Clamping force: 1280kn Injection weight: 143~206g Space between tie bars: 410*370mm Machine dimension (l‡óh):4.34*1.29*1.86 Machine weight:3.3t
Machine controlled with servo driver, servo motor. Clamping force:8800kn Injection weight: 2603 ~ 3543g Space between tie bars: 1100*1100mm Machine dimension (l‡óh):13.6*2.65*3.4m Machine weight: 56.5t
Product materials: s50c / requested by customers Precision: standardized by ko kee technical standards manual Negotiable
Pet bottle recycling line The process is used to recycle big capacity and stable quality raw material, especially for psf manufacturer and recycled poy manufacturer with big capacity. The process flowchart as below: De-baling----- label scrapping------ label separation------- bottle pre-washing--------manual sorting and metal detecting-----wet grinding-------gravity separation-------chemical washing for pet flakes-------rinsing--------drying--------packing. Specification: Power : ~380 kw Capacity : 3 mt/hour input Area requirement: 1000m2. Flakes quality criteria: Size: 1 mm ~ 12 mm Humidity: 1.5 % Pe, pp: 20 ppm Paper, wood: 20 ppm Glues/hot melts: 20 ppm Organics: 20 ppm Inorganic particles: 20 ppm Ferrous and non-ferrous metals: 20 ppm Pvc: 30 ppm. Our pre-washing process can make pvc become distinguishable. But the efficiency of labors in bottle sorting unit is important. Colored pet flake: should be less than 20 ppm. But it should depend on efficiency of bottle sorting labors. Seaworthy packing
Plastic crusher 1 it can smash any plastic material rapidly and can be applied on several usages. Ití»s a smasher with full power. 2 the big plastic materials can be smashed directly without blocking which will result in the stopping of smash. So it can save a lot of time. 3 with water cooling system and the clearance between cutters provide facilities of heat dissipation in order to reduce damage effect between bearings and machine bodies and lessen the depreciation of steel characteristics. Specification: Power : 75kw Capacity :maximum 1600kgs/hour at 12mm hole in the screen Dimension: l1800 x w1500x h2400 mm. Seaworthy packing
Sheet moulding compound.
1.Nsk-250a is accurately controlled and operated by computer:smooth to operate and easy To maintain. 2.Independent hydraulic system;precise pressure, efficient operation, high productivity & top Quality. 3.A very capable clamping mould and high clamping mould pressure combine to produce a Product without any burr. 4.Steel close-mould seat, will never deform. 5.Stable rotating disc controlled by hydraulic transfer system, locate exactly, without noise. 6.The hydraulic pressure of clamping-mold has segmental speed control, efficient operation & high productivity will never damage the mold. 7.Screw rotation with hydraulic motor, feeds smoothly, speedy & noiseless. And the feeding Screw special design helps to increase production. 8.Hydraulic injection system : injects quantity accurately & efficiently, helps to increase Production. 9.The machine is very easy to operate & maintain-even by unskilled workers. 10.Auto feeding system controlled by computer : feeds the material precisely & easy to adjust. 11.Auto computer scout system for disc's rotation : locate accurately & without displacement. 12.The machine is suitable for p.V.C., t.P.R., p.V.C. Foaming t.P.U. And n.B.R. Material. 13.This machine has cooling system which can bring the good mould cooling results.
Item nsk-285 unit Screw rod diameter ø70 mm Ejective capacity 600 cm³/shot Screw revolution 0-100 r.P.M. Motor of spiral oil pressure 275 kg-m Motor of oil-pressure pump 6p x25hp kw/pole Mould clamping force 50 ton Mould clamping space(max.) 185 mm Size of mould available (max.) 180 x 400 mm Mould clamping frame 20 station Electric heating capacity(glue) 8 kw Acting oil capacity 550 l Machine size 3700 x 2500 x 1750 mm Machine weight 5.9 ton Gross weight 6.4 ton Packing dimension 4000 x 2040 2150 mm Negotiable
1.Nsk-250a is accurately controlled and operated by computer:smooth to operate and easy To maintain. 2.Independent hydraulic system;precise pressure, efficient operation, high productivity & top Quality. 3.A very capable clamping mould and high clamping mould pressure combine to produce a Product without any burr. 4.Steel close-mould seat, will never deform. 5.Stable rotating disc controlled by hydraulic transfer system, locate exactly, without noise. 6.The hydraulic pressure of clamping-mold has segmental speed control, efficient operation & high productivity will never damage the mold. 7.Screw rotation with hydraulic motor, feeds smoothly, speedy & noiseless. And the feeding Screw special design helps to increase production. 8.Hydraulic injection system : injects quantity accurately & efficiently, helps to increase Production. 9.The machine is very easy to operate & maintain-even by unskilled workers. 10.Auto feeding system controlled by computer : feeds the material precisely & easy to adjust. 11.Auto computer scout system for disc's rotation : locate accurately & without displacement. 12.The machine is suitable for p.V.C., t.P.R., p.V.C. Foaming t.P.U. And n.B.R. Material. 13.This machine has cooling system which can bring the good mould cooling results. Negotiable
1.Nsk-213(4stations or 6 stations) for single manual operation have high mobility and efficient Suited for few order, sample, testing mould. 2.The unique design of producing have good cooling system to use materials of foaming and no Foaming , when using foaming material let production not change color, not change quality expand The best foaming effect. 3.It is suitable for p.V.C. Foaming, t.P.R., solid p.U. & n.B.R. 4.Photoelectric digit control system with 3 patents divides quantity of materials into four steps to Control ejection quantity respectively and precisely. 5.The disc is computer operated to protect the system well especially to the moulds. 6.Movement of disc is hydraulic control with hydraulic brakes , enabling a stability in the movement And accuracy in positioning. 7.Special hydraulic design with speedy , low electric cost drive by 20hp motor. 8.Hydraulic closed mould system with powerful mould locking and would not create fiber trims and Peermeation of colors. 9.Efficient cooling system have good effect of cooling and stable quantity. 10.Cooperate with auto turn last system, auto clamping system easy to operation and high Capacity. Negotiable
The molds of the former vertical injection molding machine for rain boots was liable to wear down.The quality of rain boots was not good,and the machine was not easy to operate.Therefore,we imported the latest technique to develop the "Auto rotary injection molding machine for rain boots".The molds of NSK-375 can open and close automatically,which can save manpower and make it easy to operate the machine.With the "Wind pressure auto molding system",the operators can easily remove finished products from the molds without damaging the lasts so that the molds can last longer. The NSK-375 adopts direct-pressure injection which generates high pressure.It can produce boots of different sizes at the same time.The high clamping pressure ensures the quality of products.The machine can produce boots of different sizes or heights simultaneously,which reduces production time.Furthermore,the machine also can produce sandals by changing the molds. Product Character 1.The NSK-375 is the first machine with the photo-cell digital locating system in Taiwan. It is easy to accurately adjust the ejection quantity. 2.The machine is specially designed for producing rain boots. It is automatic, economical,efficient, and easy to operate. 3.The machine is run by a hydraulic system. The machine can adjust clamping pressure and can work at high speed. 4.The NSK-375 has eight(8)molds; freely select their usage; molds can be opened and closed manually or automatically. 5.Besides the 16"(45mm) rain boots, it can also produce pumps, slippers, and sandals. 6.With the "Wind pressure auto mold-opening device", the operators can remove the finished products from the molds without damaging the lasts. The molds can therefore last longer. 7.Two options for ejection quantity are available: a fixed quantity or full mold. 8.Powerful mold clamping prevents burrs. 9.Many different sizes of rain boots can be produced at the same time. Also sandals and rain boots can be produced simultaneously. 10.The machine is suitable for P.V.C.,T.P.R.,and N.B.R...etc. Negotiable
Fiberglass washbasin mould 1. Mould base: lkm, hasco, s50c, s55c/customized 2. Mould cavity &core: p20, 718, 2311, 2738 , s50c/customized 3. Mould life guarantee: more than 150, 000shots 4. Machine: high speed cnc milling machines Cnc milling machines Wire cutting machine CNC precise machine Fitting machine 3-D laser scanner 2000t, 500t hydraulic machine 5.Mould heat type: hot oil/ electric cartridge/ steam heating 6.Hydraulic cylinder we choose: parket, hps, merkle, smc, etc. 7.Packaging detail: inner packing: plastic bag outer packing:wooden case 8.Delivery on time. Inner packing: plastic bag outer packing:wooden case.
1. Short lead-time, high quality and low cost. 2. The mould was exported to germany. 3. We are capable of manufacturing various kinds of mould, such as moulds normal injection moulds, hardening mould, hot runner moulds, gas assistant mould, multi- layer mould, high precision mould for connector, overmold and double-shoot moulds etc. Involving in field of household appliances, automobile, madical treatment, daily-use commodity and toy etc. Fumigate-free wooden box
We are accomplished in HASCO standard , DME standard , MISUMI standard etc mold standard.
Sandwich panel forming line is specialized machine of new type building material, it main function is compounding color steel on thick, lighter core material eps panel or rock wool panel. Sandwich panel is one new type building material, ideal decorate material, lightweigt, high intensity, good appearance, convenience construct, short period of construction, and have heat preservation, waterproof and so on kinds of nature.Suitable for bulk storage plant, industral factory building, large-span roofing, frige, clean room, air conditioning equipment room and temporary shelters.Our sandwich panel forming line can produce six different panel. Max width: 1200mm Max thickness: 25cm Working speed: 0¡«3.8M/min Power: 34.1kw Weight: 15¡«16t.
Fabric folding machine Master fold:- Open width & double fold plaiting machine:- Suitable for all kinds of fabric Variable speed from 0-60mtrs/min. Counter meter for length measurement Selvedge guider for uniform plaiting. Tensionless handling of fabric through positive drive. Independent variable feed drive for tensionless feed also fitted with auto loop level positioning mechanism Maximum working width up to 300 cms Pile height 35 cms Adjustable fold length 75 – 110 cms Adjustable table lowering through special electro-mechanical controls depending upon the fabric thickness
two color injection mold for phone shell Material for plastic parts: PC & ABS
Plastic two color injection moulding Material: PC & ABS.
Two color injection molding of XBOX 360 handle. Material: PC & PMMA .
Vertical injection with vertical injection, suitable for insert molding. computerized LCD monitor NC control system, easy to maintain and operate the machine. Applied for general plastic/engineering plastic. Timber box and export standard.
