Ultra-Clean is a fast-acting cleaner with degreasing effect and quick drying. Does not require any post-treatment and dries without leaving any residue. Ultra-Clean is neutral towards plastic and rubber as it is silicone-free. Non-corrosive and degreases without leaving any residue Weight 0.5kg Size 500ml
Size 1 litre 5 litres 10 litres 25 litres 200 litres Turpentine substitute for thinning oil and synthetic resin paints. For cleaning brushes, painting equipment, etc. Turpentine substitute is also an excellent cleaning agent for paint and dirt stains on linoleum, parquet and their surfaces. Slow evaporation. Weight n/a Size 1l, 5l, 10l, 25l, 200l
Filler and fine filler. Direct adhesion to all surfaces. Can be used in car repairs, metal industry and wood industry. One product for all applications. For filling deep and small uneven areas, even on vertical surfaces. For filling and fine filling. Creates a relatively smooth and pore-free surface. The fine-grained abrasion enables low abrasive consumption. Super easy to sand. Weight n/a Size 1kg, 1.5kg, 2kg
Polyester fine filler including white hardener. For filling any pores and unevenness that may still be present in the filler filler. Creates an absolutely smooth and pore-free surface. Fine filler with particularly smooth pulling properties; can also be used as a filler filler due to its thixotropy. The fine-grained abrasion enables low abrasive consumption. Super easy to sand. No discoloration thanks to the white hardener. Weight n/a Size 250g, 500g, 1kg
Purity % >99% Packaging Details 200 litre Drum Usage/Application Solvent in paints Grade Standard Industrial Grade Synonyms n-Butanol Physical State Liquid Uses of Butanol Butanol has been primarily used as a solvent found in paints and can also be utilized as a fuel. It is also used as a component of hydraulic and brake fluids. It is also used as a base for perfumes, but on its own has a highly alcoholic aroma. Butanol is a central nervous system depressant.This means that butanol can have effects like ethanol when ingested or drunk by living beings such as humans. First Aid Measures Eye Contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Skin Contact: Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician. Inhalation: Move to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms occur. Ingestion: Clean mouth with water and drink afterwards plenty of water.
Product Name Sodium percarbonate CAS 15630894 MW 12004 MFCH5NaO5 Appearance White powder Active Oxygen Content 13 Specification Test Specification Result Appearance Whitegood fluidity Whitegood fluidity Odour Odourless Odourless Active Oxygen Content wt 130 132 Bulk Density gL 920 951 pH Value 2530gL solution 100110 105 Moisturewt 2hours6020mm Hg vacuum 10 03 Fe content mgkg 15 7 Wet Stability 50 60 Heat Stability9024hours 70 83 P2O5 content 08 07
Item Quality Standards Characters White or almost white, crystalline powder or granular Identification Pass test Appearance of solution Pass test Assay 99.0%~100.5% Water 11.0%~13.0% Readily carbonisable substances Pass test Acidity or alkalinity Pass test PH (5%w/v) 7.5~9.0 Sulfate â?¤150 mg/kg Oxalate â?¤100 mg/kg Chloride â?¤50 mg/kg Lead â?¤1 mg/kg Arsenic â?¤1 mg/kg Mercury â?¤1 mg/kg Heavy metal (as Pb) â?¤10 mg/kg Tartrate Pass test Pyrogen Pass test Bacteria Endotoxins Pass test
SPECIFICATION Chemical Name sodium chloride chemical formula Nacl Sodium chloride Nacl present by mass 99.20% Matter soluble in water other then Nacl 3.13 Water soluble matter,present by mass 0.14 calcium as Ca,present by mass on dry 0.02 magnesium as Mg,water soluble 0.01 sulphate as so4 0.08 Moisture ,present by mass ,max 4.47
Soda Ash Specification: Item Soda Ash Dense Soda Ash Light Index Index Total alkali(quality fraction of Na2CO3 dry basis) 99.2% min 99.2% min NaCI (quality fraction of NaCI dry basis) 0.70% max 0.70% max Fe quality fraction (dry basis) 0.0035% max 0.0035% max Sulfate(quality fraction of SO4 dry basis) 0.03% max 0.03% max Water-fast substance in quality fraction 0.03% max 0.03% max Accumulation density(g/ml) 0.90% min Particle size, 180 �µ m sieving residue 70.0% min
UPAC Name Potassium carbonate Chemical formula K2CO3 CAS Number 584-08-7 EC Number 209-529-3 Potassium Carbonate, % 99.5% min Chloride (KCL), % 0.014% Sulfate (K2SO4), % 0.007% Ferric (Fe), % 0.0007% Water Insoluble, % 0.009% Heavy Metal (as Lead), mg/kg 8 Arsenic (As), mg/kg 1 Loss on drying, % 0.38% Appearance White Crystal/Granular