Find Verified Industrial Goods Supplies Suppliers, Manufacturers and Wholesalers

Andritz S Pump and Spares S100-350 pump front lining is made of 1.4460 material, and S100-350 pump fields of application including mechanical pulp production, secondary fibres, board machine, biological waste water treatment, sugar industry, flue gas desulphurization, bio-ethanol treatment, chemical pulp etc. Alternative Andritz S series single-stage process centrifugal pumps are available with closed, semi-open or open impellers. These wear-resistant pumps are suitable for working with a wide range of media. Depending on the type of impeller, they can transport contaminated liquids with amount of solids up to 8%. They are used as process pumps in paper, chemical, sugar, energy, food industries, water, sewage treatment, drainage or other systems.

FP Series Double Suction Fan Pump is a low pulse and high efficient paper pulp pump,It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed for flow rates up to 20,000 m/h and heads up to 220 m. The pumps can convey stock suspensions with consistencies of up to 2%. The fan pump supplied has a very high efficiency of 92% and lowest pulsation in order to guarantee perfect sheet formation. FP Paper Pulp Pump is one kind of centrifugal single stage single suction paper pulp stock pump .it is widely used in such as paper making industry, pulp and paper, steel, chemical, food, sugar, or bioethanol industries .It can transport less than 6% concentration paper pulp, sewage water,chemicals or fine slurries etc.,and it can also transport the non-abrasion medium in other industries. Design Features: Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration. Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation. Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc Shaft seal - Mechanical seals and packing seal can be used as per requested Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)

Description 20622A Gland Assembly for Mission 4x3x13 Mud Pumps. offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.

Frame Plate Liner Insert SP15041A05 is the main part of 150SV-SP Vertical Slurry Pump wet side. It works with the volute lining. The frame plate liner inserts and impellers are used to transport mud. And the frame plate has a replaceable wear-resistant metal lining plate or rubber lining plate. are a professional slurry pump parts manufacturer, Slurry Pump spare parts are a maintenance requirement when operating slurry pumps, and can t be ignored. offer suitable replace spare parts for original slurry pump, including heavy duty slurry pumps AH (R), M (R), high head slurry pump HH, light duty slurry pump L (R), gravel pumps, vertical sump slurry pump, and froth pump. Tobee have different materials, such as high chrome pump parts, dual-phase steel slurry pump parts, slurry rubber pump spares, polyurethane pump spare parts, slurry pump ceramic sapres, etc.

Vertical slurry pump named vertical spindle pump, Vertical sump pump, vertical cantilever pump. vertical submerged pump. Vertical sewage pump, Column pump as well. Impeller SP10206 - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary. Casing SP10092 - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR. Back Liner SP10041 - It forms a pump chamber with throat bush and volute liner where the slurry would flow through them, Tobee offers back liners are interchangeable with stardard pump back liners with high chrome, natural rubber, polyurethane for different working condition. Vertical Sump Pump Parts: Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones. The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing. Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered. Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected. Submerged Bearings - None Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye. Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.

Hexagonal wire mesh machine, gabion machine, chain link fence machine, barbed wire machine, concertina razor wire machine, field fence machine, steel fiber machine, crimped wire mesh machine, wire straightening and cutting machine, nail making machine, wire drawing machine.Installation service

1.5 1B-TH Slurry Pump is end-suction, split-case, centrifugal slurry pumps have set the world standard for heavy duty abrasive pumping applications. With large shaft diameters, heavy duty bearing assemblies and robust slurry pumping capacity, Application customization comes standard with this line by applying a wide variety of metallic and elastomeric parts options, an assortment of seal arrangements, and a standard impeller adjustment mechanism incorporated into every base assembly. Slurry Pump Design Features Slurry Pump wet parts are made of wear-resistant high chromium alloy. Slurry Pump bearing assembly use cylindrical structure, adjusting the space between impeller and front liner easily. They can be removed completely when being repaired. Bearing assembly use grease lubrication. International famous bearing The shaft seal could use the packing seal, expeller seal and mechanical seal for all slurry pump. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications at its working site. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.

There are universal joint for industrial ,automotive and agricultural application, For the industrial u-joints,we usually make by the material 20CrMnTi,also some clients want us to make as 20CrN4A to make it more strong with a higher hardness. also clients called outside circlip u-joints for industrial application from abroad, it is different from another type industrial u-joint called , which is inside circlip industrial universal joint,also called split yoke type u-joint,please visit the page below to check the type u-joints and to see which type of u-joints that you need. Nowadays we are developing for better and better design of the universal joint,the oil seal and needle bearing we have revised many times,the working life is longer and longer now, Below is a SWC225 u-joint,you can see more details also we can make the dimensions as clients need. And you can also check our facebook page to have a check more photos. U-JOINT MODEL Diameter(mm) Length(mm) Application Reference SWC150 55 128 SWC180 75 152.5 SWC225 90 191/192 SWC250 95 217 SWC285 110 247 SWC315 120 275 SWC350 135 307 SWC390 160 334 SWC440 180 377 SWC490 200 421 SWC550 225 471 SWC620 245 532 SWC680 285 595 SWC720 300 642 SWC780 310 681 SWC800 320 663 SWC850 362 713 SWC900 375 774 SWC950 404 825 SWC1000 420 843 SWC1060 440 892 SWC1200 480 977 SWC1280 500 1070 SWC1320 525 1108 SWB52*133 52 133 Najico 52*147.2 52 147.2 GWB 57*150 57 150 Najico 57*152 57 152 GWB 65*157 65 157 Kempf 65*172 65 172 Kempf,GWB 587.48 65*220 65 220 Najico 72*185 72 185 GWB 74*171 74 171 Kempf 74*180 74 180 Kempf 74*195 74 195 Kempf 74*217 74 217 GWB 587.50 74*244 74 244 najico 83*195 83 195 Kempf 83*220 83 220 Kempf,Maina Maina 25 83*231.4 83 231.4 Kempf,GWB 83*280 83 280 Najico 95*219 95 219 Kempf 95*250 95 250 Kempf,Maina Maina 28 95*308 95 308 Najico 110*275 110 275 Kempf,Maina Maina 31 110*340 110 340 Najico 130*301.6 130 301.6 / 300 Kempf,Maina Maina 35 75*152.5 75 152.5 75*173 75 173 80*192 80 192 80*215 80 215 82*171 82 171 90*192 90 192 95*217 95 217 110*247 110 247 SWL160 65 136 SWL180 72 153 SWL220 82 171 SWL250 100 213 / 214 SWL285 115 243 SWL315 130 267 / 269 SWL350 145 299 145*336 145 336 Maina Maina 39 SWL390 165 332 / 333 SWL440 185 374/ 377 188*420 188 420 Maina SWL490 210 417 / 419 SWL550 240 469 / 472 SWL620 270 531

Quick coupling accessories are mainly for quick coupling products and help to make easy and fast connection between the machineries & equipment. Our company, which exports quick couplings to nearly thirty different countries with the brand of Tekno-met, works in harmony with all the brands used in the world and works smoothly. Tekno-met continues to grow and develop with the mission of modern technology in production, common sense in solution, customer satisfaction in sales, as on the first day.