc
ï?¬ â?¢Valve Stem
ï?¬ â?¢Regulator (adjust the desired set point)
ï?¬ â?¢Pressure gauge (monitors the pressure)
Advantages of steam pressure reducing valve:
â?¢ It is ideal for large loads
â?¢ Less noise
â?¢ Waterproof.
â?¢ Suitable for high-pressure applications.
Industries of steam pressure reducing valve:
ï?¬ ï?¬Power generation
ï?¬ ï?¬Oil and Gas
ï?¬ ï?¬Marine and offshore
ï?¬ ï?¬Pulp and paper
ï?¬ ï?¬Textile
Description:
Body Materials: CF8, CF8M,Cast Iron, Wcb, Wcc, wc6,wc9, Ductile Iron, SS304, SS316,CF8M, SS316L, SS904L, Duplex Steel (F51,F53,5A,4A,6A), Super Duplex steel[55]
Class:150 to 2500, PN10-PN450
Size: 1/2 to 24
End Connection: Socket weld butt weld, flanged, threaded
Triple Offset Butterfly Valve manufacturer in
the topmost Triple Offset Butterfly Valve manufacturer in We provide high-quality and reliable valves at competitive prices. The triple offset butterfly valve is also known as a Triple eccentric butterfly valve. Because of its metal sealing, the thermal shocks and pressure peaks are getting reduced.
This design allows for low-torque operation. The composite stainless steel sealing on our triple offset butterfly valve ensures that there is no leakage. This makes the valve more resistant to high temperature, high pressure, and corrosion. Whenever the valve body is opened or closed, there is no friction happens between the disc and the valve body throughout the rotation.
What is a Butterfly Valve
A butterfly valve is a member of the family of quarter-turn, bi-directional, rotary motion valves used to stop, control, or start flow.
Quarter valves are the kind of valves that only require a quarter turn of the disc to fully open or fully close the flow. In order to transition from the completely open to the fully closed position, quarter turn valves simply need to be rotated 90 degrees. They are also known as fast-acting valves for this reason.
The shape and movement of the plug give the butterfly valve its name.
The plug has a rod running through it and is formed like a disc, giving it the appearance of wings. The disc rotates by a quarter when the rod is turned, falling perpendicular to the flow and stopping it. The disc is rotated back to its original position, which is away from the flow in order to restart the flow. To regulate the flow, the valve can also be opened gradually.
Description:
Class: 150 to 600
Material: Cast iron, Ductile iron, Stainless steel (SS304, SS316, F304, F316, CF8, CF8M, SS316L, SS409L), Carbon steel, Duplex steel.
End Connection: Wafer, Lug, Flanged
Size:
Pressure: PN6 to PN300
Operation: Gear Operated, Electric Actuated, Pneumatic Actuated
Valvesonly Europe is one of the best Jacketed plug valve manufacturer in Germany.The sleeve type of jacketed plug valve has simple structure, rapid opening and closing, small flow resistance, convenient maintenance, good sealed performance. Jacketed plug valves have a simple structure, are quick to open and close, have low flow resistance, are easy to maintain, and perform well when sealed. In the chemical, petroleum, and other industries, piping systems are controlled. Widely used in chemical, petroleum and other industrial piping system control. Valvesonly Europe manufacture amazing jacketed Plug Valve. It is often utilized in high-pressure temperature services.
Functions:
Widely used in chemical, petroleum and other industrial piping system control.
It can reduce the heat loss of medium in the pipe, and transfer the high viscosity medium which will solidify in room temperature.
Advantages:
â?¢ Reduced leakage point
Reduced effect of vibration
The product has the ability to keep you warm and cold at the same time. It can minimize medium heat loss in the pipe and pass high viscosity medium that solidifies at room temperature.
Jacketed plug valves can coherently handle gas, liquid fluid and extreme temperatures.
Jacketed plug valves can be serviced and repaired at the site of operation.
Industries that use Jacketed Plug Valve:
Chemical service industry.
Oil piping systems.
