Asuring via digital
Gearcase. Such microprocessor control is designed to optimize the
Charging cycles for any type of battery.
• 230v coil three-pole contactor.
• d.C. Fuse on rectifier output.
• delta-star stray flux three-phase power transformer class h;
Impregnated in autoclave with ecological epoxy resins, with
Thermocouples for disconnection due to maximum temperature.
• three-phase rectifier bridge with silicon diodes, natural cooling, with
Super vega is a stylish, compact and reliable aspirators for small surgery. Recommended for nasal aspiration, oral aspiration, tracheal aspiration of body liquids in adult as children. Vacuum continuously adjustable, vacuum indicator, unbreakable and autoclavable 1.000 ml or 2.000 ml bottle with safety float control valve. Gima offers a various range of suction aspirators: portable aspirators useful for small surgery in hospital ward with autoclavable 1.000 ml or 2.000 ml bottle with safety float control valve, suction power up to 30 air l/min; suction aspirators on trolley with 2x2 l jar and suction power of 40 l/min; high vacuum and high flow hospital suction aspirators with 2 or 4 litre jar (200/400 ml graduation) and antibacterial filter and flow from 60l/min to 100 l/min.
Gima offers a complete range of accessories: bottles, filters, silicone tubes, silicone vacuum suctions, stainless steel fraizer/rosen suction cannulas, suction catheters, bierer aspiration tubes, uterine aspiration cannulas.
r control is designed to
Optimize the charging cycles for any type of battery, 230v coil single-pole contactor,
D.C. Fuse on rectifier output, delta-star stray flux single-phase power transformer
Class h; impregnated in autoclave with ecological epoxy resins, with thermocouples
For disconnection due to maximum temperature, single-phase rectifier bridge with
Silicon diodes, natural cooling, with snubber protection, mains input and d.C. Output
Polarized cables, modular installation on galvanized steel base, sheet steel case with
Modular panels so as to assure maximum accessibility in case of service, epoxy
Powder coating, oven-baked, standard colour: ral 2002 red, new lexan plate with
Charging data very easy to understand, equalized recall push button, on - off push
Button, option to adjust the charging time from 90 to 210 minutes, option to adjust
The threshold voltage from 2.3 to 2.4 v/cell., equalization charge timed, led signaling
Charging phases or result, short check of functions and times, option to program
The equalized charge automatically, lab-tested electronic circuit conforming to the
Directive on electromagnetic compatibility and ce marking, automatic disconnection
Of battery charger due to battery disconnection, option: custom-made color, logo and
Silk-screen printing, option: assembly of plugs and battery connectors on request.
Our Diatermo 160, by selecting the modes of operation, provides cut pure cut, coagulated cut, forced coagulation, soft coagulation and û with forceps û bipolar coagulation. It is particularly suitable for very damp operational fields such gynaecological and orthopaedic surgery. The Leading-Edge Technology enables highly professional surgery intervention; Open Circuit (OC) Alarm warns the user that connection into the neutral plate has not been made or that the cable is disconnected or the neutral plate is not in contact with the patient; in this case HF emission for cut and coagulation operation is switched off. Gima offers a wide family of Diatermo and accessories. Models 106 and 108 are monopolar units (50/80 W) suitable for small operations are ideal for veterinary, dentistry, first aid and dermatology work.
All the other Gima mono-bipolar models (120/160/200/250/380/400 W) cover all the operational fields, from middle electrosurgery to surgery where high precision and reliability are essential, as endoscopy surgery.
The available accessories are monopolar forceps, scissors and cables, high quality insulated bipolar forceps and cables, autoclavable electrodes, single use sterile electrodes, single use, metal and rubber plates, monopolar handles (with or without switches), footswitches and board.
Icroprocessor control is
Designed to optimize the charging cycles for any type of battery, single mains input
Fuses, auxiliary transformer suitable for the supply voltage, d.C. Fuse on rectifier output,
Delta-star stray flux single-phase power transformer, tenvex copper windings with
Double enamel insulation; class h; impregnated in autoclave with ecological epoxy
Resins, with thermocouples for disconnection due to maximum temperature, singlephase
Rectifier bridge with silicon diodes, natural cooling, with snubber protection,
Mains input and d.C. Output polarized cables, modular installation on galvanized
Steel base (type a: 20/10, type b :30/10), sheet steel case with modular panels
So as to assure maximum accessibility in case of service (type a : 10/10 - 12/10,
Type b : 12/10 – 15/10), epoxy powder coating, oven-baked, standard color: ral
2002 red, lab-tested electronic circuit conforming to the directive on electromagnetic
Compatibility and ce marking, equalization charge timed, automatic start, automatic
Disconnection of battery charger due to battery disconnection, smart charging system
According to the discharge level of the battery, short check of functions and times,
Option: custom-made colour and custom-made logo and silk-screen printing, final
Acceptance test conforming to safety regulations, charging with decreasing current
(wa characteristic): 9÷11 h charging time, charging with decreasing current (wo -
Wa characteristic): 7÷8 h charging time, complete with mains and battery cables;
Assembly of plugs and battery connectors on request.
6 Autoclaves Suppliers
Short on time? Let Autoclaves sellers contact you.
The battery chargers of the cemb-easy 3000
Series are designed to recharge medium capacity
Traction and start lead-acid batteries and are
O the directive on electomagnetic
Compatibility and ce marking.
• option: custom-made colour
• custom-made logo and silk-screen printing
• complete with mains and battery cables; assembly of plugs and battery connectors
On request.
Technical characteristics easy 3000:
• 230v - 50hz one phase supply, (with possibility to request voltages different from
The standard ones), adjustable to ± 5% or ± 10%
• electronic control provided with final charge timer
• on-off switch
• rectifier bridge with silicon diodes, natural cooling, with snubber protection and
Gemov
• tropicalized stray-flux transformer : tenvex copper windings with double enamel
Insulation; class h; impregnated in autoclave with ecological epoxy resins.
• 12/10 sheet steel case provided with electrical bondings and ergonomic handle
• epoxy powder coating, oven-baked
• standard colour: ral2002 red
• new lexan plate with charging data very easy to understand
• lab-tested electronic circuit conforming to the directive on electomagnetic
Compatibility and ce marking.
• option: custom-made colour
• custom-made logo and silk-screen printing
• complete with mains and battery cables; assembly of plugs and battery connectors
On request.
• charge at decreasing current with intervention of the final charge
At 2.40 v/cell
• final charge with timed control 9h / 11h
• fixed charging time (equalization charge excluded)
• equalization charge (week-end charge) to be recalled. It will start after 55’ from
Charge end
• duration of equalized charging phase: each hour 5’ (repeated for 48 hours)
• calculation to determine the size of suitable battery charge: 16a for every 100
Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
