The machine is one-step blow bottle equipment. It is used to make 5-500 ml plastic bottles. The machine output reached maximal 40, 000pcs bottles per day. Suitable for most thermoplastic resins such as pe, pp, ps and so on .Its products are widely used in medicine packing, the cosmetic packing of making up chemical industry, gifts & toys and so on.
Cavity number of one mould and volume of bottle. (for reference)
Volume*cavity quantity: 8ml*6 piece, 15ml*6 piece, 20ml*6 piece, 40ml*5 piece, 60ml*4 piece, 80ml*3 piece, 100ml*3 piece
Omachine weight: 4 t
Verall size l* w* h: 3400*1150*2300 mm
Packing: sea-worthy strong wooden cases
1.The mould use the ice water to cool and recycle, which can promote the efficiency of moulding
2.To make pc.Pet helmet lens needs strong experience, especially for the polishing of mould lens surface
3.The mould cavity of pc.Pet helmet lens mould is made of the imported s136 materials and treaded by chrome plating. To assure the polishing and wear resistance of products
4.The moulding runner should pour via sides of trapezoid shape to avoid cool materials, with 95kgs pressure , 245f¦ temperature and 20s for moulding time
5.The time for finishing mould is 60 days and the price is rmb 38, 000
1.Because of low cost, big capacity and cheap price, the pb-acid accumulator used widely, but if used in a wrong way, its life would be reduced too much . There are many factors which can affect the life of accumulator, but to charge the battery in a correct way can increase the life of accumulator. According to the research, the process of charging the battery has big influence on its life but the process of discharging the battery has little influence on its life, that is to say, the accumulator become bad is not because of normal usage but because of charging. Therefore , a good accumulator has played big role in the life for battery.
2.The accumulator contains 3 sets. The accumulator mould cavity is made of sweden 2738 materials to assure its polishing and wear resistance
3.The point gate of mould runner , with 100kgs pressure ·+210f¦ temperature and time of 55s.
1.The basic requirement of dust collector has strong suction, strong percolate ability and permanence.
2.The mould contains 10 sets, thereinto, industrial dust collector mould is made of the imported 718h materials and to assure of its polishing and wear resistancef·the dust collector suction should coordinate and be effective to reduce noise.
3.The product use recycled flowing water to assure high efficiency of mouldf·
4.Side pin gate of the mould runner with s shape to pour the ends to avoid cool materials, with 75 kgs pressure, 195f¦ temperature and time for 45s.
5.The time for finishing mould is 45 days and the price is rmb 220, 000
1 two sides glide plates of electric kettle mould were designed to pull thick stick , which is a high efficiency in the production
2·½the product use recycled flowing water to assure high efficiency of mould.
3·½to make electric kettle mould need a strong experience, especially the scale of withdraw in moulding.
4.The mould runner with vertical gate, within 95kgs pressure, 195f¦ temperature and time for 45 seconds.
5.The time for finishing mould is 30 days and the price is rmb 160, 000
Mould name: injection mould for grade traseira fd40-2
Brand: meiduo
Material:
Cavity 2344
Core: 718
Type of runner: cold runner
No.S of cavity: 1*1
Part material: pp shrinking ratio: 1.8%
We can design and manufacture moulds as requested.
We are trying to gain or inventing the products to be produced for the first time by our Research and Development Institute by means of the computer programmes called UNIGRAPHICS Cad-Cam. We also make moulds for plastic and aluminium injection.
Making moulds and aluminum injection, manufacturing the qualified productions in both products for the automotive and spare parts sector with aou rasing capacity from 0.1 kg to 4 kg in the pressed casting, from 0.3 kg to 100kg in the aluminium sand casting
We are trying to gain or inventing the products to be produced for the first time by our Research and Development Institute by means of the computer programmes called UNIGRAPHICS Cad-Cam. We also making moulds for plactic and aluminium innjection. k
Product range of ptfe rods, sheets and hollows:
Rods : extruded - diameter 3 to 200, length 1000 / 2000
Molded - diameter 20 to 775, length 300
Psheets : skived - thick 0.05 to 5, width 300 to 1800
Molded - thick 1 to 150, area 300 x 300 to 1500 x 1500
Hollows : skived - od 10 to 150, id 4 to 100, length 1000
Molded - od 25 to 1440, id 10 to 1420, length 300
Other made-to order sizes on request
We offer the following types of tubings in ptfe, fep and pfa materials :
Plain tubing
Colored tubing
Striped coloured tubing
Radiopqaue stripe tubing
Multilumen tubing
Tubing fabrications
Our tubings are used for the following applications :
Medical (usp class vi approved)
Instrumentation
Automotive push pull cables
Industrial and process hydraulics and other fluids
Electrical and electronic insulations (ul approved)
As per as product
5558 Injection Moulded Products Suppliers
Short on time? Let Injection Moulded Products sellers contact you.
