The mold and algae remover is an oxidative and disinfectant aqueous solution for removing mold and algae deposits on walls, paint, wallpaper, etc. Size 500ml 5 litres 10 litres 25 litres To empty The mold and algae remover removes mold and algae from many surfaces. In poorly ventilated rooms, in the basement and in the bathroom, mold can quickly form if the humidity is constantly high. This is particularly the case in bathrooms, especially after showering. Mold and mildew form. The mold spores are noticeable as dark spots on the tiles, walls and in the joints. The mold and algae remover from Winoil offers reliable, mild-odor and quick immediate help. The mold and algae remover from Winoil is an oxidative and disinfectant aqueous solution for removing mold and algae deposits on walls, paintwork, wallpaper, etc. The mold and algae remover from Winoil is suitable for a wide range of applications indoors and outdoors. Especially on tiles, wood, ceramics, masonry, stoneware, joints, silicone joints, plastic, plaster, bathrooms, toilets, showers, shower walls, saunas and swimming pools. Winoil's Mould and Algae Ex is particularly suitable for removing mould in damp rooms and basements. Weight n/a Size 500ml, 5l, 10l, 25l
Size 1 litre 3 litres 5 litres 10 litres 25 litres 200 litres A liquid, fast-acting paint remover for smooth surfaces. Can also be used as a cleaning agent against oils, greases, silicones, soot, etc. The product is ready to use and is sprayed directly onto the surface. Allow to take effect and then remove with plenty of water (high-pressure cleaner Weight n/a Size 1L, 3L, 5L, 10L, 25L, 200L
Size 1 litre 5 litres 10 litres 25 litres 200 litres Safety solvent for cleaning equipment in industry. Flash point approx. 45-50�°C. VOC-containing small parts cleaner with fast drying properties. It does not attack rubber or plastic. Removes greasy, oily dirt. For cleaning windings, starters, alternators, electric motors, etc Weight n/a Size 1l, 5l, 10l, 25l, 200l
Ultra-Clean is a fast-acting cleaner with degreasing effect and quick drying. Does not require any post-treatment and dries without leaving any residue. Ultra-Clean is neutral towards plastic and rubber as it is silicone-free. Non-corrosive and degreases without leaving any residue Weight 0.5kg Size 500ml
Size 1 litre 5 litres 10 litres 25 litres 200 litres Turpentine substitute for thinning oil and synthetic resin paints. For cleaning brushes, painting equipment, etc. Turpentine substitute is also an excellent cleaning agent for paint and dirt stains on linoleum, parquet and their surfaces. Slow evaporation. Weight n/a Size 1l, 5l, 10l, 25l, 200l
Filler and fine filler. Direct adhesion to all surfaces. Can be used in car repairs, metal industry and wood industry. One product for all applications. For filling deep and small uneven areas, even on vertical surfaces. For filling and fine filling. Creates a relatively smooth and pore-free surface. The fine-grained abrasion enables low abrasive consumption. Super easy to sand. Weight n/a Size 1kg, 1.5kg, 2kg
Polyester fine filler including white hardener. For filling any pores and unevenness that may still be present in the filler filler. Creates an absolutely smooth and pore-free surface. Fine filler with particularly smooth pulling properties; can also be used as a filler filler due to its thixotropy. The fine-grained abrasion enables low abrasive consumption. Super easy to sand. No discoloration thanks to the white hardener. Weight n/a Size 250g, 500g, 1kg
Product Name Sodium percarbonate CAS 15630894 MW 12004 MFCH5NaO5 Appearance White powder Active Oxygen Content 13 Specification Test Specification Result Appearance Whitegood fluidity Whitegood fluidity Odour Odourless Odourless Active Oxygen Content wt 130 132 Bulk Density gL 920 951 pH Value 2530gL solution 100110 105 Moisturewt 2hours6020mm Hg vacuum 10 03 Fe content mgkg 15 7 Wet Stability 50 60 Heat Stability9024hours 70 83 P2O5 content 08 07
Item Quality Standards Characters White or almost white, crystalline powder or granular Identification Pass test Appearance of solution Pass test Assay 99.0%~100.5% Water 11.0%~13.0% Readily carbonisable substances Pass test Acidity or alkalinity Pass test PH (5%w/v) 7.5~9.0 Sulfate â?¤150 mg/kg Oxalate â?¤100 mg/kg Chloride â?¤50 mg/kg Lead â?¤1 mg/kg Arsenic â?¤1 mg/kg Mercury â?¤1 mg/kg Heavy metal (as Pb) â?¤10 mg/kg Tartrate Pass test Pyrogen Pass test Bacteria Endotoxins Pass test
SPECIFICATION Chemical Name sodium chloride chemical formula Nacl Sodium chloride Nacl present by mass 99.20% Matter soluble in water other then Nacl 3.13 Water soluble matter,present by mass 0.14 calcium as Ca,present by mass on dry 0.02 magnesium as Mg,water soluble 0.01 sulphate as so4 0.08 Moisture ,present by mass ,max 4.47
Soda Ash Specification: Item Soda Ash Dense Soda Ash Light Index Index Total alkali(quality fraction of Na2CO3 dry basis) 99.2% min 99.2% min NaCI (quality fraction of NaCI dry basis) 0.70% max 0.70% max Fe quality fraction (dry basis) 0.0035% max 0.0035% max Sulfate(quality fraction of SO4 dry basis) 0.03% max 0.03% max Water-fast substance in quality fraction 0.03% max 0.03% max Accumulation density(g/ml) 0.90% min Particle size, 180 �µ m sieving residue 70.0% min
UPAC Name Potassium carbonate Chemical formula K2CO3 CAS Number 584-08-7 EC Number 209-529-3 Potassium Carbonate, % 99.5% min Chloride (KCL), % 0.014% Sulfate (K2SO4), % 0.007% Ferric (Fe), % 0.0007% Water Insoluble, % 0.009% Heavy Metal (as Lead), mg/kg 8 Arsenic (As), mg/kg 1 Loss on drying, % 0.38% Appearance White Crystal/Granular
Product Name Triethylene glycol Density 1119 gmL at 25 Clit CAS Number 112276 Boiling point 175290 C01 mm Hglit Purity 99 Place of Origin South Africa Appearance Transparent liquid Melting point 7 Clit Wholesale price CAS NO 112276 Triethylene glycol with high quality Test Description Specifications Test Result Appearance colorless and transparent liquid without suspension Purity wt 99 9962 Specific Gravity2020 1121511245 11234 Moisture wt 01 0006 Color PtCo 25 5 Diethylene glycolwt 05 004 Acidas CH3COOH wt 0005 0001 ASH wt 001 00008
Purity % 99.9 Color, (Pt-Co) (No. before heated) â?¤ addition of acid (heated) â?¤ 5 20 Density, (20)g/cm3 1.1131-1.1136 Water, %(m/m) â?¤ 0.05 Boiling range (0.0.10133Mpa Initial point â?¥ Dry point â?¤ IBP-DP 196 - 2 Acidity (calculated as), % (m/m) â?¤ 0.001 (calculated as formaldehyde), %(m/m) â?¤ 0.0008 Iron calculated as Fe2+), % m/m) â?¤ 0.00001 Ash, % (m/m) â?¤ 0.002 DEG and TEG, % (m/m) 0.1 Chlorine (calculated as chlorine ion), % (m/m) 0.00005 Ultraviolet transmittance % 220nm â?¥ 275nm â?¥ 350nm â?¥ 70 90 98