CM-8Y1 semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. The machine can be operated in the step-by-step mode and the semi-auto mode. The machine is small with low investment, easy and safe to operate. Main parameterú¦ TYPE ITEM UNIT PARAMETER Container Product material / PET PP PE Volume L 0.1-2 Theoretical output PCS/H 600-800 Preform length mm 15-350 Preform inner diameter mm ª+5-38 Moulding Max.mould plate Dimenstion(L x W) mm 350x380 Max.mould thickness mm 180 Clamping force KN 45 Mould opening stroke mm 16 Machine size and weight Main machine (L x W x H) cm 160x60x161 Main machine weight Kg 500 Heater (L x W x H) cm 187x63x145 Heater weight Kg 250 Power kw 17.5
íícm-9b semiautomatic bottle blow molding machine is suitable for producing pet plastic containers and bottles from 5000-10000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Adopting double crank to adjust mould , heavy locking mould, stable and fast , adopt infrared oven to heat the perform , the perform rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. The machine can be operated in the step-by-step mode and the semi- auto mode. The machine is small with low investment, easy and safe to operate by one person. Main parameterú¦ Type item unit parameter Container product material / pet pp pe Volume l 5-10 Theoretical output pcs/h 300-500 Preform length mm 15-460 Preform inner diameter mm ª)15-200 Moulding max.Mould plate dimenstion(l x w) mm 470x500 Max.Mould thickness mm 370 Clamping force kn 100 Mould opening stroke mm 350 Machine size and weight main machine (l x w x h) cm 193x72x183 Main machine weight kg 800 Heater (l x w x h) cm 187x63x145 Heater weight kg 250 Power kw 17.5 Wooden packing
Cm-12 blow molding machine is especially used to produce 3 gallon and 5 gallon bottles and is widely used to produce any shape of plastic from pet with neck finishes from 15mm-200mm. Perfect function with economic investment. Small size and compact construction with no space waste. Easy to operate and maintain , operation by one person . Saving power and uneasy to worn out , adopting new double crank four bars to lock mould, the cross fixed. Providing high pressure blowing system. We can provide performs and various bottle& cap molds for 5 gallon and 3gallon bottles to meet customer»s requirements. Main parameterú¦ Type item unit parameter Container product material / pet pp pe Volume l 10-25lú¿3-5 gallon Theoretical output pcs/h 90-180 Preform length mm 15-460 Preform inner diameter mm ª)15-200 Moulding max.Mould plate dimenstion(l x w) mm 420x500 Max.Mould thickness mm 40 Clamping force kn 330 Mould opening stroke mm 38 Machine size and weight main machine (l x w x h) cm 218x77x196 Main machine weight kg 1000 Heater (l x w x h) cm 237x68x165 Heater weight kg 380 Power kw 40
CM-A4 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Reasonable design, full automatic control, save power and labor. Adopt high quality components, Feeding system carries the performs by robot automatically. Infrared oven heater adopts the quartz lamp to heat the PET tube. Fully automatic process with low investment, high efficiency ,quick and safe operation ,easy for trouble -shooting , maintenance and other benefits. We have perfect service after sales . Main part Pneumatic part valve Smc cylinder Electric part PLC LG /Mitsubishi Operation system LG /HITECH relay OMRON ++¦+ Infrared thermometer ++¦·++¦¬America raytek Note All of the electrical components adopts CEíóULíóCCC aproved international advanced high-tech product
Main parameterú¦ TYPE ITEM UNIT PARAMETER Container Product material / PET PP PE Volume L 10-25Lú¿3-5 Gallon Theoretical output PCS/H 90-180 Preform length mm 15-460 Preform inner diameter mm ª+15-200 Moulding Max.mould plate Dimenstion(L x W) mm 420x500 Max.mould thickness mm 40 Clamping force KN 330 Mould opening stroke mm 38 Machine size and weight Main machine (L x W x H) cm 218x77x196 Main machine weight Kg 1000 Heater (L x W x H) cm 237x68x165 Heater weight Kg 380 Power kw 40
Rotary blowing method: professionally designed robot sends preform and takes bottle out automatically and accurately. Convenient operation system: Through touching screen operation, it can be changed frequently to adjust the parameter and have the widely operation. Automatic controlling: adopting precise and swift PLC controlling, it has the features of high precision and swift reaction. Blowing air system: specialized designing of three-work-place and multi-work-place combination valve makes blowing and pulling steady and precise and also keep the blowing effect in a pace all the time. Mould and replacement: specialized designing of enough tons of lock-mould system and swift load-load-mould structure.It has reliable installation and swift replacement . Heating device: The intelligence numerical control, feeds back the compensation system automatically,it can show enough the degree and quality of preform heating and keep the bottle mouth protection and cooling heating interchange horizontal line in accordance all the time. Namely ensure the product quality and reduce the production consumption thoroughly Low noisy sound :reducing-sound machine system, which is designed of circle close and single-path Features that can sight: the whole production procedures and machine's components can be observed through the transparent windows the operator can master the production and machine's running case at any time and it's good for maintenance of normal production and safety running machine.
CM-8Y heat-resistant bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. The machine can be operated in the step-by-step mode and the semi-auto mode. The machine is small with low investment , easy and safe to operate. This machine can producing PET bottle which can resist high temperature, such like 92 centigrade degree. This has solved the problem of the traditional juice and other liquid food packing. Main parameterú¦ TYPE ITEM UNIT PARAMETER Container Product material / PET PP PE Volume L 0.1-2 Theoretical output PCS/H 600-800 Preform length mm 15-350 Preform inner diameter mm ª+5-38 Moulding Max.mould plate Dimenstion(L x W) mm 350x380 Max.mould thickness mm 180 Clamping force KN 45 Mould opening stroke mm 16 Machine size and weight Main machine (L x W x H) cm 160x60x161 Main machine weight Kg 500 Heater (L x W x H) cm 187x63x145 Heater weight Kg 250 Power kw 24.8
CM-9B semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 5000-10000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. The machine can be operated in the step-by-step mode and the semi- auto mode. The machine is small with low investment, easy and safe to operate by one person. Main parameterú¦ TYPE ITEM UNIT PARAMETER Container Product material / PET PP PE Volume L 5-10 Theoretical output PCS/H 300-500 Preform length mm 15-460 Preform inner diameter mm ª+15-200 Moulding Max.mould plate Dimenstion(L x W) mm 470x500 Max.mould thickness mm 370 Clamping force KN 100 Mould opening stroke mm 350 Machine size and weight Main machine (L x W x H) cm 193x72x183 Main machine weight Kg 800 Heater (L x W x H) cm 187x63x145 Heater weight Kg 250 Power kw 17.5
Cm-8y semiautomatic bottle blow molding machine is suitable for producing pet plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle , mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Adopting double crank to adjust mould , heavy locking mould, stable and fast , adopt infrared oven to heat the perform , the perform rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. The machine can be operated in the step-by-step mode and the semi-auto mode. The machine is small with low investment, easy and safe to operate . Main parameterú¦ Type item unit parameter Container product material / pet pp pe Volume l 0.1-2 Theoretical output pcs/h 1200-1600 Preform length mm 15-350 Preform inner diameter mm ª)5-38 Moulding max.Mould plate dimenstion(l x w) mm 350x380 Max.Mould thickness mm 180 Clamping force kn 45 Mould opening stroke mm 16 Machine size and weight main machine (l x w x h) cm 160x60x161 Main machine weight kg 500 Heater (l x w x h) cm 187x63x145 Heater weight kg 250 Power kw 17.5 Wooden packing
Cm-a4 full automatic blow molding machine is suitable for producing pet/pe and pp plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Reasonable design, full automatic control, save power and labor. Adopt high quality components, Feeding system carries the performs by robot automatically. Infrared oven heater adopts the quartz lamp to heat the pet tube. Fully automatic process with low investment, high efficiency , quick and safe operation , easy for trouble -shooting , maintenance and other benefits. We have perfect service after sales . Main parameterú¦ Model cm-a4 cm-a4 Output depend on bottle design 3200-4000pcs/h +µµ+¦µ+± body diameter 20mm-100mm Height 50mm-350mm Neck diameter 15mm-38mm Mould cavity 4cavity Mould thick ness 240mm Mould 500x500mm Main machine power electrical source power 380v/220v 3phase 50/60hz Powe r 49kw Really use power 14kw Air source lp air compressor 1.6m3/min 1.0mpa 1set(7.5kw) Hp air compressor 1.0m3/min 3.0mpa 2set(each set 11kw) Air dryer 2.0m3/min 3.0mpa 1set Cooling water cooling water 15l/min Main machine size líßwíßh 1908íß1858íß1920mm Main machine weight 3600kg Auxiliary equipment Pre-form unscrambler is equipped líßwíßh 276íß106íß186mm Weight 250kg
Rotary blowing method: professionally designed robot sends preform and takes bottle out automatically and accurately. Convenient operation system: through touching screen operation, it can be changed frequently to adjust the parameter and have the widely operation. Automatic controlling: adopting precise and swift plc controlling, it has the features of high precision and swift reaction. Blowing air system: specialized designing of three-work-place and multi-work-place combination valve makes blowing and pulling steady and precise and also keep the blowing effect in a pace all the time. Mould and replacement: specialized designing of enough tons of lock-mould system and swift load-load-mould structure.It has reliable installation and swift replacement . Heating device: the intelligence numerical control, feeds back the compensation system automatically, it can show enough the degree and quality of preform heating and keep the bottle mouth protection and cooling heating interchange horizontal line in accordance all the time. Namely ensure the product quality and reduce the production consumption thoroughly Low noisy sound :reducing-sound machine system, which is designed of circle close and single-path
Shoe sole injection machine
Roll forming machine 4-16 station, 0.1-3.00 mm sheet thickness, piano panel contol, speed control, 60mt/min. Production capacity, etc... 2-8 tons
Baling machine with its trait 1. the machine is suitable for plastic industry, it will prcess the plastic film and plastic bottle ,press it and make solid shape ,it will be convenient to transportation 2. the machine is drived by hydraulic . 3. the machine with independent feeding mouth .it is easily to operate .the feeding mouth with safety protect service ,with high lock quality 4. the machine with automatic discharge system, the baling product will be come out automaticly Main parameter of baling machine
Baling machine with its trait 1.The machine is suitable for plastic industry, it will prcess the plastic film and plastic bottle ,press it and make solid shape ,it will be convenient to transportation 2.The machine is drived by hydraulic . 3.The machine with independent feeding mouth .it is easily to operate .the feeding mouth with safety protect service ,with high lock quality 4.The machine with automatic discharge system, the baling product will be come out automaticly
Single shaft plastic shredder character: 1. this machine is suitable to treat the big size of plastic product ,such as big diameter plastic pipe ,pressing plastic film and others 2. The blade base and blade on the rotary roller can be disassembly .it is easy to clean and maintenance. 3. The rotary blade adopt the V design, It can decrease the noise and decrease energy consumption. 4. Each rotary blade with 4 cutting knife edge, when the rotary blade is wear, it can be rotated to 90 degree, then the blade can continues use. 5. Each fixed blade with 2 cutting knife edge, when the fixed blade is wear, it can be rotated to 180 degree, then the blade can continues use. 6. The main axis is drive by gearbox, its running very stably, low noise and strong power. 7. the material push feeding system is hydraulic ways , ,its running very stably the machine is control by PLC system ,.the blade can rotated in opposite direction ,and also can close automatic if something unexpected happen , with very high safety service
From 160t~420t. This series is rotary table type two injection units and two cores pulls models, suitable for two-component clear-cut products and heterogeneous material products.
This series is suitable for electronic product and is easy to measure, easy for setting. It can last longer life.
1. Energy Saving: greatly reduce cost consumption, lower water and electric costs. 2. High efficiency: high efficiency power system design, quick response, even low speed has high efficiency performance. 3. High stable operation: closed-loop control system, it is very suitable for precision molding. 4. Quiet: low noise
Our machine is suitable for various middle-hollow bottles . 1360*1200*1200, 600
