N/a N/a
1.Malleable iron pipe fitting 2.BV certification and ISO certification 3.BS standard,DIN standard and NPT standard. 1.1/8" to 6" 2.three brands:QIAO,QXM,CWD
Ductile iron pipe from DN80-DN1600. K7, K8, K9 T type, according to ISO2531/EN545. Bulk or 20/40gp.
As per specification ISO 2531/BSEN545/EN598. Can be supplied in loose/bundled conditions in containerized shipment/break bulk mode.
Our grey cast iron pipe fittings are in accordance with the standards: GB/T 12772, ISO 6594, ASTM A888/CISP 130, BS EN877, KSD 4307 etc. Through lost foam casting process, we produce cast iron soil pipe fittings such as elbows, tees, cross and so on. GB/T 12772, ISO 6594, ASTM A888/CISP 130,BS EN877, KSD 4307.
We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T113295, ISO2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons. The centrifugal ductile cast iron pipe is mainly used to transport water, oil and gas. The outstanding features of the nodular cast iron pipe are the following: 1: The centrifugal ductile iron pipe not only has the ductility, high strength and pressure-proof of steel but also has the corrosion resistance of grey cast iron. 2: The excellent mechanical property of the centrifugal nodular cast iron pipe (elongation>=10%, tensile strength>=420Mpa, pressure-proof >=4Mpa) accords with the requirements of high pressure-proof and resistance to deformation for the pipe used to transport water, gas and oil. 3: The ductile cast iron pipe has stable chemical properties. Plus anti-corrosion methods of zinc spraying and paint coasting, it has excellent anti-corrosion performance so that its service life is over 100 years. 4: The installation for centrifugal ductile iron pipe is convenient and quick and the construction cost is cheap. 5: High reliability. The centrifugal nodular cast iron pipe has high pressure-proof performance, good elongation as well as flexible joints. Medium leakage wont come up even the axial direction deviates 3 or 5 degree. It has better quakeproof performance and base anti-sinking ability. We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T 113295, ISO 2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons.
Suitable for all flanged piping materials above ground or in chamber. Flanges and drillings to ISO7005-2 (BS EN1092-2:1997, DIN2501) Use : For water , sewage and neutral liquids to max .70C The dismantling joint enables easy installation and dismantling of isolating valves , non return valves , flow metering equipment , pumps etc. It compensates for axial displacement of the pipe during installation/dismantling . Features: 1) Follower gland ring : Ductile Iron GGG500-7 2) Flanged Adaptor bodies : Ductil iron GGG500-7 3) F-piece pipe : Ductile iron GGG500-7 4) Bolts, Nuts and Washers Material : Carbon Steel Grade 4.8 with Zinc Coating , Epoxy Coating or Dacromet Coating Or Stainless Steel upon customer's request . 5) Tie Rods : Carbon Steel Grade 4.8 with Zinc Coating, Epoxy Coating or Dacromet Coating Or Stainless Steel upon customer's request . 6) Gaskets material : For water or Gas : NBR Grade A . For drinking water : EPDM rubber to BS2494:1990 type W . For drinking water and sewage : SBR Grade F . 7) Body Coating : Fusion Bonded Epoxy Coating inside and outside or bitumen 8) Sizes : DN50 - DN2000 9) Pressure Grade : PN10 / 16 / 25 10) Package : Bubble plastic bags, Cartons and Wooden cases. Suitable for all flanged piping materials above ground or in chamber. Flanges and drillings to ISO7005-2 ( BS EN1092-2:1997,DIN2501).
1) Standards : ISO2531, ISO4422, EN545, EN598, BS4772, AWWA C110 2) Material:GGG500-7 or Ductile iron 3) Specific types: "T" type ductile iron pipes fittings: double socket 11.25 22.5 45 90 bend DN80-2000 -all socket tee DN80-2000 -double socket tee with flanged branch DN80-2000 -flanged socket DN80-2000 Accessories of "T" type nodular cast iron pipe fittings: Gaskets according with EPDM. "K" type ductile cast iron pipe fittings: BOLTED GLAND BEND 90 11.25 45 22.5,CLASS K12 BOLTED GLAND CONCENTRIC TAPERS, CLASS K12 FLANGED AND BOLTED GLAND SOCKET PIECES, CLASS BOLTED GLAND COLLARS CLASS K12 BOLTED GLAND GHANGE COLLAR CLASS K12 BOLTED GLAND TEE, CLASS K14 BOLTED GLAND SOCKET SPIGOT BEND (90 45 22.5), CLASS 12 BOLTED GLAND SOCKET SPIGOT TEE WITH FLANGED BRANCH All above "K" type ductile iron pipe fittings specification: DN100-500 Accessories of "K" type ductile cast iron pipe fittings: Gaskets according with EPDM Bolts & Nuts in Carbon Steel grade 4.8. Standards : ISO 2531, ISO 4422, EN 545, EN 598, BS 4772, AWWA C110 Material : GGG500-7 or Ductile iron.
Material: HT150( gray cast iron) Making process: Centrifugal casting process Standard: GB/T12772, ISO 6594, ASTM A888/CISP 130, BS EN877, KSD 4307 and DIN 19522 Specification: Inside diameter from d 8mm to 250mm(1.5¡±--10¡±) with 3m length Function characteristics: The cast iron soil pipe or cast iron sewage pipe is produced by centrifugal casting process. The centrifugal cast iron soil pipe and cast iron pipe fittings are flexibly connected through stainless steel couplings with high quality rubber sealing gasket inside it. Standard: GB/T 12772, ISO 6594, ASTM A888/CISP 130, BS EN877, KSD 4307 and DIN 19522. Specification: inside diameter from d 8mm to 250mm(1.5¡±--10¡±) with 3m length.
1), Product Information The ductile iron pipe manufactured by vortex are mainly used for transferring the drinkable water,waste water and for irrigation. The diameter is from DN80-DN2000,K8/K9/K10/K12, Tyton socket and spigot,the standard length is 6m. 2),Standard conform to ISO2531/EN545/EN598/4179/8179 3), Material Ductile Iron GGG500-7&400-12 or ASTM-A-536grade 80-55-06 4) coating Metallic zinc spray with Bituminous Coating (Outside) Cement mortar lining (Inside). Epoxy coating available upon request. 5) joint method available Push-on 6), Process centrifugal casting 7), Inscription Style As per customers' requests Standard Inscription 8), Packing standard export bundle in bulk As per customers' requirements 9), Inspection Foundry in-house Third Party inspection available upon request . More information is available upon receipt of your enquiry.
EN545 Ductile iron pipe fittings With epoxy coating From DN40-DN600 Standard Eur patterns
K9/ C40 BS EN 545:2006 (Water application) BS EN 598:2007 (Sewerage application) Pipe Size Lth/bdl Qty per 40' Weight(Kg) Trailer(Max) K9 DN100 24 288 113 DN150 15 240 172 DN200 12 192 231 DN250 4 & 6 88 301 DN300 4 & 6 80 406 DN350 4 64 500 DN400 4 & 6 40 592 DN450 4 32 695 DN500 4 & 2 24 807 DN600 3 18 1047 DN700 3 16 1379 DN800 1 12 1687 Standard length 6m (Socket, Spigot)
Ductile Iron Pipe & DI Pipe Fittings If you are looking for steel pipe, ductile iron pipe, please contact us and establish business relationship with us. Goodmax have many years of experience and have the components you need for your project, Our products meet the standard like ISO, DIN, BS, JIS,ASTM. API, AWWA. Choose from the following our wide products range - Ductile Iron Pipes, DN100mm--1200mm - DI Fittings by Lost-Foam Technique, DN80--1200mm . 1. The above product standard: ISO2531, BS EN545, ISO4179, ISO8179, ISO4633 2. Productivity: 100,000 ton 3. Joint Type: T type, N type, etc. 4. Pressure: PN10/16 . We have over 10 partner factories or OEM manufacturers, and worked with them for many years, These close network help us to ensure your order will be delivered in very short time with good quality.
Material: Cast Iron Length: 10' Diameter: 1-1/2", 2", 3", 4", 5", 6", 8", 10", 12", 15"* Packing: Wood Pallet Packing Coating Of External: Pitch Paint Coating Of Internal: Pitch Paint, Epoxy Pitch Paint(Recommend) Advantage: Internal Epoxy Coating Will Improve The Corrosion Resistance. *Remark: B70 Pipe Outside Diameter Has Difference With A888 Pipes Why Choose Us: 1. 25+ Years' Experience In Cast Iron Soil Pipes And Fittings Production 2. 11 Automatic Production Lines, Automatic Cutting Lines, Automatic Painting Lines 3. Li Has QC Manager Approval And He Has Strict Requirements For Product Quality
Material: Cast Iron Length: 10' Diameter: 1-1/2", 2", 3", 4", 5", 6", 8", 10", 12", 15" Packing: Wood Pallet Packing Coating Of External: Pitch Paint Coating Of Internal: Pitch Paint, Epoxy Pitch Paint(Recommend) Advantage: Internal Epoxy Coating Will Improve The Corrosion Resistance. Our Advantage: Supply Full Set Roof Drainage And Floor Drainage Products In 1 Stop. Include Cast Iron Soil Pipe And Fittings, Flexible Coupling, Heavy-Duty Coupling, Roof Drain, Roof Outlet, Retrofit Roof Drain, Floor Drain, Area Drain, Floor Sink, Downspout Boots, Downspout Nozzle And Flange, Fasteners, Plumbing Hangers, Riser Clamps, Deck Screws, Stress Plates And Reciprocating Saw Blades.
1-1/2"-15"
Name:ductile iron fittings accessories ductile iron saddle pipe for DI pipe Standard:BSEN545 OR ISO2531 Material:Ductile iron Specificate:DN40-2600 Surface treatment:Bitumen outside and inside Payment:L/C OR TT Warranty:12months Customized support:OEM, ODM, OBM Place of Origin:QINGDAO,CHINA Brand Name:VTM Technics:Casting Body material:DUCTILE IRON MOQ:1 Pcs Application:Water Pipeline Packing:plywood case or pallet any questions, please contact me without hesitate
1. Standards:Double flange pipe produced according to ISO2531, EN545, BS4772, EN598, 2.Specification :Ductile iron flange fittings DN80-1200 3. Materials : Ductile iron 4. Pressure : PN10/PN16/PN25/PN40 5. Length according to customersâ?? requirement 6. Class K9 Or K12.
NAME:COUPLING FOR DUCTILE IRON PIPE Bolts&nuts:Electroplated galvanized zinc hot dip galvanized Sleevw:ductile iron Gland:Ductile iron Rubber Gasket:SBR,EPDM Or other Coating:Fusion Bonded Epoxy or wet paint
Description: Cast iron pump casing Centrifugal pump Material: Ductile iron ASTM A536 100-700-3 Weight: 346kgs Application: Pump & Valves/Municipal� Water Supply/Agricultural irrigation/Petroleum/Chemical/Mining Industry Keywords: Volute/Pump casing//Centrifugal pump/Sand casting/ Place of Origin: Hebei, China ZEN OEM Pump Volute Process: Resin Sand Casting +Machining+Painting Heat Treatment: Quenched and tempered Machining : CNC Vertical lathe+Boring Machine ZEN Ductile Iron Pump Volute Procedures: 1.� Incoming material inspection 2.Charge mixture 3.Moulding 4.Melting&Pouring 5.Shot blasting&grinding 6.Painting 7.Visual test 8.Machining 9.Process inspection 10.Cleaning 11.Leakage test 12.FQC 13.Packing&stocking 14.Pre-shipment inspection 15.Delivery Tolerance: +/-0.05mm or according to the customers drawing indicatedï¼? Inspection: MT/UT/RT/100% Visual+100%gauge/CMM Standard: ASTM. AISI. DIN. BS. JIS. NF. AS. Certification: ISO9001/TS16949/ISO14001 Supply Ability: 1000� Ton/Tons per Month Port: TIANJIN XIN'GANG Drawing: Provide by customer, or design according as the sample,in the format of Pro/E, Auto-CAD, SOLIDWORK, CAXA, UG, CAD, CAM, CAE, STP, IGES, etc.
