Usage This product can be used in all types of waterbased drilling fluid system and it can be added directly as a powder or into water
solution
Recommended Dosage 3050 Customers can adjust the dosage according to their actual situation
Package 1 The product is usually kept in multiwall bags with polythene layer inner and net weight of each bag is 25 kg
2 Special packages are available based on customers requirements
Container Capacity 2021 TON20FCL with pallet 2324 TON20FCL without pallet
Storage 1 The product should be kept in shady dry and ventilated warehouse where environment temperature is controlled below 122F and
relative humidity is under 50
2 It should be prevented from sun and rain and positioned in a place away from heat and fire the recommendation for bag piles is
no more than 8 layers
Manganese oxide is an oxide with the molecular formula MnO. It is a gray green powder. Insoluble in water, soluble in acid. Used as a catalyst, feed adjuvant, trace element fertilizer, and also in the manufacturing of pharmaceuticals, smelting, welding, and dry batteries. It can be obtained by thermal reduction of pyrolusite.
SODIUM DIISOBUTYL DITHIOPHOSPHATE C4H9O2PSSNa CAS:53378-51-1
Sodium dibutyl dithiophosphate is a good chemical reagents which is used as collector for non-ferrous metal and precious metal; Soluble in water; mainly used as flotation reagent for copper ores and zinc ores with high selective activities.Chemical and mining industries,chemical mineral processing reagent,acid reagent.
* Use: It has a wide range of uses. It can react with many ground substances, such as starch, cellulose, guar gum and polyacrylamide
and produce a variety of substances, which are widely used in paper industry, commodity chemical industry, petroleum industry, water treatment industry and other fields.
* Package: Plastic woven bag or paperboard cask, 20 or 25 kg per bag.
31804 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
Classification Aluminum oxide CAS 1344-28-1
another name Aluminum oxide
chemical formula Al2O3
EINECS 215-691-6
Grade Standard Medicine Grade, Reagent Grade
concentration 99%
appearance White amorphous powdery substance
use Functional ceramics, electronic ceramics
Product name Aluminum oxide
Product appearance White amorphous powdery substance
chemical formula Al2O3
molecular weight 101.961
CAS number 1344-28-1
EINECS 215-691-6
melting point 2050
Application Water treatment
Sodium butyl xanthoxanthate is a flotation reagent with strong collecting ability. It is widely used in the mixed flotation of various non-ferrous sulfide ores. The product is especially suitable for the flotation of chalcopyrite, sphalerite and pyrite. Under certain conditions, it can be used to preferentially flotation copper sulfide from iron sulfide ore, and it can also be used to collect sphalerite activated by copper sulfate.
Sodiumethyl xanthate is a collector with better selectivity, widely applied in flotation of Cu/Zn/Ne and pyrite, especially for the gold floatation in gold and copper mine. It could make good result in the copper and lead oxidized ore . Normally used in rough selecting and scavenging.Butyl xanthate.
Product alias: polyiron, SPFS
Product appearance: yellow or reddish brown powder
Solid production capacity: 60,000 tons/year
Production process: spray drying method
Packing specification: woven bag packing, 25KG/bag
Ferric sulfate is an excellent water purification agent, with good flocculation and adsorption, widely used in source water, drinking water, tap water, industrial water, domestic sewage treatment.Poly ferric sulfate has the following characteristics: low dosage;fast flocculation, large alum, rapid sedimentation;it can decolorize, sterilize, remove radioactive elements, reduce heavy metal ions, and reduce COD and BOD.It is the best cationic inorganic polymer flocculant.
Product Name: 2-Phosphonobutane -1,2,4-Tricarboxylic Acid(PBTCA) 50%
Synonyms : PBTCA 50%
M.F.: C7H11O9PCAS No.: 37971-36-1
Performance
Water Treatment chemical PBTCA, a good corrosion inhibitors, is widely used in circulating cool water system and oilfield water injection system antifouling treatment.
Water Treatment chemical PBTCA is used as a corrosion inhibitor for industrial water treatment. This product has excellent complexing ability with Ca2 +, Zn2 +, Cu2 +, Mg2 +.
The suitable PH range is from 7.0 to 9.5. It can operate at high temperature, high hardness, and high alkalinity conditions.
It allows coolingwater concentration factor increased to seven or more.
Aluminium photosphate white rhombic crystal or powder. Relative density 2.566. Melting point>1500 C. Insoluble in water, soluble in concentrated hydro chlori acid, concentrated acid, alkali, and alcohol.
At 580 C, the Chemicalbook is relatively stable, and at 1400 C, it does not melt and becomes a colloidal substance. Between room temperature and 1200 C, aluminum phosphate has four crystal forms, commonly known as Type.
Potassium hydroxide, is a kind of inorganic compound, chemical formula KOH, melting point 361, boiling point 1320, potassium hydroxide commonly known as caustic potassium, potassium ash, etc., industrial products are mainly in two forms, respectively solid and liquid, of which solid is white or light gray sheet, block rod, chemical properties and sodium hydroxide similar, has a strong alkaline and corrosive, Easily soluble in water and will release a lot of heat, and delixing, easy to absorb moisture in the air and delixing, absorb carbon dioxide into potassium carbonate. Mainly used in leather, paper, printing and dyeing, sewage treatment and other fields; Food grade potassium hydroxide is mainly used in pharmaceutical intermediates, various potassium salts, food additive ingredients, food processing containers cleaning, disinfection and other fields.
Physical and chemical properties CAS NO:67-48-1 Structural formula: HOCH2CH2N (CH3) 3Cl Molecular formula: C5H14ClNO Molecular weight: 139.63 Content (%): 50%, 60%, 98% Melting point (�ºC): 302 ~ 305 (decomposition) Toxicity LD50 (mg/kg): rat, 6640 by mouth character White hygroscopic crystal, tasteless, with fishy smell. Mp240�ºC. 10% aqueous solution pH5-6, unstable in alkaline solution. Solubility: easily soluble in water and alcohols, almost neutral in water solution, insoluble in ether, petroleum ether, benzene and carbon disulfide. Slightly fishy, salty and bitter, easy to deliquescence, unstable in alkaline solution.
Choline chloride is an organic substance with the chemical formula of C5H14ClNO. It is a white hygroscopic crystal, tasteless, and has a fishy smell. The melting point is 305 �ºC. 10% aqueous solution pH5-6, unstable in alkaline solution. This product is easily soluble in water and ethanol, but insoluble in ether, petroleum ether, benzene and carbon disulfide. Low toxicity, LD50 (rat, oral) 3400 mg/kg. It is used to treat fatty liver and liver cirrhosis. It can also be used as a feed additive for livestock, which can stimulate the ovary to produce more eggs, litter and gain weight of livestock and fish.
Product Name Avobenzone
CAS 70356-09-1
Purity 99%
Appearance white powder
MOQ 10g
Melting point 81-84 C
Boiling point 463.6±35.0 C(Predicted)
Density 1.079
Flash point /
Refractive index
Usage organic synthesis intermediates
Storage conditions Inert atmosphere,Room Temperature
Benzophenone is a colorless prismatic crystal with sweet taste and rose fragrance. It has a melting point of 47-49C, a relative density of 1.1146, and a refractive index of 1.6077.
It is soluble in organic solvents and monomers such as ethanol, ether and chlor form, but insoluble in water. It is a free radical photoinitiator, mainly used in free radical UV curing systems, such as coatings, inks, adhesives, etc. It is also an intermediate for organic pigments and fragrances.
This product is also a styrene polymerization inhibitor and a fragrance fixer, which can impart a sweet smell to the fragrance, and is widely used in perfume and soap flavors.
During storage and transportation, the product should be protected from moisture, sun, and away from heat sources, and its temperature should not exceed 45C.
Citric Acid
Citric Acid (CA for short, also known as citric acid) is an important organic acid, colorless crystal appearance, odorless, easily soluble in water. According to its different water content, it is divided into monohydrate citric acid and anhydrous citric acid. The calcium salt of citric acid is easily dissolved in cold water than in hot water, this property is commonly used to identify and separate citric acid, and anhydrous citric acid can be obtained by controlling the appropriate temperature when crystallizing, which has many uses in industry, food industry, cosmetic industry, etc.
Antimony trioxide Sb2O3 CAS 1309-64-4
Antimony trioxide mostly used as synesis which with halogen flame retardant in most of polymer materials compounding. It is also can be used as clarifier additive inside glass making. And used for ceramic glaze and pigment & coating. Main application: The product is mainly applied to the industries of plastics, rubber, chemical fiber, paint, enamel, pigments, glass and electronics. Physical and chemical indicators and its characters: the main content is between 98.00-99.90 percent and it also can be produced according to the requirements of customers. And the average particle size can be determined according to the requirements of customers.1. Used as a fire retardant in the membranes of plastic industry, the enclosures of electric devices and household electric
