Carry handles for portability. Titanium Aluminium Alloy body for light weight, corrosion resistance and high strength for all models except GP-121, GP-123, GP-462 and GP-464. Professional choice for wide range of industrial applications. Large oil capacities to power a wide range of cylinders and tools. Two speed pumps provide fast pumping to meet the load of tools & cylinders. Internal pressure relief valve for overload protection.
Built-in safety valve ensuring operating safety against overloading. Air inlet pressure gauge provided to check consistency of air. The Air Cylinder and Piston are made from Titanium Aluminium Alloy. Air exhaust muffler for quiet operation. Air and oil inlet filters for reduced risk of damage from contamination. All air pumps are designed to be used with single acting cylinders.
Max Pressure : 2800 Bar TITAL alloy space material, Light weight, high strength, resistant corrosion and protected impact are suitable for a variety of bad environment. There are two velocities in action. An automatic change-over valve with precision, low and high pressure is built inside. During low pressure, a greater flow is provided to save the operating time so as to increase the working efficiency. Built-in safety valve provides safe dual-protection.
Description: Pressure test unit, also called pressure test pump which is recommended for high pressure testing of BOP stacks, choke and kill lines, Christmas trees and any other type of equipment requiring high pressure static testing. Test Units are available in unit-mounted, portable, skid-mounted and high flow electric driven styles. Accessories include stand-mounted chart recorders and high pressure hose assemblies. High Pressure Test Units are provided in working pressure ranges from 5,000 to 20,000 PSI. Accessories of pressure test unit, including stand-mounted chart recorders and high pressure BOP Accumulator Units, meet the design specification specified in API 16D. Customized pressure test pump is available to assure reliable control of the BOP stack with adequate reserve for continuous operation under emergency conditions.
Description: Pumping pump is a common downhole device driven by a pumping unit to pump crude oil from the well to the ground. General pumping pump is mainly composed of four parts: barrel, suction valve, plunger, and exclusion valve. According to the fixed way of sucker rod pump in the underground, it can be divided into rod pump and tubing pump.
Description: Centrifuge is the premium centrifuge with the best material configuration. It is the best option for middle term and long term investment because of its reliability and working life. This series of decanter centrifuge are popular for the drilling waste management, oil sludge treatment, tank cleaning waste treatment, as well as solids control, barite recovery, Low gravity and high gravity solids separation, dewatering etc.
Description: Sand pump is widely used in solids control system. Internal the mud system, It can be located before the de-sander, de-silter and mud cleaner to transfer the drilling mud to the cyclone unit, equipped to the jut mud mixer unit as the mud mixing pump. For external of the mud system, the Sand pump can be used as the trip pump for mud supplement under well and the supercharging pump to transfer the drilling fluids to high pressure rig mud pump. The solids contained in drilling fluids request the Sand pump wet contacting parts with excellent wear resistance and high efficiency on flow rate. Based on the material adopted and structure design.
Pump valve Terms of delivery: FOB shanghai/Ningbo Payment condition: TT Delivery Period: 30days Packing: Export packing/As per customer's request Pump valve parts production:Changzhou Kadi International Trade Co.,ltd Product Details Model No: Customized Material: Carbon steel/alloy steel/stainless steel Type : Chemical Hardening Sand Casting Method : Thermal Gravity Casting Sand Core Type : Resin Sand Core Application : Oil and Gas Machining : CNC machining
Description: Lake Petro provide the mud pump accord with API specifications, as per international standard and requirements. Our product offering is extensive used in drilling and fracturing for oil and water well, including: F series, P series, NB series, BW series and TWS series.
Description: The electric submersible progressive cavity pump (ESPCP) is a new innovation for artificial lift production recent years. It is a combination of Progressive Cavity Pump (PCP) and Electric Submersible Pump (ESP) motor as a down hole fluid lifting system to handle the most difficult artificial lift. It has wide fluid range, more suitable for deviated well, horizontal well, especially with viscous crude oil, high sand cut and gas oil. The wear of tubing and sucker rod could be eliminated and energy cost is reduced efficiently.
Model: WFLSQWRF Cooling capacity: 65kw/130kw Heating capacity: 68kw/136kw Ambient Temperature: -22°C~48°C Refrigerant: R22 Power Input: 380V/50Hz Module type: up to 16 units can work together Type: Air source water chiller and heat pump It is good choice for villa, school, supermarket and office building. More inforamtion pls check our web: www.haohvac.cn
Model: WAR Cooling capacity: 7.1kw ~29.5kw Heating capacity: 8.5kw~35kw Ambient Temperature: -20°C~46°C Refrigerant: R22 Power Input: 220V/50Hz and 380V/50Hz It is a good choice for home heating and cooling. We are on service 7*24H contact: selina Liu Email: selinaliu1@outlook.com Skype:selina.liu27 Tell:+86 15275349088
We can supply mud pump spare parts like mud pump liner including zirconia ceramic liner and high chrome bimetallic liner, Mono-metal Liner, fluid end module, valve and seats, piston, piston rod, pony rod etc. parts for mud pump, we can also customize and machine as your drawing. Chrome plates the same outer hull in lieu of sleeve to a maximum thickness. It is then machined and polished to a mirror finish. 1.Lake offers chrome-plated liners made from premium forged steel with the core plated by chrome. 2.The chrome-plated liners have hardening characteristics of 58 to 62 Rockwell C hardness. Lake Petro has very rich experience in supplying spare parts of mud pump to the worldwide Oil Drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts. Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump. These parts include liners, pistons, valves & seats,piston rods, rod clamps, extension rods, all fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings. GARDNER DENVER:PZ-7, PZ-8, PZ-9, PZ-10, PZ-11 IDECO:T-500, T-800, T-1000, T-1300, T-1600 NATIONAL:7-P-50, 8-P-80, 9-P-100, 10-P-130, 12-P-160, 14-P-200, 14-P-220, K-700, K-700A, K-500, K-500A OILWELL:A-350PT, A-560PT, A-600PT, A-850PT, A-1100P, A-1400PT, A-1700PT EMSCO:F-500, F-800, F-1000, F1300, F1600, FB-1300, FB-1600, D-375, D-700, D225 LANSHI:3NB-1300C, 3NB-1000, 3NB-1000C, 3NB-800 QINGZHOU:SL3NB-1300A, QZ1000, QZ-500, QZ-350, QZ800, SL3NB-1600 RUSSIAN:8T-650, UNBT-600, UNBT-950, UNBT-1180L, UNBT-950A, UBT-400, BT-600, UB-590, UNB-600, 8T310, 8T650-01
High Pressure Pump A&S Pump Co.,Ltd, as a global supplier of pumps, supplies all kinds of high pressure pumps as follows: Honda high pressure pump HAMMELMANN High Pressure Pump Danfoss High Pressure Pump Graco High Pressure Pump Haskel High Pressure Pump YUKEN High Pressure Pump Ingersoll Rand High Pressure Pump VICKERS High Pressure Pump Kawasaki High Pressure Pump Grundfos High Pressure Pump YEOSHE High Pressure Pump HAWK High Pressure Pump IPM High Pressure Pump SUMITOMO High Pressure Pump KSB High Pressure Pump Nikkiso Hih Pressure Pump CAT High Pressure Pump Parker High Pressure Pump Rexroth High Pressure Pump Besides, we also supply these pump brands: IWAKI pump, ILMVAC pump, A-Ryung pump, Verderair pump, KUOBAO pump, KSB Pump,Grundfos pump, Goulds pump, ITT Pump, Ebara Pump, MiKaWa pump, Pan World pump, SANSO pump, Wilo pump, Shurflo pump, HYPRO pump, Thomas pump,OBL pump, Jabsco pump, Ingersoll Rand pump, BINKS pump, Graco pump, Minamoto pump, Versa-Matic pump, KNF pump, Blagdon pump, GAST pump, DEPA pump, ProMinent pump, Hydra-Cell pump,Yamada pump, Cheonsei pump, Seko pump, Blue-White pump, Nitto Kohki pump, Wilden pump, Wagner pump, Milton Roy pump, Sandpiper pump,etc
1 Hp Monoblock Pumps Havells, Bentex, Khaitan, Crompton Greaves, Unnati Ets
Unnati Centrifugal Pumps
0.5 Hp Single Phase Monoblock Pumps - Khaitan, Bentex, Havells, Crompton , Unnati
ALL TYPE OF SUMMERSIBLE PUMPS AVAILABLE
A brand new, self priming, lift-action hand pump suitable for a wide variety of liquids and applications, both industrial and domestic. For use with 20 & 25 litre steel or plastic jerry cans and drums. Lightweight, versatile, easy to clean and to transfer from one container to another. Manufactured from polypropylene, polyethylene and ABS (acrylonitrile butadiene styrene). The lift action of the pump means that the fluid is dispensed on the up-strike thus allowing complete control of the rate of flow of the liquid. The adjustable press fit conical shaped collar fits all types of containers such as cans, jerry cans, drums and barrels steel, plastic or fibre. Domestically, great for camping and emergency water supply, pool chemicals, boat bilge emptying, draining sinks, basins & tubs, emptying blocked washing machines, endless garden uses, draining aquaria/ponds, and many other general applications. Industrially, an extremely versatile pump. Allows containers to be emptied without pouring and keeps the fluid contained during dispensing. Sealless constructions means no parts will wear or need to be replaced. Specifications Sealless construction Wetted parts: polypropylene ~ polyethylene ~ ABS Suitable for 5, 10, 20, 25, 30, 50 & 60 litre drums Supplied complete with rigid outlet spout & 13 mm i.d. hose (non-toxic) 660 mm long Press-fit cap adaptor fits apertures 35 mm to 55 mm Riser tube length mm: 720 Riser tube dia. mm: 23 Overall length mm: 860 Flowrate: 240 ml per stroke / 10 litres per minute Weight: 150 g Industrial applications: Non-corrosive chemicals â?¢ Cleaning agents â?¢ Non-corrosive solvents â?¢ Degreasers â?¢ Janitorial chemicals â?¢ Water based liquids â?¢ Anti-freeze â?¢ ATF, traffic film remover Liquid foodstuff applications: Drinking water â?¢ Cooking oils â?¢ Juices â?¢ Wine â?¢ Milk â?¢ Vinegar â?¢ Liquid additives â?¢ All other consumable liquids Domestic applications: Water â?¢ Petrol â?¢ Diesel â?¢ Kerosene â?¢ Chlorine â?¢ Water based fluids â?¢ Detergents
Manual pond silt remover and stirup mud pump for water filtration. Pond emptying pump and evacuation of standing water. Ideal for small and medium garden water ponds for cleaning the mud, dirt and leaves from the surface and ponds bottom. Recommended for small domestic pools as hand operated water filtration and cleaning tool. Constructed of high-density plastic (polyethylene pump head, PVC suction tube). High quality durable Nylon Filterbag 27cm depth X 12cm width. 38mm o.d. dia. outlet. 130cm overall length. Weight: 700g Light weight, versatile, easily cleaned.
