Lakes mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc. The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields. Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the liners flexural strength() is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
Specification: We are producing vavious custom Zirconia Ceramic Liner ceramic sleeve for pump which is high temperature resistant tubes . Zirconia Ceramic liner Ceramic Sleeve for pump have exceptional hardness and strength, resistance to chemical attack and wear, low dielectric loss and excellent electrical insulation properties. Additionally, Alumina can be metallized for brazing to other metals, highly polished, and comes in a variety of purities depending on it use. Due to these outstanding properties ceramic Alumina tubes are used in a wide range of industrial and advanced applications. Zirconia Ceramic Liner Ceramic Sleeve for pump exhibits high hardness, good abrasion resistance, high strength, and stability. These products are developed incorporating sophisticated technology and are made available to patrons at market leading prices. Zirconia Ceramic Liner ceramic sleeve for pump is a unique advanced ceramic. Products manufactured from alumina ceramic exhibit superior mechanical properties such as high strength and flexibility. Heat insulating properties and oxygen-ion conductivity indicate zirconia has potential for use in a wide variety of applications - everything from telecommunications to the new energy of the future and environmentally beneficial products. Depending on doping material different material properties could be achieved because of influencing the Yttria's microstructure. The "Ceramic Steel" titled Zirconia is doped with Yttria forming an ultra-fine ductile structure with sub-micron grain formation leading to enormous bending strengths. Magnesia doped qualities are less strong also showing a coarser microstructure. Advantages: 1. Excellent insulation, security, long working life. 2. High temperature resistance. 3. Resistance to electric breakdown. 4. Stand wear and tear. 5. High strength. 6. Corrosion resistance. 7. Good compactness. 8. HIgh hardness.
4089153-QSX15 ISX15 X15 cylinder liner 4089153 4309389 4025311 4101507 WUHAN HUACUMDA MACHINERY CO.,LTD Huacumda,Specialized in supplying Cummins,Komatsu,Hyundai,Yanmar Diesel Engine Assy and Engine Spare Parts. Products Including: Engine Assy: B,C,L series,QSB series, QSL series, ISDe series K19,K38,K50,NTA855,QSX15 ....Etc. Engine Spare Parts: Cylinder Block,Head,Crankshaft,Camshaft Piston kit,Gasket kit Connecting Rod Fuel pump,Injector,Water Pump Air compressor, Alternator, Start Motor ...Etc. Delivery Terms: 1)More stock for sale 2)Parcel will be sent in 24 hours after payment , by DHL,FEDEX,UPS. 3)More order, More discount
Rotogravure cylinder making line: 1. Electro-plating equipment for rotogravure printing cylinder (Including Washing, Nickel/Copper/Chrome Plating, Degreasing, De-chrome) 2. Rotogravure cylinder grinding machine 3. Copper polishing machine 4. Chrome polishing machine 5. Proofing machine 6. Engraving machine
Product name: scd series pneumatic cylinder Working temperature: 0~70 degree celsius Working speed range: 30~800mm/s Pressure: 0.5~8 kgf/cm Buffer type: adjustable buffer Features of scd series standard pneumatic cylinder 1. Double rod type. 2. It's tie rod cylinder. 3. There are several modes of back cover so that the installation of clinder wil be more convenient. 4. Various sizes of cylinders and mounting accessories for your choice. Remark: the medium used by the cylinder must be fitlered to 40 m or below.
We have been professionally producing high quality SDA Compact cylinders for more than ten years. It can effectively minimize the space requirements. A compact air cylinder functions in the same manner as a standard air cylinder with both single and double acting, single or double rod, and non-rotating models. However, compact cylinders minimize space requirements by allowing for precise, direct mounting in the least amount of space possible.
Features of SC Series Standard Pneumatic Cylinder: 1. Double acting type 2. It's tie rod cylinder 3. There are several modes of back cover so that the installation of clinder wil be more convenient 4. Various sizes of cylinders and mounting accessories for your choice Note: The medium used by the cylinder must be fitlered to 40m or below. Product Details: Acting Type: Double Acting Pressure Range: 0.05Mpa--0.8Mpa(7.3--116Psi) Working Temperature: 0--70 Degree Celsius Cushion: Adjustable Cushion Packing: In Cartons Proof Pressure: 1.35MPa(195psi) Working Speed Range: 50--800 mm/s
Specification of MAL Series Aluminum Cylinder: Bore: 16 20 25 32 40 Operation Type: Double Acting or Single Acting Working Medium: Air Pressure Range: 0.05Mpa--0.85Mpa(7.3--123Psi) Proof Pressure: 1.35MPa(217psi) Working Temperature: 0--70 Degree Celsius Working Speed Range: 50--800 mm/s Cushion: Gasket Cushioning Port Size: M5X0.8 G1/8 G1/4 Mounting Accessories: BASIC, LB, FA, SDB
FR.L combination and F.R.L combination is a device that conditions air for use in pneumatic systems. An frl is a combination filter-regulator-lubricator. Products Details: Max. Operating pressure:1.0mpa(145psi) Working temperature:5--60 Degree Celsius Capacity of oil cup: 90 cc Filtering grade:40μm Pressure range: 0.05--0.85mpa(7--123psi) Proof pressure: 1.5mpa(217psi) Capacity of filter cup: 60 cc
Smc pneumatic lubricator Model:al2000-02, al3000-03, al4000-04, al4000-06, al5000-10 Fluid: air Proof pressure: 1.5mpa(217psi) Max. Operating pressure: 1.0mpa(145psi) Ambient and fluid temperature: 5--60 Recommended lubricant: class 1 turbine oil(iso vg32)
Double jersey cylinder Brand: according to clients requirement Material: imported steel Diameter: 6, -68, Gauge:
Single jersey cylinder Brand: according to clients, requirement Material: imported steel Diameter: 6''-68'' Gauge:
Brand: according to clients, requirement Material: according to clients, requirement Diameter: according to clients, requirement Gauge: according to client, s requirement Tolerance:â±0.02mm
Our company is located in jiangsu province china, which is nearby shanghai, with two factories and one international trading company named taicang yongfa knitting machinery factory, taicang rixiao precision mechinery factory and taicang sinoch new materials co., ltd. Respectively. We specialize in manufacturing various cylinders of circular knitting machine and trading cylinders. Our factories offer premium cylinders, while the trading company provides global customers with outstanding services. The complete set of our equipment for fabrication is imported from taiwan so that our products can be processed with advanced quenching in order to ensure excellent performance. By utilizing the finest raw materials imported from japan and germany along with the latest technology, careful production procedures and enhanced customer services, customer satisfaction is largely achieved. Moreover, as one of the largest makers in china, our factories also participate in establishing chinese industrial standards. Currently, we have our own brand new machinery, such as slot milling machines, lathes, grinding machines and quench equipment. Therefore, we hereby welcome and invite both our clients and
Our Company mainly produce highly quality pneumatic air cylinders including SI, SC Standard cylinders, SDA Thin type compact air cylinders, DNC standard cylinder and MAL Mini cylinders.
It can be evenly injected into the compressed air mist. A regulator ensures that the amount of oil is proportional to the air flow. Compressed air through the nozzle when the pressure drop, forcing the oil from the oil cup from the oil window, while being atomized. The amount of drip in the screw is usually enough to contain 1-12 drops per 1000l of air.
We are specialized in Hydraulic Cylinder, Hydraulic fittings, Hydraulic shock absorber at an affordable price and good quality. provide OEM and ODM service to our customers in domestic and abroad. We manufacture: 1* Engineering machinery hydraulic cylinder 2* Agricultural machinery hydraulic cylinder 3*Logging/forest machinery hydraulic cylinder 4* City cleaning machines hydraulic cylinder 5*Lifting platform hydraulic cylinder 6* Auto-machinery hydraulic cylinder 7*Medical bed hydraulic cylinder 8* Tie rod hydraulic cylinder 9*High pressure hydraulic cylinder What seal type we used: NOK,PARKER, HALLITE or per customers request. What material we used : 45#steel, stainless steel or per customers request. Surface treatments: nickelplated, chromeplated, paint or per customers request Tell us what you want, we will manufacture what you need!
We can supply Large Capacity Jumbo Cylinders conforming to various national & international standards like NES 317, ISO 11120, BS 5045 etc. We can also supply such cylinders as per DOT 3T, 3AAX and ASME Codes against specific customer requirement and order
1.Model:HIW-60/D (HIW-90/S/D)(HIW-120/S/D)(HIW-160/S/D) processing Capacity(KN):600/900/120/160 max.punching capacity(diameter*thickness)mm:25*16/30/20/35/25/38*30 depth of throat(mm):300/355/400/600 ram stroke:80mm stroke times:8-22 times/min Shear Angle(°):7/8/8/8 2.Flate Shearing: flat bar(t*w)mm:16*250 20*330 25*330 30*355 8*400 10*480 16*600 20*600 3.Angle Shearing: 90° shearing (mm):120*10 45°shearing (mm):70*8mm 4.Bar Shearing: square bar:40mm round-bar:45mm TC-channel:126mm I-beam:80*126mm 5.Material Tensile Strength(Mpa):= 450 6.Motor Power(KW):4 7.Overall Dimension(mm):1650*800*1780 /1950*900*1930/2350*980*2100/2680*1060*2380 8.Weight(kg):1800/2600/4800/6800
1.Hole Punching : punching pressure:450kn max.punching capacity(diameter*thickness):38mm*8mm depth of throat:175mm ram stroke:50mm stroke times:8-22 times/min 2.Plate Shearing: max shearing thickness:15mm flat bar(w*t):200*15mm ; 300*12mm 3.Angle Steel Shearing:90° shearing of equal angle steel:100*100*10mm 45°shearing of equal angle steel :70*70*6mm 4.Profile Steel Shearing:round-bar:30mm square bar:30mm T-bar:40*7mm C-channel/I-beam:80*45mm 5.Notching:Thickness:8mm Width:35mm Depth:75mm 6.Material Tensile Strength:450N/m? 7.Motor Power:3kw 8.Overail Dimensions(L*W*H):1450*590*1620mm 9.Weight:1100kg
