This is a best selling series and suitable for precision electronic product, ultra-thin product and ultra-high speed.
T series: from 60t~2000t. This series is suitable for all kind dimensions product in high speed molding, such as cap, cup, chair, bucket, large bucket products.
Injection moulding machine V Series: This series is suitable for mid/ high end general products. E Series: This is a best selling Series and suitable for precision electronic product, ultra-thin product and ultra-high speed injection molding. T Series: This series is suitable for all kind dimensions product in high speed molding, such as cap, cup, chair, bucket, large bucket products. R Series: This series is rotary table type two injection units and two cores pulls models, suitable for two-component clear-cut products and heterogeneous material products. D Series: This series is suitable for electronic product and is easy to measure, easy for setting. It can last longer life.
ES Series: A newly developed high-tech intelligence model, suitable for high end precision products. This design can accomplish energy-saving, high efficiency, high stable operation and quiet working environment V Series: This series is suitable for mid/ high end general products. E Series: This is a best selling Series and suitable for precision electronic product, ultra-thin product and ultra-high speed injection molding. T Series: This series is suitable for all kind dimensions product in high speed molding, such as cap, cup, chair, bucket, large bucket products. R Series: This series is rotary table type two injection units and two cores pulls models, suitable for two-component clear-cut products and heterogeneous material products. D Series: This series is suitable for electronic product and is easy to measure, easy for setting. It can last longer life.
Picture 1 tsskú¡production line 1íómain machineú¿including: the electrical machinery, the shaft coupling, the transmission system, the screw rod cylinder, the nose, hydraulic screen-change device, cooling, the lubrication system, the vacuum system, the electricity control system and so onú¬ 2íófeederú¦single-screw feeder 3íówater tank 4íóair-blast dryer 5íópelletizer 6íóvibrator Part one main machine A.Technical parameter 35 machine 1íóscrew diameter ú¿mmú¬ú¦35.6 2íóinternal diameter of barrelú¦36mm 3íóscrew speedú¿r/minú¬ú¦600 4íómotor power ú¿kwú¬:15 5íóscrew torsion ú¿n.Mú¬ú¦115 6íócenter distance ú¿mmú¬ú¦30 7íóscrew trough depth ú¿mmú¬: 6 8íól/dú¦ 9íóinstalled capacity ú¿kwú¬ú¦38.5 65 machine 1íóscrew diameterú¿mmú¬ú¦62.4 2íóinternal diameter of barrelú¿mmú¬ú¦63.0 3íóscrew speedú¿r/minú¬ú¦400 4íómotor powerú¿kwú¬:55 5íóscrew torsionú¿n.Mú¬ú¦ 6íócenter distanceú¿mmú¬ú¦52 7íóscrew trough depthú¿mmú¬: 10.4 8íól/dú¦ 9íóinstalled capacityú¿kwú¬ú¦100 75 machine 1íóscrew diameterú¿mmú¬ú¦71.2 2íóinternal diameter of barrelú¦71.8 3íóscrew speedú¿r/minú¬ú¦400 4íómotor powerú¿kwú¬:90 5íóscrew torsionú¿n.Mú¬ú¦ 6íócenter distanceú¿mmú¬ú¦60 7íóscrew trough depthú¿mmú¬: 11.2 8íól/dú¦ 9íóinstalled capacityú¿kwú¬ú¦150 B. External dimensions.ú¦ C. Weigh
Our plastic rigid flat net machine is dedicated equipment for producing hard plastic flat net with polyethylene (PE) as major raw material, and may manufacture multiple structure and specification products by converting orifice module and sizing device. The equipment is designed and manufactured by our plant upon combining advanced foreign technology with practical domestic situations, which has reasonable structure design, stable and credible performance, and easy operation and maintenance. Hard plastic flat net products from the equipment are widely applied for mattress interlayer, dike landslip-preventive net, subgrade strengthening, plant support net, building safety net, mine canopy guard net, pocket net, as well as packaging net for melon and fruit and vegetables, so it is also called universal net. Model Unit YZPW-2000 YZPW-2500 YZPW-3000 YZPW-4000 Applicable Material PE,PP PE,PP PE,PP PE,PP Pressing Machine 65/28 90/25 120/25 150/25 Product Width m 2 2.5 3 4 Power kw 68.4 86.4 180 225 Dimension (Length*Width*Height) m 9.6*2.9*3.4 12*3.1*3.5 16*3.8*4.2 18*5.2*4.8 Note:Special requipment is subject to the agreement of the parties.
Max film width(mm):900 1200 1700 2500 Max output(kg/g):60 80 100 120 Screw diameter(mm):45*2 55*2 60*2 80*2 Screw & barrel material:38crmoala Main motor power(kw):11 15 22 45 Film thickness(mm):0.05-0.12 0.05-0.15 0.02-0.18 0.05-0.18
Hdpe ldpe lldpe high-speed film blowing machine Max film width(mm):700 1000 2100 2200 Max output(kg/h):40 50 150 170 Screw diameter(mm):45 55 110 120 Screw & barrel material:38crmoala Main motor power(kw):11 18.5 55 75 Film thickness(mm):0.01-0.15 0.01-0.15 0.01-0.15 0.05-0.18
Max film width(mm):700 900 1200 Max output(kg/h):90 110 130 Screw diameter(mm):íT45 íT55 íT65 Screw & barrel material:38crmoala Main motor power(kw):11 15 22 Film thickness(mm):0.02-0.15
Sjsz conical twin-screw extruder Screw barrel:38crrm nitriding Hard tooth surface gear wheel box Vacuum venting device Forecd feeding system Electric macine; simenz Temperature controller: omron Frequency adjustment: helipu Power: 37kw Heater: cast aluminum stainless steel Size:4235*1520*2450 weight:4000kg
Sj65/30 single screw extruder Diamter of screw: 65mm L/d ratio: 30:1 Motor power: 37kw ac motor(simo brand) Heating power:24kw (cast aluminum heating device) Cooling motor: 0.25kw*6zones Screw and barrel: 38crmoala, nitriding treatment Temperature instruments: japan omron brand Ac contactors and switches: french schneider Transuducer: ivent brand Speed reducer: hard gears speed reducer Wooden case
Pvc sheets production line The whole production line includes the following major parts: Srl-z300/600 mixing unit, sjsz-80/156 extruder, Three rollers calender, cooling table, hauling off machine, winding machine Container
PE(RT)/PP/PP-R(C) Pipe Extrusion Line
SJ30/25 PE/PVC Corrugated Pipe Extrusion Line SJ45/25 PE/PVC Corrugated Pipe Extrusion Line(42 pairs of moulds) SJ65/25 PE/PVC Corrugated Pipe Extrusion Line(59 pairs of moulds) SJ90/25 PE/PVC Corrugated Pipe Extrusion Line(59 pairs of moulds) WOODEN BOX
Sjsz65/132 twin screw profile extrusion line Sjsz80/156 twin screw profile extrusion line Sj65 single screw profile extrusion line Sj90 single screw profile extrusion line Sjsz80/156 pvc elbowboard extrusion line(width 600mm) Sjsz80/156 pvc elbowboard extrusion line(width 800mm) Sjsz92/188 wood plastic door profile extrusion line Spinning carpet machine Wooden box
1300 plastic aluminum composite sheet extrusion line 1600 plastic aluminum composite sheet extrusion line Inside clapboard of refrigeratory extrusion line Sj120 pp hollow plate extrusion line Sj150 pp hollow plate extrusion line Sj65 pp/pe/abs/ ps plate extrusion line Sj90 pp/pe/abs/ ps plate extrusion line Sj120 pp/pe/abs /ps plate extrusion line Sjsz65/132 pvc plate extrusion line Sjsz80/156 pvc plate extrusion line Epe foam fabric production line Eps foam sheet extrusion line Xps heat reserving foam plate extrusion line Composite plate extrusion lineú¿three layersú¬ Pp composite plate extrusion line Pe physical foam net production line Wooden box
This machine is for the first process order in the production of cap. The sy-30b plastic bottle cap moulding machine can melt those studded plastic materials with high temperature and cut into the moulding hollows well-proportionedly, and then make into different types of caps. The caps made from this machine will not have any injected hole in the middle, so they looked quite smooth and nice. The machine is computer-controlled so that makes sure both the mold and the plastic materials to be moderate , and thus ensure the stability and endurance for the equipment. The characteristics include like easily operated, energy-saving and labor-cost saving. And the production capacity is triple than that of plastic-injected molding machines of the same power. This is a big step in the cap production industry. Main technical features Type: sy-30b Capacity: 10000-12000pcs/hr. Power for electric machine of the die cut machine: 2.2kw Power for electric machine of the extrusion machine: 4kw Power for heating ring of the extrusion machine: 7.2kw Power, voltage: 380v, 50hz;or 220v, 60hz Weight: 2800kgs Size: 2400x1300x1700mm 40' container
Operational principle of pom.Pp.Pmma.Ptfe stick extruder unit: single- screw extruder nose extrudes, mould finalizes the shape, cooling trough cools, the traction machine draws, the saw cutting machine or planetary cutting machine finally cut. They have the advantages of stable performance, convenient observation, little noise, good quality and low price. Application scope: they are appliable to produce hard pipes or plastic sticks products such as pvc stick, pom stick, ptfe stick, pom transparent pipe and pc (organic glass). This unit is also appliable to produce high-class transparent organic glass tubes.
The line is mainly used to produce flow pipe and drainpipe etc. The set is composed of extruder, die, cooling trough, tractor, the cutting machine, plank and electric control system etc. The line can also be used to produce large-caliber pe insulating tube. Its products mainly apply in the outer layer of the heating pipe, whose mesosphere is polyurethane foaming plastic and the inner layer is steel tube.
The foaming machine is mainly used in producing the EPE tubing, the process is like this: first melt the LDPE tree ester, then mix it with the butane gas, the talcum powder, anti-contraction medicinal preparation and other medicinal preparation, squeeze out the mixture through the extruding machine, after it becomes spongy in the die head part, finalize the design. The low density polyethylene foaming product includes foaming net, foaming stick, foaming tube and foaming diaphragm and so on. It is becoming the most popular packing material in the present market with the good function of body light, supple, soft, decompress quakeproof, willowy, anti-impact, heat insulation and preservation and so on,
